The newer (and more common) Typhoon Weekender models are
Deck-stepped, using the SP-661 cast Tabernacle. All Mast
Assemblies and Sections listed below refer to these versions. If you have a Typhoon
Weekender that is Keel-stepped, or has a different Mast Section, please contact us with
details.
|
| Description |
Part # |
Price |
| Typhoon Weekender Standard Mast Assembly Complete. |
SP-CDTyWMA |
$ Call |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Ass'y includes Spreaders, and all attached hardware,
with leaders for halyards. Standard rig includes pin for SP-661
Tabernacle.
|
|
|
| Typhoon Weekender Mast Assembly w/ Spinnaker Option. |
SP-CDTyWMAS |
$ Call |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Ass'y includes everything in Standard Mast Ass'y, as well as all
Mast-mounted Spinnaker hardware, including Blocks and Car.
|
|
|
| -- Typhoon Weekender
Standard Mast Section Only - milled.
|
SP-CDTyWMM |
$ 779.00 |
| - Clear Anodized Mast Section - CD-2 x
23' 9 1/2", is milled for gate, exit blocks (2), & SP-661
Tabernacle. Upper exit block (Harken ball-bearing for Jib halyard) is included.
|
|
|
| Typhoon Weekender Mast Ass'y w/ Internal Spinnaker Option. |
SP-CDTyWMASI |
$ Call |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Includes everything in Standard Mast Ass'y w/
Spinnaker Option, but w/ provisions for Internal Spinnaker halyard.
|
|
|
| Typhoon Weekender
Mast Section Only - for Internal Spinnaker. |
SP-CDTyWMMS |
$ 879.00 |
| - Clear Anodized Mast Section - CD-2 x
23' 9 1/2", is milled for gate, exit blocks (3), exit plate (port side) and SP-661
Tabernacle. Upper exit blocks (Harken ball-bearing for Jib & Spinnaker
halyard), and exit plate are included.
|
|
|
| Typhoon Weekender Mast Section, tube only - CD-2 x 23' 9 1/2" |
SP-CDTyWMT |
$ 469.00 |
|
| Masthead Ass'y, Cast Anodized Alu. - Complete, w/ Delrin Sheave |
SP-040P |
$ 219.00 |
| Masthead Clevis Pin only, 1/4"
9803
|
CP 4-34 |
$ 5.00 |
| Main Halyard Sheave - Plastic, 3/8" ID And |
PP-S5.3D8-6 |
$ 22.00 |
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
SP-9523 |
$ 3.00 |
| OR
|
|
|
| Main Halyard Sheave - Aluminum w/ integral bushing, 3/8" ID And
|
PP-S5.3A8-B6 |
$ 38.00 |
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
K-9523 |
$ 3.00 |
|
| Eyestrap for Spinnaker Halyard Block, 4-hole |
SP-216 |
$ 9.00 |
| Spinnaker Halyard Swivel Block, SS |
SP-019BL |
$ 32.00 |
| Forestay Tang |
SP-201 |
$ 9.00 |
| Jib halyard Exit Block - Old style |
SP-225 |
$ .00 |
| Jib halyard Exit Block - New style |
HAR 088 |
$ 13.00 |
| Shroud Tang for 1/4" Pin (Uppers & Lowers) |
SP-209 |
$ 8.00 |
| Sail Slide Stop |
SP-11000 |
$ 12.00 |
| Spar Cleat - 4" |
D-10324 |
$ 22.00 |
| Downhaul Cleat - 3" (slides in track) |
SP-023 |
$ 24.00 |
| Halyard Exit Block - Double sheave, at mast base |
SP-911 |
$ 199.00 |
| Tabernacle Mast Step Casting |
SP-661 |
$ 269.00 |
| Tabernacle Pin Assembly |
SP-662 |
$ 19.00 |
| - Optional Spinnaker Parts |
Part # |
Price |
| Eyestrap for Spinnaker Halyard Block, 4-hole |
SP-216 |
$ 9.00 |
| Spinnaker Halyard Swivel Block, SS |
SP-019BL |
$ 32.00 |
| Eyestrap for Pole Lift Block, 2-hole |
SP-215 |
$ 3.00 |
| Spinnaker Pole Lift Swivel Block, SS |
SP-019BL |
$ 32.00 |
| Spinnaker Pole Track - 3/4" Aluminum T-Track x 2' @6'6"
|
Mer 7000B-2 |
$ 25.00 |
| End Stop for 3/4" T-Track, Black (2 required) |
Mer 7000BS |
$ 4.00 |
| Spinnaker Pole Car* - 3/4" T-Track or Flat Track |
Sch 73-26X |
$ 89.00 |
| - Complete Kit includes all parts listed above and
includes all fasteners.
|
SP-CDTyWSHK |
$ 179.00 |
| Spinnaker Pole - 1 1/4" OD x 6' 2 1/2" w/ SS Piston Ends. |
SP-CDTyWSP |
$ 169.00 |
|
| *Other sizes of Spinnaker Track have been used on older
Typhoons, Cars for them are listed below.
|
| Spinnaker Pole Car - 7/8" T-Track or Flat Track |
Sch 73-27X |
$ 89.00 |
| Spinnaker Pole Car - 1" T-Track or Flat Track |
Sch 73-28X |
$ 59.00 |
