 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Sheave Axle Pins |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Sheave Axle Pins |
|
|
|
|
| Sheave Axle Pins Sheaves ride on Axle Pins, Axle Pins in most Masts, Booms and many Exit Blocks are removable for ease of Sheave replacement. SS Sheave Axle Pins with Tab are listed below, but Clevis Pins and Rigging Pins are also commonly used as Sheave Axles. In addition, many Masts and Booms have proprietary fittings that use specialized Sheave Axles. These are listed by manufacturer under the particular fitting they are used in, See Spars. |
|
|
|
|
| Kenyon Sheave Axle Pins with
Tab Kenyon SS Sheave Axle Pins with Tabs are used in masts with welded-in mastheads and sheave boxes. Pins are welded to SS Tabs, which are screwed to the mast and allow for easy removal. Most Sheave Axle Pins have a thin stem where they are welded to the tab, which allows the tab to be bent to fit the mast contour where it attaches to mast. Listed below are standard sizes, but others are available. |
|
|
|
|
| 1/4" Sheave Axle Pins Kenyon 1/4" Sheave Axle Pins are welded to a round tab which attaches to mast with (2) #10 (3/16") screws. Round tab is 1 1/8" diameter with 2 holes on 3/4" centers. |
|
|
1/4" Sheave Axle Pin - 1 1/2" long: K-1297-1X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Pin is 1/4" diameter, unit is (maximum) 1 1/2" long.
|
 |
|
1/4" Sheave Axle Pin - 1 3/4" long: K-1297-3X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 1 3/4" long. As used on J/24 for main halyard sheave, and on E-22 for spinnaker halyard sheave. d
|
|
|
1/4" Sheave Axle Pin - 2" long: K-1297-5: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2" long. As used on some J/24's for jib halyard sheave.
|
|
|
1/4" Sheave Axle Pin - 2 1/4" long: K-1297-7X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 1/4" long. As used on some J/24's for jib halyard sheave.
|
|
|
1/4" Sheave Axle Pin - 2 1/2" long: K-1297-4: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 1/2" long. As used on E-22, and some J/24's for spinnaker halyard sheave.
|
|
|
1/4" Sheave Axle Pin - 2 7/8" long: K-1297-6X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 7/8" long. As used on J/24's with old-style double spinnaker halyard box.
|
|
|
|
|
| 5/16" Sheave Axle Pins | |
| 5/16" Sheave Axle Pin - 2 3/4" long: K-10680-9S: SS Sheave Axle Pin is welded to a thin tab which attaches to mast with (1) #10 (3/16") screw. Tab is 1 3/8" overall x 7/16" wide. Axle Pin is 5/16" diameter, unit is (maximum) 2 3/4" long.
|
|
|
|
|
| 3/8" Sheave Axle
Pins Kenyon 3/8" Sheave Axle Pins bendable are welded to a Teardrop shaped tab, which attaches to mast with (1) #10 (3/16") screw. Teardrop Tab is 2 1/8" overall x 1 1/4" wide. Screw hole is 1 1/4" from axle center. |
|
|
3/8" Sheave Axle Pin - 2 1/2" long: K-10680-1: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 2 1/2" long.
|
|
|
3/8" Sheave Axle Pin - 3" long: K-10680: SS Sheave Axle Pin has a thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 3" long.
|
|
|
3/8" Sheave Axle Pin - 3 1/2" long: K-10680-2: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 3 1/2" long.
|
|
|
|
|
| 7/16" Sheave Axle Pins | |
|
7/16" Sheave Axle Pin - 2 1/4" long: K-11659: SS Sheave Axle Pin has thin stem welded to Teardrop shaped tab which attaches to mast with (1) #10 (3/16") screw. Teardrop tab is 2 1/8" overall x 1 1/4" wide. Axle Pin is 7/16" diameter, unit is (maximum) 2 1/4" long. As used on some Soverel 33's, and others.
|
|
|
|
|
| 12mm Sheave Axle Pins | |
12mm Sheave Axle Pin w/ Tab - 3" long: K-11129-12mm:
|
 |
|
|
|
| 1/2" Sheave Axle Pins Most Kenyon 1/2" Sheave Axle Pins are welded to a Teardrop shaped tab, which attaches to mast with (1) #10 (3/16") screw. Teardrop Tab is 2 1/8" overall x 1 1/4" wide, screw hole is 1 1/4" from axle center. |
|
|
1/2" Mast Base Sheave Axle Pin - 2 1/8" long: K-11669: SS Mast Base Sheave Axle Pin is welded at 90 degrees to tab which attaches to mast exit block and other flat surfaces with (1) #10 screw. Axle Pin is 1/2" diameter, unit is (maximum) 2 1/8" long, Oval tab measures 1" x 1 1/2". Used in Masts with welded-in deck-level exit blocks. As used on Hunter 34 and others.
|
|
|
1/2" Sheave Axle Pin - 3" long: K-11129-1: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3" long. P208-97
|
|
|
1/2" Sheave Axle Pin - 3 1/2" long: K-11129-2: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3 1/2" long.
|
|
|
1/2" Sheave Axle Pin - 3 3/4" long: K-11129-3: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3 3/4" long.
|
|
|
1/2" Sheave Axle Pin - 4 1/2" long: K-11129-4: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 4 1/2" long.
|
|
|
1/2" Sheave Axle Pin - 5 3/4" long: K-11129-5: SS Sheave Axle Pin has thin bendable stem welded to Teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 5 3/4" long. |
|
