Z-Spar Gooseneck Toggles


Gooseneck Toggle Shaft w/ Ball for Z120 Boom: Z-1121X: Bronze Toggle Shaft with 5/8" Ball end and 10mm (3/8") shaft is used on Z-120 Boom with Z-105 and Z-125 Masts. Unit is 46mm (1 13/16") long. Used with Z120 Boom. As used on Capri 16.5 (1995), & others.

Old-style Gooseneck Toggle w/ Integral Lugs & Boom Key: Z-1188XK:
Old-style Gooseneck Toggle with integral 12mm lugs (top and bottom) which act as a vertical pin. Used with 16mm OD plastic bushings (Z-1766) and (2) *Z-1061X* Gooseneck Brackets. Cast Aluminum Toggle is 23/32" (18.5mm) wide with Integral Gooseneck Brackets Lugs and Boom Key Lugs, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 2 7/8" (73mm) vertical x 2 3/4" (68mm) horizontal. Used with Z120 Boom. As used on Beneteau First 25, and others. This item is no longer available and is shown here for identification only.
Old-style Gooseneck Toggle w/ Integral Lugs, Small: Z-1188X: Old-style Gooseneck Toggle with integral 12mm lugs (top and bottom) which act as a vertical pin. Used with 16mm OD plastic bushings (Z-1766) and (2) *Z-1061X* Gooseneck Brackets. Cast Aluminum Toggle is 23/32" (18.5mm) wide with 10mm hole for horizontal pin, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 2 7/8" (73mm) vertical x 2 3/4" (68mm) horizontal. Used with Mast Sections through Z320 with Z160 and Z204 Booms. As used on Beneteau First 285, O'Day 272, and others. CK**
	Gooseneck Toggle Bushing - 16mm OD: Z-1766: Gooseneck Toggle Bushing is used (2 ea.) with Z-1188 Gooseneck Toggles. Plastic Bushing is 16mm OD x 12mm ID x 12mm long.
Old-style Gooseneck Toggle w/ Integral Lugs, Large: Z-1189X: Old-style Gooseneck Toggle with integral 16mm lugs (top and bottom) which act as a vertical pin. Used with 18mm OD plastic bushings (Z-1766L) and (2) Z-1190X Gooseneck Brackets. Toggle is 23/32" (18.5mm) wide with 10mm hole for horizontal pin, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 3 3/8" (86mm) vertical x 2 7/8" (73mm) horizontal. Used with Z401, Z501, and other Mast Sections with Z204 and Z360 Booms. 4151 CK**
	Gooseneck Toggle Bushing - 20mm OD: Z-1766L: Gooseneck Toggle Bushing is used (2 ea.) with Z-1189 Gooseneck Toggle. Split Plastic Bushing is 20mm OD x 16mm ID x 13mm long.

Gooseneck Toggle for 8mm Vertical Pin: Z-1247X: Cast aluminum Gooseneck Toggle rides on an 8mm vertical pin. Toggle is 23/32" (18mm) wide with 10mm hole for horizontal pin, 6mm hole for tack shackle, and can be used with Z-1188RH double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/16" (55mm) high, Toggle (overall) measures (maximum) 3 1/4" (84mm) vertical x 2 1/4" (56mm) horizontal x 23/32" (18mm) wide. Used on Z160 Boom with Z-1478 SS, and Z-1478C Aluminum Gooseneck Brackets.
	Vertical Gooseneck Bolt Ass'y - 8mm: Z-1478BA: 8mm SS Gooseneck Bolt Assembly is used to connect Mast Bracket to Gooseneck Toggle, Z-1247X. Vertical Bolt is 8mm (5/16") x 100mm (4") long, Assembly includes nylon washers and locknut. -5
	Tack Shackle: Z-1075TS: Tack Shackle to fit the Z-1247X and other Gooseneck Toggles. Wide SS Shackle has 5mm (3/16") screw pin, inside of Shackle is 19mm (3/4") wide x 37mm (1 7/16") high. 15589
	*Double Reef Hook - 8mm: Z-1188RH:* SS Double Reef Hook for use with Gooseneck Toggles listed above. Reef Hook is formed from 8mm rod and measures (maximum) 4 1/8" (105mm) wide x 3 1/8" (80mm) high. Specially formed Reef Hook slides into center hole of Toggle, or Toggle slot and is held in place by vertical Toggle Pin.

Short Gooseneck Toggle for Z204 & Z360 Booms: Z-1083X: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 1/16" (53mm) high, Toggle (overall) measures (maximum) 3 3/4" (97mm) vertical x 3 1/8" (80mm) horizontal x 1" (25mm) wide. Used on Z204 & Z360 Booms.
Gooseneck Toggle for Z204 & Z360 Booms: Z-1083: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin (Z-1291). Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/4" (70mm) high, Toggle (overall) measures (maximum) 4 1/2" (114mm) vertical x 3 1/8" (80mm) horizontal x 1" (25mm) wide. Used on Z204 & Z360 Booms.
Gooseneck Toggle for Z204 & Z360 Booms: Z-1075X: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin (Z-1291). Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/4" (70mm) high, Toggle (overall) measures (maximum) 4 1/2" (114mm) vertical x 3" (76mm) horizontal x 1 3/32" (28mm) wide. Used on Z204 & Z360 Booms. This part is no longer available and has been replaced by the Z-1083, above. 1074
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-1075X, Z-1083, Z-1083X and other Gooseneck Toggles. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place. h@54
	Tack Shackle: Z-1075TS: Tack Shackle to fit Gooseneck Toggles listed above. Wide SS Shackle has 5mm (3/16") screw pin, inside of Shackle is 19mm (3/4") wide x 37mm (1 7/16") high. 15589
	*Double Reef Hook: Z-1075RH:* SS Double Reef Hook for use with Z-1075X, and Z-1083 Gooseneck Toggles listed above. Reef Hook is formed from 10mm rod and measures (maximum) 4 5/8" (118mm) wide x 4 1/4" (108mm) high. Specially formed Reef Hook slides into center hole of Toggle, or Toggle slot and is held in place by vertical Toggle Pin. 1493

Gooseneck Toggle w/o Tack for Z480 Boom: Z-4010M: Special Gooseneck Toggle for use with Z480 standard Gooseneck is as Z-4010, below, but modified to eliminate the Tack attachment portion. Toggle has holes for a 12mm vertical bolt and a 10mm horizontal pin. Toggle is 3" (75mm) high x 3 3/8" (87mm) horizontal (maximum) x 1 1/4" (31mm) wide. Commonly used with Furling Masts. Used on Z480 Boom. As used on the Lagoon 410, and others.
Gooseneck Toggle for Z480 Boom: Z-4010: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle (overall) measures (maximum) 4 5/8" (118mm) vertical x 3 3/8" (87mm) horizontal. Used on Z480 Boom.
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-4010 and other Gooseneck Toggles. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place.
	Tack Shackle *for Z-4010 Gooseneck Toggle*: Z-4010TS: Special Wide Tack Shackle to fit the Z-4010 Gooseneck Toggle. Wide SS Shackle has 6mm (1/4") screw pin, inside of Shackle is 32mm (1 1/4") wide.
	*Double Reef Hook for Z-4010 Gooseneck Toggle: Z-4010RH:* SS Double Reef Hook for use with Z-4010 Gooseneck Toggle. Reef Hook is formed from 10mm rod and measures (maximum) 5" (125mm) wide x 4" (100mm) high. Specially formed Reef Hook slides into center slot in Toggle, and is held in place by vertical Toggle Pin.

Gooseneck Toggle for 14mm Vertical Pin: Z-1187: Heavy cast aluminum Gooseneck Toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide. Used on Z601 Boom through Z1001 Boom Sections.
	Vertical Gooseneck Bolt Ass'y - 14mm: Z-138BA: 14mm SS Gooseneck Bolt Assembly is used to connect Mast Bracket to Gooseneck Toggle, Z-1187. Vertical Bolt is 14mm (9/16") x 160mm (6 1/4") long, Assembly includes nylon washers and locknut.

Your cart

Spars, Rigging, and Hardware for Sailboats