Amiot 32mm RCB Traveller System


Amiot 32mm RCB Traveller Track
Amiot 32mm Standard RCB Track: AMI 32BT-__ft.: Amiot 32mm RCB Traveller Track is an anodized Aluminum Track that measures 32.8mm (1 1/4") across the top and 35mm (1 3/8") across the bottom, and is 20mm (25/32") high. Track is drilled for 8mm (5/16") FH screws on 100mm (3 7/8") centers. Amiot 32mm RCB Track is available in a variety of lengths up to 3 meters (9' 10" feet).
Amiot 32mm High-Profile RCB Bridge Track: AMI 32BTH-__ft.: Amiot 32mm High-Profile RCB Traveller Bridge Track is a high profile anodized Aluminum Track that measures 32mm (1 1/4") across the top, 40mm across the bottom, and is 57mm (2 1/4") high. As this Bridge Track is designed primarily to span an unsupported area, no fastener holes are predrilled. Amiot 32mm RCB Bridge Track is available in a variety of lengths up to 2.5 meters (8' 3" feet), and can be curved and drilled to customer's specifications on special order.

Amiot 32mm RCB Traveller Cars & Parts
Amiot 32mm RCB Traveller Cars utilize 8mm Delrin or heavy-duty Torlon balls in dual recirculating races, and come in 3 lengths with safe working loads of up to 4400 lbs. (2000kg). All Cars feature a single sheave and becket on each end and aluminum Toggle(s) that pivot in-line with the Track. Toggles feature a threaded 8mm (5/16") SS Pin. All Cars are shipped on Car Loaders. Cars should be moved back onto a Car Loader when removing the Car from the Track. Please Note: These Cars have been marketed by Goiot, and sometimes feature the Goiot imprint.
Old-Style Amiot 32mm RCB Cars
Short Traveller Car w/ Single Toggle: AMI 32B-10D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and a single pivoting Aluminum Toggle with 8mm screw pin for attachment to mainsheet block. Car has beckets and 2 control sheaves for up to 5/16" (8mm) line, providing up to a 3-1 control purchase. Short Car is 7 5/16" (185mm) long with a maximum width of 3 1/16" (78mm).
	*Replacement Delrin Ball Bearing Pack for Ami 32B Short Cars: AMI 32B-BP-D90:*
	Replacement ball bearing pack for AMI 32B-10 Short Cars contains ninety (90) 8mm Delrin ball bearings.
	*Replacement Torlon Ball Bearing Pack for Ami 32B Short Cars: AMI 32B-BP-T90:*
	Replacement ball bearing pack for AMI 32B-10 Short Cars contains ninety (90) 8mm Torlon ball bearings.
	Replacement SS Toggle for Amiot 32mm Cars: AMI 32B-10SST:
	Cast Stainless Steel Toggle only, for replacement of Aluminum Toggle standard on Amiot 32mm Old-style RCB Cars. Replacement SS Toggle has the same Jaw configuration as the original, but is much stronger and slightly thinner, Includes 8mm Clevis Pin and spacer washers.
	Replacement SS Cross-Pin for Amiot 32mm Cars: AMI 32B-10P:
	Stainless Steel knurled Axle pin is 10mm (3/8") diameter x 60mm (2 3/8") long. Used as axle for Toggle on Amiot 32mm Old-style RCB Cars.
	Replacement End Cap for Amiot 32mm Cars: AMI 32B-10EC:
	Cast Aluminum End Cap only, as included with Amiot 32mm Old-style RCB Cars.

Long Traveller Car w/ Single Toggle: AMI 32B-11D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and a single pivoting Aluminum Toggle with 8mm screw pin for attachment to mainsheet block. Car has beckets and 2 control sheaves for up to 5/16" (8mm) line, providing up to a 3-1 control purchase. Long Car is 10 1/2" (265mm) long with a maximum width of 3 1/16" (78mm).
Traveller Car w/ Double Toggles: AMI 32B-12D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and Two pivoting Aluminum Toggles with 8mm screw pin for attachment to mainsheet blocks. Car has beckets and 2 control sheaves for up to 5/16" (8mm) line, providing up to a 3-1 control purchase. Double Toggle Car is 10 3/8" (260mm) long with a maximum width of 3 1/16" (78mm).
	*Replacement Delrin Ball Bearing Pack for Ami 32B Long Cars: AMI 32B-BP-D130:*
	Replacement ball bearing pack for AMI 32B-11 and AMI 32B-12 Long Cars contains one hundred and thirty (130) 8mm Delrin ball bearings.
	*Replacement Torlon Ball Bearing Pack for Ami 32B Long Cars: AMI 32B-BP-T130:*
	Replacement ball bearing pack for AMI 32B-11 and AMI 32B-12 Long Cars contains one hundred and thirty (130) 8mm Torlon ball bearings.
Traveller Car w/ Triple Toggles: AMI 32B-13D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and Three pivoting Aluminum Toggles with 8mm screw pin for attachment to mainsheet blocks. Car has beckets and 2 control sheaves for up to 5/16" (8mm) line, providing up to a 3-1 control purchase. Triple Toggle Car is 12" (300mm) long with a maximum width of 3 1/16" (78mm).
	*Replacement Delrin Ball Bearing Pack for Ami 32B Extra Long Cars: AMI 32B-BP-D150:*
	Replacement ball bearing pack for AMI 32B-13 Extra Long Cars contains one hundred and fifty (150) 8mm Delrin ball bearings.
	*Replacement Torlon Ball Bearing Pack for Ami 32B Extra Long Cars: AMI 32B-BP-T150:*
	Replacement ball bearing pack for AMI 32B-13 Extra Long Cars contains one hundred and fifty (150) 8mm Torlon ball bearings.

New-Style Amiot 32mm RCB Cars
Traveller Car w/ Single Toggle: AMI 32B-14D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and a single pivoting Toggle for attachment to mainsheet block. Car has 4 control sheaves for up to 3/8" (10mm) line, providing up to a 4-1 control purchase. Single Toggle Car is 7 7/8" (200mm) long with a maximum width of 3 1/4" (81mm). 93247
Traveller Car w/ 2 Toggles: AMI 32B-15D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and Two (2) pivoting Toggles for attachment to mainsheet blocks. Car has 4 control sheaves for up to 3/8" (10mm) line, providing up to a 4-1 control purchase. Double Toggle Car is 10 1/2" (267mm) long with a maximum width of 3 1/4" (81mm). 93248
Traveller Car w/ 2 Toggles & Becket Shackle: AMI 32B-16D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and Two (2) pivoting Toggles for attachment to mainsheet blocks, and a central shackle for use as a Becket for the Mainsheet. Car has 4 control sheaves for up to 3/8" (10mm) line, providing up to a 4-1 control purchase. Double Toggle Car w/ Becket Shackle is 11 5/8" (295mm) long with a maximum width of 3 1/4" (81mm). 93250
Long Traveller Car w/ 3 Toggles: AMI 32B-17D: Traveller Car for Amiot 32mm RCB Track has Delrin Ball Bearings and Three (3) pivoting Toggles for attachment to mainsheet blocks. Car has 4 control sheaves for up to 3/8" (10mm) line, providing up to a 4-1 control purchase. Triple Toggle Car is 13 1/8" (334mm) long with a maximum width of 3 1/4" (81mm). 93249

Amiot 32mm RCB Traveller Control Ends Control Ends for Amiot 32mm RCB Traveller Track are anodized Cast Aluminum with 2 Sheaves and are available with or without Cam Cleats.
Double Sheave Control End for Standard Track w/ Cam Cleat - Left: AMI 32B-18L: Double Sheave Control End for Standard Track w/ Cam Cleat - Right: AMI 32B-18R:
Control End for Amiot 32mm Standard RCB Low-Profile Traveller Track has 2 vertically stacked sheaves for Control Lines up to 5/16" (8mm) and includes Cam Cleats. Control End completely covers Track end and features rubber bumper to cushion Car impact. Assembly locks in to end of Track and fastens to Track with 8mm FH machine screw. Anodized cast aluminum Control End is (maximum) 2 3/8" (60mm) high x 2 3/4" (70mm) wide x 4 7/16" (113mm) long without rubber stop, projects 4 1/4" onto Track, and extends 3/16" beyond the end of the Track. SM35R10-8
Double Sheave Control End for Standard Track - Left: AMI 32B-19L: Double Sheave Control End for Standard Track - Right: AMI 32B-19R:
Control Ends for Amiot 32mm Standard RCB Traveller Track are as AMI 32B-18L, and -18R above, but without Cam Cleats.
Double Sheave Control End for High-Profile Track w/ Cam Cleat - Left: AMI 32B-20HL: Double Sheave Control End for High-Profile Track w/ Cam Cleat - Right: AMI 32B-20HR:
Control Ends for Amiot 32mm High-Profile RCB Traveller Track are as AMI 32B-18L, and -18R above, but with a longer lower lip to completely cover the end of the higher Track. Control End is (maximum) 3 3/4" (95mm) high x 2 3/4" (70mm) wide x 4 7/16" (113mm) long without rubber stop.
Double Sheave Control End for High-Profile Track - Left: AMI 32B-21HL: Double Sheave Control End for High-Profile Track - Right: AMI 32B-21HR:
Control Ends for Amiot 32mm High-Profile RCB Traveller Track are as AMI 32B-20L, and -20R above, but without Cam Cleats.
	Replacement Bumper for Amiot 32mm Control Ends: AMI 3218B:
	Rubber Bumper only, as included with Amiot 32mm Control Ends. Molded Rubber Bumper is (maximum) 1 1/2" (38mm) wide x 1 1/4" (32mm) long, and extends 1/4" beyond the Control End.

New-Style Amiot 32mm RCB Traveller Control Ends
New-Style Control Ends for Amiot 32mm RCB Traveller Track are anodized Cast Aluminum and are available with or without Cam Cleats, and with a vertical sheave configuration to lead control lines to the deck, for use with dodgers and spray hoods.
Double Sheave Control End for High-Profile Track w/ Cam Cleat - Left: AMI 32B-22HL: Double Sheave Control End for High-Profile Track w/ Cam Cleat - Right: AMI 32B-22HR:
Control End for Amiot 32mm RCB High-Profile Bridge Track has 2 stacked sheaves for Control Lines up to 3/8" (10mm) and includes a Becket and Cam Cleats. Control End completely covers Track end and features rubber bumper to cushion Car impact. Assembly locks into end of Track and fastens to Track with 8mm RH machine screw. Anodized aluminum Control End is (maximum) 4" (100mm) high x 3" (78mm) wide x 5 3/8" (137mm) long without rubber stop, projects 4 7/8" (124mm) onto Track, and extends 9/16" (14mm) beyond the end of the Track. 93245/93246		/1
Double Sheave Control End for High-Profile Track - Left: AMI 32B-23HL: Double Sheave Control End for High-Profile Track - Right: AMI 32B-23HR:
Control Ends for Amiot 32mm RCB High-Profile Bridge Track are as AMI-32B-18L, and -18R above, but without Cam Cleats. 93243/93244
Three Sheave Control End for High-Profile Track - Left: AMI 32B-24HL: Three Sheave Control End for High-Profile Track - Right: AMI 32B-24HR:
Control End for Amiot 32mm RCB High-Profile Bridge Track has 2 stacked sheaves and a vertically mounted sheave to lead Control Lines down to the deck. Control End is suitable for up to 3/8" (10mm) lines. Control End completely covers Track end and features rubber bumper to cushion Car impact. Assembly locks into end of Track and fastens to Track with 8mm RH machine screw. Anodized aluminum Control End is (maximum) 4" (100mm) high x 3" (78mm) wide x 5 3/8" (137mm) long without rubber stop, projects 4 7/8" (124mm) onto Track, and extends 9/16" (14mm) beyond the end of the Track. 93241/93242		6/
	Replacement Bumper for Amiot 32mm Control Ends: AMI 3218B:
	Rubber Bumper only, as included with Amiot 32mm Control Ends. Molded Rubber Bumper is (maximum) 1 1/2" (38mm) wide x 1 1/4" (32mm) long, and extends 1/4" beyond the Control End.

Your cart

Spars, Rigging, and Hardware for Sailboats

Amiot 32mm Recirculating Ball (RCB) Traveller Systems use an anodized Track that measures 32.8mm (1 1/4") across the top. Cars are high strength extruded Aluminum with cast ends, and ride on Delrin or heavy-duty Torlon Ball Bearings. Like all Recirculating Ball Travellers they have the disadvantage of loosing their balls unless special precautions are taken when removing them from the track.
Traveller Track Traveller Cars & Parts Traveller Control Ends