Sparcraft Booms for Furling Masts

Sparcraft Furling Masts commonly use Standard FB Booms & Components, including standard Outhaul Cars, but sometimes use upgraded Outhaul Systems with special Ball-Bearing Tracks, listed below. Sparcraft Booms FB-550 and smaller, use Sparcraft Size 1 Outhaul Track and Components. Booms FB-810 and larger, use Sparcraft Size 2 Outhaul Track and Components. Facnor Outhaul Cars, used on Boom Track supplied with Add-on (external) Mainfurl Systems for conventional Masts are also listed here. All other Boom fittings are detailed on the appropriate Boom pages, See Sparcraft Booms & Components, and Isomat Booms & Components. See also Sparcraft Furling Masts.

Sparcraft Size 1 Outhaul Track & Components

*Sparcraft Size 1 Outhaul Track x 9' 10": FBE-1T-3M:* Sparcraft Size 1 Recirculating Ball Outhaul Track is (maximum) 23.5mm (.925") wide and features an auxiliary (8mm) Boltrope groove as well as an integral "T" on the lower side, compatible with Boom Sections from FB-60 to FB-550, NB-32 and NB-40. Track height (without "T") is 14.5mm. Standard 3 Meter (9'10") length is suitable for most applications, but Track is available in longer lengths, please inquire.
*Sparcraft Outhaul Track End Stop: FBE-ESA:* Heavy-duty End Stop is used with Sparcraft Size 1 and Size 2 Outhaul Tracks. Cast Aluminum End Stop is 2" wide x 2" (maximum) long (50 x 50mm) x 3/4" (19mm) thick, and attaches to Boom with (2) 1/4" FH on 13/16" (20mm) centers.
*Sparcraft Size 1 Outhaul Car: FBE-1CL:* Sparcraft/ Lewmar Size 1 Ball-Bearing Outhaul Car is used on Size 1 Outhaul Track for Booms used with Furling Masts. Car features Torlon Ball-Bearings, Becket shackle for line dead end, and wide 60mm OD plastic sheave for Outhaul line. Car is 6 1/8" (156mm) long x (maximum) 1 7/8" (72mm) wide. Cars are shipped on a short piece of loading Track to simplify installation.
	*Ball Bearing Set for Size 1 Outhaul Car: FBE-1C-T90:* Replacement ball bearing pack for Sparcraft/ Lewmar Size 1 Outhaul Car contains ninety (90) 6mm Torlon ball bearings.
	*Car Loader for Size 1 Outhaul Car: FBE-1C-CL10:* Short piece of Sparcraft/ Facnor Size 1 Track is used for Outhaul Car transport and to simplify Ball loading. This item is shipped with all Size 1 Outhaul Cars, used to transfer the Car to the Boom Track. Unit is 8" long with one end stopped.

Sparcraft Size 2 Outhaul Track & Components

*Sparcraft Size 2 Outhaul Track x 14'9": FBE-2T-4.5M:* Sparcraft Size 2 Recirculating Ball Outhaul Track is 30mm (1 1/8") wide and features an auxiliary (10mm) Boltrope groove as well as an integral "T" on the lower side, compatible with Boom Sections from FB-810 to FB-3400. Track height (without "T") is 18mm. Standard 4.5 Meter (14'9") length is suitable for most applications, but Track is available in longer lengths, please inquire.
*Sparcraft Outhaul Track End Stop: FBE-ESA:* Heavy-duty End Stop is used with Sparcraft Size 1 and Size 2 Outhaul Tracks. Cast Aluminum End Stop is 2" wide x 2" (maximum) long (50 x 50mm) x 3/4" (19mm) thick, and attaches to Boom with (2) 1/4" FH on 13/16" (20mm) centers.
*Sparcraft/ Facnor Size 2 Outhaul Car: FBE-2CF:* Sparcraft/ Facnor Size 2 Outhaul Car is used on Size 2 Outhaul Track for Booms used with Furling Masts. Car features Torlon Ball-Bearings, Becket shackle for line dead end, and wide 55mm OD Aluminum sheave for Outhaul line. Solid machined Aluminum Car is 7 7/8" (200mm) long x 3 3/16" (81mm) wide. Cars are shipped on a short piece of loading Track to simplify installation.
	*Ball Bearing Set for Size 2 Outhaul Car: FBE-2C-T100:* Replacement ball bearing pack for Sparcraft/ Facnor or Lewmar Size 2 Outhaul Car contains one hundred (100) 8mm Torlon ball bearings.
	*Car Loader for Size 2 Outhaul Car: FBE-2C-CL10:* Short piece of Sparcraft/ Facnor Size 2 Track is used for Outhaul Car transport and to simplify Ball loading. This item is shipped with all Size 2 Outhaul Cars, used to transfer the Car to the Boom Track. Unit is 10" long with one end stopped.
*Sparcraft/ Lewmar Size 2 Outhaul Car: FBE-2CL:* Specially modified Lewmar Car is used on Sparcraft Size 2 Outhaul Track for Booms used with Furling Masts. Car features Torlon Ball-Bearings, Becket shackle for line dead end, and wide 70mm OD Composite sheave for Outhaul line. Extruded Aluminum Car is 8 1/4" (210mm) long x 3 5/8" (92mm) wide and features removable Aluminum ends to simplify bearing replacement in the field. Cars are shipped on a special plastic loading Track which features easily removable stops and Ball-loading recesses to simplify future Ball replacement.

Facnor KB-10 Outhaul Track & Components

*Facnor KB-10 Outhaul Track: Fac KB10-__:* Facnor KB-10 Recirculating Ball Outhaul Track is (maximum) 25.5mm (1") wide x 20mm (13/16") high and is flat on the bottom. Track is attached to Boom using various insert slides, depending on the type of groove in the Boom. Sold with external Mainfurl Systems designed for conventional Masts, Track is also available separately, specify length and configuration of the Boom groove to receive appropriate insert slides and fasteners.
*Facnor KB-10 Outhaul Car, Short: Fac KB10-C1:* Facnor Outhaul Car for KB-10 Recirculating Ball Track. Car features Delrin Ball-Bearings, Becket for line dead end, and Roller Bearing sheave for Outhaul line. Extruded Aluminum Car is 148mm (5 7/8") long x 60mm (2 3/8") wide and features removable Aluminum ends to simplify bearing replacement in the field. Cars are shipped on a special piece of loading Track for easy installation.
	*Facnor KB-10 Outhaul Car Sheave, 55mm: SM55DRB20-8T:* Replacement Sheave for Facnor *KB10-C1* Outhaul Car. Heavy-duty molded Delrin Roller Bearing Sheave has interior SS Bushing with an ID threaded for 8mm screws. White Sheave is 55mm (2 3/16") OD x 20mm wide. Note: This Sheave is also used on Facnor Clew Blocks and Outhaul assemblies supplied with the Facnor Add-on Mainfurl Systems.
*Facnor KB-10 Outhaul Car, Long: Fac KB10-C2:* Facnor Outhaul Car for KB-10 Recirculating Ball Track. Car features Delrin Ball-Bearings, Becket for line dead end, and Roller Bearing sheave for Outhaul line. Extruded Aluminum Car is 175mm (6 7/8") long x 60mm (2 3/8") wide and features removable Aluminum ends to simplify bearing replacement in the field. Cars are shipped on a special piece of loading Track for easy installation.
	*Facnor KB-10 Outhaul Car Sheave, 70mm: SM70DRB20-8T:* Replacement Sheave for Facnor *KB10-C2* Outhaul Car. Heavy-duty molded Delrin Roller Bearing Sheave has interior SS Bushing with an ID threaded for 8mm screws. White Sheave is 70mm (2 3/4") OD x 20mm wide. Note: This Sheave is also used on Facnor Clew Blocks and Outhaul assemblies supplied with the Facnor Add-on Mainfurl Systems.

Your cart

Spars, Rigging, and Hardware for Sailboats