 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-Spar Vang Toggles |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-Spar Vang Toggles |
|
|
|
|
| Z-Spar uses a variety of cast aluminum Vang Toggles that are
designed for use with their standard Gooseneck Brackets, See
Z-Spar Gooseneck and Vang Brackets. To order a Vang Toggle not
listed below please specify Mast Section, and Toggle or Bracket dimensions
when inquiring. |
|
|
||
|
Vang Toggle - 8mm: Z-560: Cast aluminum vang toggle rides on an 8mm vertical pin. Features 8mm horizontal hole in 1/4" (6mm) thick tab. Toggle measures 2 3/16" (55mm) vertical x 2" (50mm) horizontally (max.). Used on Mast Sections up to Z331.
|
|
|
|
Vang Toggle - 8mm: Z-4066: Cast aluminum vang toggle rides on an 8mm vertical pin. Features 10mm horizontal hole in 1/2" (13mm) thick boss. Toggle measures 2 3/16" (55mm) vertical x 2" (50mm) horizontally (max.). Heavier version of Z-560, above, for use with Z-Spar medium solid Vang. Used on Mast Sections up to Z351.
|
|
|
|
|
Vang Bracket Ass'y w/ Toggle - 8mm: Z-4066VBA: Cast aluminum Vang Bracket Assembly with toggle is used on Z145 and larger mast sections up to Z351. Toggle, Z-4066, features 10mm horizontal hole in 1/2" (13mm) thick boss, Bracket, Z-1478C, measures 3 1/2" (88mm) high x 2 1/8" (54mm) wide and fastens to mast with (8) 1/4" (6mm) rivets.
|
|
|
|
||
|
Vang Toggle - 12mm: Z-1195: Cast aluminum vang toggle rides on a 12mm vertical pin. Features 10mm (upper) and 12mm holes in 1/2" (13mm) thick boss. Toggle measures 2 3/4" (68mm) vertical x 2 5/8" (66mm) horizontally (max.).
|
|
|
|
|
||
|
Vang Toggle - 14mm: Z-1178: Cast aluminum vang toggle rides on a 14mm vertical pin, and is 1 1/16" (28mm) wide with a 12mm horizontal hole. Toggle measures 3 1/8" (80mm) vertical x 2 1/2" (63mm) horizontally (max). This is one of several different units that may be labeled 1178.
|
|
|
|
Vang Toggle - 14mm: Z-1178N: Cast aluminum vang toggle rides on a 14mm vertical pin, and is 1 1/16" (28mm) wide with a 12mm horizontal hole. Toggle measures 3 1/8" (80mm) vertical x 2 1/2" (63mm) horizontally (max), and features (2) 10mm holes for attachment of Vang tackle. This is one of several different units that may be labeled 1178. |
|
|
