 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Spartan Outboard Motor Mount |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Spartan Outboard Motor Mount |
|
|
|
|
| Removable Bronze Outboard Motor Mount | ||||
|
Spartan’s Outboard Motor Mount is made of cast bronze and
heavy hardwood to provide a rugged, dependable method of mounting an outboard up to 6 HP on
the stern of sailboats with an afterdeck of eight inches (8") or more. The Assembly consists of
two parts; the Deck Mounting Plate and the Motor mount Bracket. The deck Mounting Plate
is permanently fastened through the after deck, and the Motor Bracket is positioned only
when the outboard is required. This keeps the engine out of the way when it isn't needed,
and doesn't spoil the beauty of the boat. The Bracket is simply placed in the deck
Mounting Plate at a straight up angle, and then lowered 90 degrees to the proper
horizontal position. There are no fasteners required to lock the Bracket into the mount,
and the Mounting Plate alone will not snag lines. Commonly used on Cape Dory Typhoon
and similar yachts. |
||||
|
||||
|
Bronze Outboard Bracket & Deck Plate Set: SP 99-31A: Cast Bronze Removable Outboard Motor Mount Assembly for use with outboards up to 6 HP. 2 piece Set includes Outboard Bracket and Deck Plate. Deck Plate SP 99-31DP, mounts on stern of sailboats with an afterdeck of 8 inches or more. Outboard Bracket, SP 99-31B, keys vertically into Deck Plate and has hardwood platform (12" x 5 1/2" x 1 3/4") for attaching outboard motor. As used on Cape Dory Typhoon. Shipping weight is 18 lbs..
|
|
|||
| Bronze Outboard Bracket only: SP 99-31B: Cast Bronze Outboard Motor Mount Bracket for use with Bronze Deck Plate, SP 99-31DP. Outboard Bracket keys into Deck Plate and can not be removed without the bracket being raised to a vertical position. Bracket is (maximum) 17" long (9" from Deck Plate center to bend, 7" from bend to wood) with varnished hardwood platform (12" x 5 1/2" x 1 3/4") for attaching outboard motor. Unit is suitable for use with outboards up to 6 HP.
|
|
|||
| Bronze Deck Plate for Outboard Bracket: SP 99-31DP: Cast Bronze Deck Plate for Removable Outboard Motor Mount Bracket, SP 99-31B. Deck Plate Base is 6 5/8" long x 2" wide x (maximum) 1 5/8" high and bolts through the deck with (4) 1/4" FH bolts. |
|
|||
