IYE 1 11/16" Traveller Track

IYE 1 11/16" Traveller Track
*IYE 1 11/16" Traveller Track: IYE 42L-01-__ft.:* IYE 1 11/16" Traveller Track is an anodized Aluminum X-shaped Track that measures 1 11/16" (42mm) across the top and bottom, and is 1 3/4" (45mm) high. Track is drilled for 5/16" (8mm) FH screws on 6" (152mm) centers. Track weighs 1.34 lbs./ft. and is available in various lengths.

IYE 1 11/16" Traveller Cars
IYE 1 11/16" Traveller Cars run on turned Delrin Ball-Bearing wheel assemblies that have a 1 1/2" (38mm) Outside Diameter. Cars are available in 4-wheel versions (6-wheel Cars are no longer available) with a variety of Control Sheave and Cam Cleat configurations. IYE Ball-Bearing wheel assemblies are not reparable or replaceable.
*4-wheel Traveller Car: IYE 42L-4-11:* 4-Wheel Traveller Car for IYE 1 11/16" Traveller Track is constructed of aluminum alloy and features Delrin Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block, and tapped holes to allow for attachment of various Control Sheave and Cam Cleat Assemblies. Car is 5 5/8" (143mm) long x 4" (102mm) wide.
*4-wheel Traveller Car w/ 2 Control Sheaves: IYE 42L-4-12:* 4-Wheel Traveller Car for IYE 1 11/16" Traveller Track is constructed of aluminum alloy and features Delrin Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and 2 Ball-Bearing Sheaves for Control Lines with SS Cover Plate on one side. Car is 5 5/8" (143mm) long x 4" (102mm) wide. Provides a 2-1 control purchase, or add Becket Set, IYE 42L-37BK, for a 3-1 control purchase.
*4-wheel Traveller Car w/ 2 Control Sheaves & Cam Cleats: IYE 42L-4-13:*
As IYE 42L-4-12, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 2-1 control purchase, or add Becket Set, IYE 42L-37BK, for a 3-1 control purchase.
*4-wheel Traveller Car w/ 4 Control Sheaves: IYE 42L-4-16:* 4-Wheel Traveller Car for IYE 1 11/16" Traveller Track is constructed of aluminum alloy and features Delrin Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and 2 Ball-Bearing Sheaves for Control Lines with SS Cover Plate on both sides. Car is 5 5/8" (143mm) long x 4" (102mm) wide. Provides a 4-1 control purchase.
*4-wheel Traveller Car w/ 4 Control Sheaves & Cam Cleats: IYE 42L-4-19:*
As IYE 42L-4-16, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 4-1 control purchase.

IYE 1 11/16" Traveller Car Parts
*Control Sheave Ass'y for Traveller Car: IYE 42L-36:* Control Sheave Assembly for 4-wheel (and most 6-wheel) Traveller Cars for IYE 1 11/16" Traveller Track. Assembly consists of (2) 1 1/2" OD Delrin Ball-Bearing Sheave Assemblies and a SS Cover Plate with (2) mounting screws. Fasteners are on 3 3/8" Centers. Cover Plate is 4 7/8" long x 1 7/16" wide.
*Cam Cleat Ass'y Set for Traveller Car: IYE 42L-38CK:*
Cam Cleat for Control Line is mounted on SS Plate to fit IYE 1 11/16" Traveller Cars. Each Cam Cleat Assembly mounts beneath Control Sheave Assembly and mounts on Car with two additional screws (included). Set includes 2 Cam Cleat and SS Plate Assemblies (Right & Left) with Servo #33 Cam Cleats.
*Becket Set w/ screws for Traveller Car: IYE 42L-37BK:* Becket Set includes (2) Beckets with screws for dead-ending Control Lines on Traveller Car. Screws (8mm) into existing threaded holes in Traveller Car wheel axles, allowing attachment of up to 3/8" Control Lines, increasing purchase ratio of any Car by one. On Cars with 2 Control Sheaves, Becket mounts on opposite side from Control Sheaves. On Cars with 4 Control Sheaves, Becket mounts on top of Control Sheaves, using existing screws.

IYE 1 11/16" Traveller End Stops
*Aluminum Track End ‘Crash Stop’: IYE 42L-22:* Heavy-duty Aluminum Track End Stop attaches to Track with (1) 8mm (5/16") and (1) 6mm (1/4") screw (included), on 1 3/4" hole centers. Anodized, extruded Aluminum Track End is 3 1/8" long x 4" wide and features rubber bumpers to cushion car impact.

IYE 1 11/16" Traveller Control Ends
*Double Sheave, Track-mount Control End: IYE 42L-25:* For 3-1 purchase systems w/ Car-mounted Cam Cleats. Extruded Aluminum Control End attaches to Track with (1) 8mm (5/16") and (1) 6mm (1/4") screw (included), on 1 3/4" hole centers. Anodized Aluminum Track End features rubber bumpers to cushion car impact. Two (2) Ball-Bearing sheaves allow for control lines up to 7/16" diameter. Unit is 3 1/8" long x 4" wide. Mounting requires drilling and tapping (2) holes in Track, or assembly can be thru-bolted using longer screws.
*Double Sheave, Track-mount Control End w/ Becket: IYE 42L-25B:*
For 4-1 purchase systems, Control End is as IYE 42L-25, above, but with the addition of a removable Becket.
*Double Sheave Control End w/ Cam Cleat - Left: IYE 42L-26L:* *Double Sheave Control End w/ Cam Cleat - Right: IYE 42L-26R:* For 3-1 purchase systems. Extruded Aluminum Control End attaches to Track with (1) 8mm (5/16") and (1) 6mm (1/4") screw (included), on 1 3/4" hole centers. Anodized Aluminum Track End features rubber bumpers to cushion car impact. Cam Cleat plate assembly mounts beneath the Two (2) Ball-Bearing sheaves which allow for control lines up to 7/16" diameter. Unit is 3 1/8" long x 4" wide. Mounting requires drilling and tapping (2) holes in Track, or assembly can be thru-bolted using longer screws.
	*Cam Cleat Ass'y Set for Control End: IYE 42L-28K:* Cam Cleat Plate Assembly as used on IYE 42L-26 Control Ends, above. Set includes 2 Cam Cleat Assemblies (Right & Left) with Servo #33 Cam Cleats.
*Double Sheave Control End w/ Cam Cleat & Becket - Left: IYE 42L-26LB:* *Double Sheave Control End w/ Cam Cleat & Becket - Right: IYE 42L-26RB:*
For 4-1 purchase systems, Control Ends are as IYE 42L-26, above, but with the addition of a removable Becket.

Your cart

Spars, Rigging, and Hardware for Sailboats

The IYE 1 11/16" Traveller System is designed around a heavy anodized X-shaped Track that measures 1 11/16" (42mm) across the top. Cars run on machined dual-race Delrin Ball-Bearing wheel assemblies that have a 1 1/2" (38mm) Outside Diameter. Cars are available in 4-wheel versions (6-wheel Cars are no longer available) with a variety of Control Sheave and Cam Cleat configurations. Track-mounted Control Ends are available with or without Cam Cleats for purchases of up to 4-1.
Traveller Track Traveller Cars Traveller Car Parts Traveller End Stops Traveller Control Ends