Z-Spar Gooseneck Brackets


Standard Gooseneck Brackets
Gooseneck Bracket Ass'y for Z105 & Z125 Masts: Z-1150XAC: Gooseneck Bracket Assembly is used on Z105 and Z125 mast sections with Z-120 Boom. Assembly includes cast Bracket, Z-1121X Gooseneck Toggle Shaft, and Z-1495AX Gooseneck Hook Pin with nut. Bracket fastens to mast with (4) 3/16" (5mm) rivets.
	Gooseneck Bracket for Z105 & Z125 Masts: Z-1150X: Cast aluminum Gooseneck Bracket is used on Z105 and Z125 mast sections with Z-1121X Gooseneck Toggle Shaft, and Z-1495AX Gooseneck Hook Pin with nut. Bracket is 1 3/4" (46mm) high x 1 3/4" (46mm) wide, and fastens to mast with (4) 3/16" (5mm) rivets.
	Z120 Toggle Shaft w/ Ball for Dinghy Gooseneck: Z-1121X: Bronze Toggle Shaft with 5/8" Ball end and 10mm (3/8") shaft. Unit is 46mm (1 13/16") long. As used on Capri 16.5 (1995), & others.
	Vertical Gooseneck Hook Pin w/ Locknut: Z-1495AX: Vertical Gooseneck Pin / Tack Hook is used with Z-1150X Gooseneck Bracket and Z-1121X Gooseneck Toggle Shaft. Stainless Steel Pin is 5mm (3/16") diameter x (maximum) 70mm (2 3/4") long, with a SS locknut.

Gooseneck Bracket Half, Small: Z-1061X: Unique cast aluminum Gooseneck Bracket is used in pairs with Z-1188X Gooseneck Toggle. Used on Z170, Z190, Z230, Z265, Z301, Z320 and other mast sections, Bracket Half measures 2 5/8" (67mm) high x 1 5/8" (42mm) wide, with 15mm recess for pin (lug). Fastens to mast with (4) 1/4" (6mm) rivets on 45mm (1 3/4") vertical centers. As used on Beneteau First 285, O'Day 272, and others. CK**
Gooseneck Bracket Half, Large: Z-1190X: A larger version of Z-1061X (above), this cast aluminum Gooseneck Bracket is used in pairs with Z-1189X Gooseneck Toggle. Used on Z401, Z501 and other mast sections, Bracket Half measures 3" (77mm) high x 2 1/4" (56mm) wide, with 18mm recess for pin (lug). Fastens to mast with (4) 1/4" (6mm) rivets. CK**

SS Gooseneck Bracket, Short: Z-1478: Formed SS Gooseneck Bracket is used on Z145 and larger mast sections with Z-1034 Gooseneck and Z-560 and Z-4066 Vang Toggles. Bracket takes 8mm vertical pin and has clearance for 2 1/8" (55mm) Toggle. Used on Z145, Z170, Z190, Z230, Z265, Z290, Z301 and other mast sections, Bracket measures 2 7/16" (61mm) high x 2" (50mm) wide. Fastens to mast with (8) 3/16" (5mm) rivets.
SS Gooseneck/ Vang Bracket, Long: Z-1787: Formed SS Gooseneck/ Vang Bracket is identical to Z-1478 (above), but measures 3" (72mm) high with clearance for 2 3/4" (70mm) toggle. Note: According to Z-Spar, this Bracket (with an 8mm Pin) is meant to be used with Z-1095 Vang Toggle (which has hole for a 12mm Pin).
Gooseneck Bracket for Z145 - Z301 Masts: Z-1478C: Cast aluminum Gooseneck Bracket is used on Z145 and larger mast sections with Z-1034 Gooseneck and Z-560 Vang Toggles. Bracket takes 8mm vertical pin and has clearance for up to 2 1/4" (57mm) toggle. Used on Z145, Z170, Z190, Z230, Z265, Z290, Z301, Z320, and other mast sections, Bracket measures 3 1/2" (88mm) high x 2 1/8" (54mm) wide. Fastens to mast with (8) 1/4" (6mm) rivets.
	Vertical Gooseneck Bolt Ass'y - 8mm: Z-1478BA: 8mm SS Gooseneck Bolt Assembly is used to connect Mast Bracket to Gooseneck Toggle, Z-1247X. Vertical Bolt is 8mm (5/16") x 100mm (4") long, Assembly includes nylon washers and locknut. -5

Gooseneck Bracket for Z401 - Z701 Masts: Z-1062: Small cast aluminum Gooseneck Bracket is used on Z401, Z501, Z531, Z601, Z701 and other mast sections with Z-1075X or Z-4010 Gooseneck Toggles, or Z-1195 Vang Toggle. Bracket takes 12mm vertical pin (Z-1291) and has clearance for 3" (76mm) toggle, and measures 4 9/16" (115mm) high x 3" (76mm) wide. Fastens to mast with (10) 1/4" (6mm) rivets.
Gooseneck Bracket for Z601 - Z901 Masts: Z-4096: Large cast aluminum Gooseneck Bracket is used on Z601, Z701, Z901 and other mast sections with Z-1075X or Z-4010 Gooseneck Toggles, or Z-1195 Vang Toggle. Bracket takes 12mm vertical pin (Z-1291) and has clearance for 3" (76mm) toggle, and measures 4 5/8" (118mm) high x 3 1/8" (80mm) wide. Fastens to mast with (8) 1/4" (6mm) rivets and (2) 5/16" (8mm) RH screws. On Z901 Mast Section, use with SS Reinforcing Plate, Z-1461K (below), for additional strength. 4009
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-1062, and Z-4096 and other Gooseneck Brackets. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place. h@54
	Gooseneck Bracket Reinforcing Plate w/ Screws: Z-1461K: SS Reinforcing Plate for use with larger Gooseneck Brackets. Unit slides in track under Gooseneck Bracket, 8mm screws (included) go through holes in Bracket and thread into tapped plate. SS Plate is 25mm wide x 76mm long x 5mm thick, with (2) 8mm tapped holes on 30mm centers. Used with Gooseneck Brackets on Z901 and larger Mast Sections, and on Z600E and larger furling sections.

Gooseneck Bracket for Z901 - Z1400 Masts: Z-138E: Large extruded aluminum Gooseneck Bracket is used on Z901, Z902, Z1001, Z1101, Z1400 and other mast sections with Z-1187 Gooseneck Toggle or Z-1178 Vang Toggle. Bracket takes 14mm vertical bolt and has clearance for 3 1/8" (80mm) Toggle. Unit measures 5 5/16" (135mm) high x 3 1/2" (89mm) wide. Fastens to mast with (8) 1/4" (6mm) rivets and (2) 8mm (5/16") RH screws. Use with SS Reinforcing Plate, Z-1461K (below), for additional strength.
	Gooseneck Bracket Reinforcing Plate w/ Screws: Z-1461K: SS Reinforcing Plate for use with larger Gooseneck Brackets. Unit slides in track under Gooseneck Bracket, 8mm screws (included) go through holes in Bracket and thread into tapped plate. SS Plate is 25mm wide x 76mm long x 5mm thick, with (2) 8mm tapped holes on 30mm centers. Used with Gooseneck Brackets on Z901 and larger Mast Sections, and on Z600E and larger furling sections.
	Vertical Gooseneck Bolt Ass'y - 14mm: Z-138BA: 14mm SS Gooseneck Bolt Assembly is used to connect Mast Bracket to Gooseneck Toggle, Z-1187. Vertical Bolt is 14mm (9/16") x 160mm (6 1/4") long, Assembly includes nylon washers and locknut.

Gooseneck Brackets for Furling Masts
Gooseneck Bracket for Z300E - Z500E Furling Masts: Z-1063F: Cast aluminum Gooseneck Bracket is used on Z300E, Z400E, Z500E and other mast sections with Z-1083X, Z-1075X or Z-4010 Gooseneck Toggles, or Z-1195 Vang Toggle. Bracket takes 12mm vertical pin and has clearance for 3" (76mm) toggle, and measures 4 9/16" (115mm) high x 3" (76mm) wide. Fastens to mast with (6) 1/4" (6mm) rivets and (2) 5/16" (8mm) RH screws.
Gooseneck Bracket for Z600E - Z900E Furling Masts: Z-1074F: Small cast aluminum Gooseneck Bracket is used on Z600E, Z700E, Z800E, Z900E and other mast sections with Z-1075X or Z-4010 Gooseneck Toggles, or Z-1195 Vang Toggle. Bracket takes 12mm vertical pin and has clearance for 3" (76mm) toggle, and measures 4 9/16" (115mm) high x 3" (76mm) wide. Fastens to mast with (6) 1/4" (6mm) rivets and (2) 5/16" (8mm) RH screws. Use with SS Reinforcing Plate, Z-1461K (below), for additional strength.
Gooseneck Bracket for Z600E - Z900E Furling Masts: Z-4008F: Large cast aluminum Gooseneck Bracket is used on Z600E, Z700E, Z800E and Z900E mast sections with Z-1075X or Z-4010 Gooseneck Toggles, or Z-1195 Vang Toggle. Bracket takes 12mm vertical pin and has clearance for 3" (76mm) toggle, and measures 4 5/8" (118mm) high x 3 1/8" (80mm) wide. Fastens to mast with (8) 1/4" (6mm) rivets and (2) 5/16" (8mm) RH screws. Use with SS Reinforcing Plate, Z-1461K (below), for additional strength.
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-1063F, Z-1074F, Z-4008F and other Gooseneck Brackets. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place.
	Gooseneck Bracket Reinforcing Plate w/ Screws: Z-1461K: SS Reinforcing Plate for use with larger Gooseneck Brackets. Unit slides in track under Gooseneck Bracket, 8mm screws (included) go through holes in Bracket and thread into tapped plate. SS Plate is 25mm wide x 76mm long x 5mm thick, with (2) 8mm tapped holes on 30mm centers. Used with Gooseneck Brackets on Z901 and larger Mast Sections, and on Z600E and larger furling sections.

Gooseneck Bracket for Z1100E - Z1400E Furling Masts: Z-138E: Large extruded aluminum Gooseneck Bracket is used on Z1100E and Z1400E and other mast sections with Z-1187 Gooseneck Toggle or Z-1178 Vang Toggle. Bracket takes 14mm vertical bolt and has clearance for 3 1/8" (80mm) Toggle. Unit measures 5 5/16" (135mm) high x 3 1/2" (89mm) wide. Fastens to mast with (8) 1/4" (6mm) rivets and (2) 8mm (5/16") RH screws. Use with SS Reinforcing Plate, Z-1461K (below), for additional strength.
	Gooseneck Bracket Reinforcing Plate w/ Screws: Z-1461K: SS Reinforcing Plate for use with larger Gooseneck Brackets. Unit slides in track under Gooseneck Bracket, 8mm screws (included) go through holes in Bracket and thread into tapped plate. SS Plate is 25mm wide x 76mm long x 5mm thick, with (2) 8mm tapped holes on 30mm centers. Used with Gooseneck Brackets on Z901 and larger Mast Sections, and on Z600E and larger furling sections.
	Vertical Gooseneck Bolt Ass'y - 14mm: Z-138BA: 14mm SS Gooseneck Bolt Assembly is used to connect Mast Bracket to Gooseneck Toggle, Z-1187. Vertical Bolt is 14mm (9/16") x 160mm (6 1/4") long, Assembly includes nylon washers and locknut.

Your cart

Spars, Rigging, and Hardware for Sailboats