 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Outhaul Slides & Cars
|
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Outhaul Slides & Cars
|
|
|
|
|
|
Outhaul Slides & Cars for Booms w/ an Add-on Track For 1" T-Track For 1 1/4" T-Track For 5/8" Sailtrack Cars for 3/4" I-Beam Track (NF 1159 & Kenyon KT-4540)
Cars for Nicro-Fico NF 1100 Recirculating Ball Track Please note that what are usually referred to as Traveller Slides are also frequently used on Booms as Outhaul Slides, See: Traveller Slides. For Track compatible with the items listed
here,
See: Track. |
||
|
|
||
| Outhaul Slides for 1" T-Track | ||
|
Outhaul Slide Assembly for 1" T-Track: Sch 95-01X: Light-duty Outhaul Slide Assembly features channel with 1/4" captive Key Pin for clew attachment, and a welded SS Eye for attachment of Outhaul line or Block. Slide body is formed SS with welded Eye and 1/2" ID channel for Clew. Slide is 3" long x 1 1/8" wide, and 2 1/4" (maximum) high. For Booms using a 1" Outhaul T-Track.
|
 |
|
|
Outhaul Slide Ass'y w/ Sheave for 1" T-Track: RF-336: Low friction Outhaul Slide Assembly features channel with 3-position clew attachment using 1/4" clevis pin, and 3/4" OD x 1/4" thick wire Sheave for a 2 part purchase using wire up to 1/8". When additional purchase is not desired, sheave can be used for direct attachment of outhaul pennant. Slide body is formed SS with polyethylene track liners (RF-987), and 5/8" ID channel for Clew. Slide is 3 3/4" long x 1 1/4" wide, and 2" (maximum) high. For Booms using a 1" Outhaul T-Track.
|
||
|
Outhaul Slide Ass'y w/ Sheave for 1" T-Track: RR 95-T1-22: Heavy-duty Outhaul Slide Assembly features channel with 2-position clew attachment using 5/16" clevis pin, and 1 1/16" OD x 1/2" wide phenolic Sheave for a 2 part purchase using up to 3/8" line. Slide body is formed SS with welded sheave cage and 15/16" ID channel for Clew. Slide is 4" long x 1 1/4" wide, and 2 1/2" (maximum) high. For Booms using a 1" Outhaul T-Track.
|
 |
|
|
|
||
| Outhaul Slides for 1 1/4" T-Track | ||
|
Bronze Outhaul Slide for 1 1/4" T-track: RR 95-T14B-F: Heavy-duty cast Bronze Outhaul Slide with Toggle for 1 1/4" T-Track. Toggle allows for 2 clew positions with a 3/8" pin and has 3/4" inside clearance for large clew rings. Slide features 3/8" pin for Toggle and (2) holes for 1/8" wire outhaul pennant attachment. Slide is 4 1/4" long x 1 11/16" wide x (maximum) 3 3/4" high, and fits US standard 1 1/4" x 3/16" T-track. Fam R
|
||
|
Chrome Bronze Outhaul Slide for 1 1/4" T-track: Fam 3165CB: Heavy-duty cast Chrome-plated Bronze Outhaul Slide with Toggle for 1 1/4" T-Track. Toggle allows for 2 clew positions with a 1/2" pin and has 7/8" inside clearance for large clew rings. Slide features 1/2" pin for Toggle and hole for up to 3/16" wire outhaul pennant attachment. Slide is 3 7/8" long x 1 11/16" wide x (maximum) 4 3/8" high, and fits US standard 1 1/4" x 3/16" T-track. Fam
|
 |
|
|
Stainless Steel Outhaul Slide for 1 1/4" T-track: K-11172: This Heavy-duty SS Outhaul Slide was designed for use on larger yachts. Investment cast SS construction provides high strength at a minimum weight. The toggle allows for 2 clew positions with a 1/2" pin and has 1" inside clearance for extra large clew rings. Slide features 3/8" pins for toggle and outhaul pennant attachment. Captive plastic liners (K-11175), below, are included and allow unit to slide freely on US standard 1 1/4" x 3/16" T-track. Slide is 4 1/2" long x 1 11/16" wide x (maximum) 4 5/16" high. Suitable for use on a variety of yachts from 35 to 60 feet.
|
 |
|
|
|
Liners for K-11172 Outhaul Slide: K-11175P: Replacement Liners for K-11172 Outhaul Slides. Polyethylene Slide Liners are 4 3/16" long. K-11175P consists of 2 pieces.
|
|
|
|
||
| Outhaul Slides for 5/8" Sailtrack | ||
|
Simple Outhaul Slide for 5/8" Sailtrack: Ken K-95-51L: Simple Outhaul/Traveller Slide features welded ring with 3/4" ID for clew shackle and attachment of outhaul pennant. Formed Stainless Steel Slide is 1 3/4" long. For Booms with 5/8" Sailtrack.
|
 |
|
|
Small Outhaul Slide for 5/8" Sailtrack: RL-324X: Outhaul Slide Assembly features channel with 3 position Clevis Pin for clew attachment, and a riveted loop for attachment of Outhaul line, shackle, or block. Slide body is formed Stainless Steel with 1/2" ID channel for Clew. Slide is 1 3/8" long and 1 1/2" (maximum) high. For Booms with 5/8" Sailtrack.
|
 |
|
|
Outhaul Slide for 5/8" Sailtrack: Ken K-245SM: Outhaul Slide Assembly features channel with 3/16" captive Key Pin for clew attachment, and a welded loop for attachment of Outhaul line, shackle, or block. Slide body is formed Stainless Steel with welded loop and 5/8" ID channel for Clew. Slide is 2" long and 1 1/2" (maximum) high, Pin bearing surface is 1" above top of track. For Booms with 5/8" Sailtrack. D40060
|
 |
|
|
Outhaul Slide w/ Nylon Sheave for 5/8" Sailtrack: RL-362X: Outhaul Slide Assembly with Nylon Sheave features channel with 1/4" captive Key Pin for clew attachment, and 1" OD x 1/4" thick Sheave for a 2 part purchase using wire up to 3/32", or line up to 1/8". Slide body is formed Stainless Steel with 5/8" ID welded channel for Clew. Slide is 2 5/8" long and 1 5/8" (maximum) high, Pin bearing surface is 1 1/8" above top of track. For Booms with 5/8" Sailtrack.
|
|
|
|
Outhaul Slide w/ SS Sheave for 5/8" Sailtrack: Ken K-246-5SM: Outhaul Slide Assembly with Stainless Steel Sheave features channel with 3/16" captive Key Pin for clew attachment, and 1" OD x 1/8" thick SS Sheave for a 2 part purchase using wire up to 3/32". Slide body is formed Stainless Steel with 5/8" ID welded channel for Clew. Slide is 2 1/4" long and 1 1/2" (maximum) high, Pin bearing surface is 1" above top of track. For Booms with 5/8" Sailtrack. D40062
|
 |
|
| Outhaul Slide w/ Alum. Sheave for 5/8" Sailtrack: Ken K-246-5D: | ||
|
Deluxe Lightweight Outhaul Slide with Aluminum Sheave features channel with 1/4" captive Key Pin
for clew attachment, and 1 3/16" OD x 1/8" thick Sheave for a 2 part purchase using wire up to
3/32".
Sheave and cheek feature lightening holes for maximum weight reduction. Slide body is formed
Stainless Steel with 1/2" ID welded channel for Clew. Slide is 2 1/2" long and 2 1/4" (maximum)
high, Pin bearing surface is 1 3/4" above top of track. For Booms with 5/8" Sailtrack. Seaboard.
|
 |
|
|
Heavy-Duty Outhaul Slide for 5/8" Sailtrack: Ken K-1161: Heavy Duty Outhaul Slide Assembly features channel with 1/4" captive Screw Pin for clew attachment. Channel has welded front and back plates with holes for 1/8" wire pennant, wire passes through both ends of channel for maximum support and stability. Slide body is formed Stainless Steel with welded loop and 5/8" ID channel for Clew. Slide is 3" long and 2 3/8" (maximum) high, Pin bearing surface is 1 3/4" above top of track. For Booms with 5/8" Sailtrack.
|
 |
|
|
Bronze Outhaul Slide for 5/8" Sailtrack, Size 0: Mer 409B-0: Cast Bronze Outhaul Slide Assembly features channel with 1/4" Clevis Pin for clew attachment; Bronze Cotter Pin is captive, attached with a lanyard. Channel has 5/8" ID, forward end has carefully formed groove for up to 3/16" line outhaul pennant, providing a 2-1 purchase. Slide is 1 7/8" long and 1 1/2" (maximum) high, Pin bearing surface is 1 1/8" above top of track. For Booms with 5/8" Sailtrack.
|
 |
|
| Bronze Snap-action Outhaul Slide for 5/8" Sailtrack, Size 0: Mer 411B-0: | ||
|
Cast Bronze Snap-action Outhaul Slide features hinged side with spring loaded
Pin for clew attachment;
unit requires no tools, has no loose parts and is easily closed with 2 fingers. Channel has 5/8" ID,
forward end
has carefully formed groove for up to 3/16" line outhaul pennant, providing a 2-1 purchase. Slide is
1 7/8" long
and 1 1/2" (maximum) high, Pin bearing surface is 7/8" above top of track. For Booms with 5/8"
Sailtrack.
These items are newly-found original Merriman 1950's production of a design that goes back to 1925,
suitable for the most meticulous of renovations. Limited Availability.
|
||
|
Bronze Outhaul Slide for 5/8" Sailtrack, Size 1: Mer 409B-1: Cast Bronze Outhaul Slide Assembly features channel with 1/4" Clevis Pin for clew attachment; Bronze Cotter Pin is captive, attached with a lanyard. Channel has 5/8" ID, forward end has carefully formed groove for up to 3/16" line outhaul pennant, providing a 2-1 purchase. Slide is 2 3/4" long and 1 11/16" (maximum) high, Pin bearing surface is 1 1/8" above top of track. For Booms with 5/8" Sailtrack.
|
 |
|
|
|
||
| Outhaul Slides for 7/8" Sailtrack | ||
|
Outhaul Slide for 7/8" Sailtrack: RL-477X: Simple Outhaul/Traveller Slide features 1/4" welded loop with 5/8" ID for clew shackle and attachment of outhaul pennant. Formed Stainless Steel Slide is 1 3/4" long. For Booms with 7/8" Sailtrack.
|
 |
|
|
Outhaul Slide w/ SS Sheave for 7/8" Sailtrack: RL-462-SX: Outhaul Slide Assembly with Stainless Steel Sheave features channel with 1/4" captive Key Pin for clew attachment, and 1 1/16" OD x 7/32" thick Sheave for a 2 part purchase using wire up to 3/32", or line up to 1/8". Slide body is formed Stainless Steel with 5/8" ID welded channel for Clew. Slide is 2 5/8" long and 1 5/8" (maximum) high, Pin bearing surface is 1 1/8" above top of track. For Booms with 7/8" Sailtrack.
|
||
|
|
||
|
Outhaul Cars for Nicro-Fico & Kenyon 3/4" I-Beam Traveller Track |
||
|
Outhaul Car for NF & Kenyon 3/4" I-Beam Track: NF 1213S: This Heavy-duty 4-wheel outhaul car features captive SS ball bearing wheels and control sheave for 1/8" wire pennant for 2-1 or 3-1 external outhaul purchase. SS channel allows for 3 clew positions and Outhaul Pennant becket (3-1) with 1/4" pins and has 5/8" inside clearance for clew rings. Car is 2" long x 1 1/2" wide x 3 3/8" high (maximum), and has an ultimate tensile strength of 2000 lbs. For Track and other Components compatible with this Car, See Nicro-Fico NF-1159 Traveller Systems, and Kenyon 3/4" Traveller Systems.
|
 |
|
|
Outhaul Car for NF & Kenyon 3/4" I-Beam Track: NF 1213: As NF 1213S, above, but with delrin wheels for less demanding duty. This 4-wheel outhaul car features Delrin wheels and control sheave for 1/8" wire pennant for 2-1 or 3-1 external outhaul purchase. SS channel allows for 3 clew positions and Outhaul Pennant becket (3-1) with 1/4" pins and has 5/8" inside clearance for clew rings. Car is 2" long x 1 1/2" wide x 3 3/8" high (maximum), and has a working load of 800 lbs. For Track and other Components compatible with this Car, See Nicro-Fico NF-1159 Traveller Systems, and Kenyon 3/4" Traveller Systems.
|
||
|
|
Delrin Wheels for NF 1213 Outhaul Car: NF 1213WP: Replacement Set of Delrin Wheels as used on NF 1213, above. Wheels measure 11/16" OD x 3/16" ID x 3/16" wide. Set Includes 4 wheels.
|
|
|
|
||
| Outhaul Cars for NF 1100 Recirculating Ball Track | ||
|
Outhaul Car for NF 1100 RCB Track: NF 1184: Outhaul Car designed for use on Nicro-Fico NF 1100 (15/16" wide) Recirculating Ball Traveller Track. Extruded Aluminum Car with plastic end caps rides on Torlon Ball Bearings to provide high strength and low friction at a minimum weight. SS channel allows for 3 Clew positions and 2 Outhaul Pennant positions with 1/4" pins and has 5/8" inside clearance for clew rings. Car is (maximum) 2 3/4" (70mm) long x 2 3/8" (60mm) wide x 2 3/8" (60mm) high (from track surface), and has a safe working load of 1200 lbs.. Outhaul Car uses thirty-six (36) 6.4mm Torlon ball bearings. Suitable for use on most boats up to 30'. For Track and other NF 1100 Components, See Nicro-Fico NF-1100 Traveller Systems.
|
|
|
|
|
||
|
Outhaul Cars for Z-Spar Recirculating Ball Track
Booms used with Furling Masts sometimes use upgraded Outhaul Systems with
special
Recirculating Ball (RCB) Track and Ball-bearing or Slide Rod Outhaul Cars.
This special track is notable in that it is Clear Anodized and has no holes, as it is attached
to the Boom by
sliding it into the Boom track. Ball-bearing Cars are shipped on a piece of Car Loader
track,
and must not be removed from Boom track without Car loader, as ball loading is difficult.
Cars come in a variety of configurations, for replacements not listed below, contact us with
full details. |
||
|
Simple Outhaul Car for Z-Spar RCB Track: Z-95-88SDR: Outhaul Car designed for use with Furling Masts using Z-Spar Z-733 25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting 8mm eye for dead end of sail and Outhaul line. Car rides on Torlon slide rods (not Ball Bearings), making it easy to install. Car is 3 1/2" (88mm) long x 2 3/8" (61mm) wide. R6.4x3
|
 |
|
|
Short Outhaul Car w/ Eye for Z-Spar RCB Track: Z-95-85MT: Ball bearing Outhaul Car designed for use with Furling Masts using Z-Spar Z-733 25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting Sheave Carriage (Z-600A), and a large 8mm eye for dead end of sail Outhaul line. New-style Extruded Aluminum Car has fully machined races, requiring no end caps. Car rides on Torlon Ball Bearings to provide high strength and low friction at a minimum weight. Car body is 85mm (3 3/8") long x 61mm (2 3/8") wide x 22mm (7/8") high (from track surface). Outhaul Car uses forty-eight (48) 6.4mm Torlon ball bearings.
|
|
|
|
|
Ball Bearing Set for Z-95-85M Outhaul Car: Z-BP6M-T48: Replacement ball bearing pack for Z-95-85MT Outhaul Car contains forty-eight (48) 6.4 mm Torlon ball bearings.
|
|
|
|
5" Car Loader for Z-Spar RCB Track: Z-733-CL5: Short piece of Z-Spar Z-733 RCB Track is modified for Outhaul Car transport and Ball loading. This item is shipped (in various lengths) with all Z-Spar Ball-bearing Outhaul Cars, used to transfer the Car to the Boom Track. Z-Spar Z-733 RCB Track is 5" long with one end stopped.
|
|
|
Medium Outhaul Car for Z-Spar RCB Track: Z-95-145C: Ball bearing Outhaul Car designed for use with Furling Masts using Z-Spar Z-733 25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting Sheave Carriage (Z-600A), for sail outhaul line. Extruded Aluminum Car has removable end caps, for easy ball replacement. Car rides on Ball Bearings to provide high strength and low friction at a minimum weight. Car is 145mm (5 3/4") long x 61mm (2 3/8") wide. Outhaul Car uses eighty-six (86) Delrin ball bearings.
|
|
|
|
|
Ball Bearing Set for Z-95-145C Outhaul Car: Z-BP6M-D86: Replacement ball bearing pack for Z-95-145C Outhaul Car contains eighty-six (86) 6.4 mm Delrin ball bearings.
|
|
|
|
7" Car Loader for Z-Spar RCB Track: Z-733-CL7: Short piece of Z-Spar Z-733 RCB Track is modified for Outhaul Car transport and Ball loading. This item is shipped (in various lengths) with all Z-Spar Ball-bearing Outhaul Cars, used to transfer the Car to the Boom Track. Z-Spar Z-733 RCB Track is 7" long with one end stopped.
|
|
| Medium Outhaul Car w/ pivoting Shackle for Z-Spar RCB Track: Z-95-147DR: | ||
|
Outhaul Car designed for use with Furling Masts using Z-Spar Z-733
25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting Sheave Carriage
(Z-600A), and an 8mm pivoting shackle for dead end of Outhaul
line. Car rides on Torlon slide rods (not Ball Bearings), making it easy to install.
Car is 5 3/4" (147mm) long x 2 3/8" (61mm) wide. R6.4x5.25
|
 |
|
| Medium Outhaul Car w/ pivoting Shackle for Z-Spar RCB Track: Z-95-155MT: | ||
|
Outhaul Car designed for use with Furling Masts using Z-Spar Z-733
25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting Sheave Carriage
(Z-600A), and an 8mm pivoting shackle for dead end of sail Outhaul line.
New-style Car rides on Torlon Slide Rods to provide high strength and
low friction at a minimum weight. Car is 156mm (6 1/8") long x 61mm
(>2 3/8") wide. Old-style Car uses ninety-two (92) Torlon ball bearings.
|
|
|
| Ball Bearing Set for Z-95-155MT Outhaul Car: Z-BP6M-T92: | ||
|
|
Replacement ball bearing pack for discontinued Z-95-155MTX Outhaul Car contains
ninety-two (92) 6.4 mm Torlon ball bearings.
|
|
|
|
7" Car Loader for Z-Spar RCB Track: Z-733-CL7: Short piece of Z-Spar Z-733 RCB Track is modified for Outhaul Car transport and Ball loading. This item is shipped (in various lengths) with all Z-Spar Ball-bearing Outhaul Cars, used to transfer the Car to the Boom Track. Z-Spar Z-733 RCB Track is 7" long with one end stopped.
|
|
|
Long Outhaul Car for Z-Spar RCB Track: Z-95-225C: Ball bearing Outhaul Car designed for use with Furling Masts using Z-Spar Z-733 25mm wide Recirculating Ball Track on the Boom. Car incorporates a pivoting Sheave Carriage (Z-600A), for sail outhaul line. Extruded Aluminum Car has removable end caps, for easy ball replacement. Car rides on Torlon Ball Bearings to provide high strength and low friction at a minimum weight. Car is 225mm (8 7/8") long x 61mm (2 3/8") wide. Outhaul Car uses one hundred thirty-eight (138) Delrin ball bearings.
|
|
|
|
|
Ball Bearing Set for Z-95-225C Outhaul Car: Z-BP6M-D138: Replacement ball bearing pack for Z-95-225C Outhaul Car contains one hundred thirty-eight (138) Delrin ball bearings.
|
|
|
|
10" Car Loader for Z-Spar RCB Track: Z-733-CL10: Short piece of Z-Spar Z-733 RCB Track is modified for Outhaul Car transport and Ball loading. This item is shipped (in various lengths) with all Z-Spar Ball-bearing Outhaul Cars, used to transfer the Car to the Boom Track. Z-Spar Z-733 RCB Track is 10" long with one end stopped.
|
|
|
Track End Stop for Z-Spar RCB Track: Z-733-01: Track End Stop designed for use with Z-Spar Z-733 25mm wide Recirculating Ball Track. Gray plastic Track End Stop is 2 1/8" (55mm) long x 1 3/8" (35mm) wide.
|
||
|
|
||
| Z-Spar Outhaul Car Parts | ||
|
|
Sheave Carriage Ass'y for Furling Outhaul Car: Z-600A: Cast Aluminum Sheave Carriage Assembly as used in a variety of Z-Spar Outhaul Cars, rides on 8mm Pin and includes 35mm (1 3/8") OD plastic Sheave, Z-1617.
|
 |
|
|
End Cap for Z-Spar Outhaul Car - 2 fasteners: Z-EC25-2: Replacement End Cap for Z-Spar Cars for 25mm RCB Track. Cast Aluminum End Cap is 62mm (2 7/16") wide x 21mm (13/16") high x 13mm (1/2") thick, and attaches to Car with (2) 4mm screws. 43
|
 |
|
|
End Cap for Z-Spar Outhaul Car - 1 fastener: Z-EC25-1: Tall Replacement End Cap for Z-Spar Cars for 25mm RCB Track. End Cap is 62mm (2 7/16") wide x 41mm (1 5/8") high x 13mm (1/2") thick, and attaches to Car with (1) 5mm thru-bolt. 4044 |
 |