Vang Toggles

Vang Toggles pivot on a Vertical Pin or Bolt attached to a Mast Bracket, and have a Horizontal hole for attachment of the Vang. Some Toggles for Hard Vangs have additional holes to attach Blocks for a Vang purchase. Hole size should be the same as the Vang Pin size. Vang Toggles listed below fit standard Imperial size Vertical Pins. For Vang Toggles to fit Metric Pins, See: Isomat/ Sparcraft Vang Brackets & Toggles, and Z-Spar Vang Toggles. For Vang Attachments for Booms, See: Boom Bails & Vang Attachments.

Vang Toggles for 1/4" Vertical Pin Vang Toggles for a 1/4" Vertical Pin are used in a variety of semi-custom applications.
*SS Vang Toggle - 1 1/2" high for 14mm Pin: K-11788S:* Used with some Kenyon (and other) Gooseneck Brackets with a 1/4" Vertical Pin, this SS toggle has a 14mm (9/16") hole for Vang attachment and (2) 8mm (5/16") holes for Vang Tackle. Welded Tube is 1 1/2" long, Tab is 5mm (3/16") thick x (maximum) 4 3/16" tall. As used with Sparcraft Pneuvang and others.

Vang Toggles for 3/8" Vertical Pin Vang Toggles for a 3/8" Vertical Pin are used in a variety of production applications.
*SS Vang Toggle for Soft Vang - 1 1/2" high: K-10963:* Used with Kenyon (and other) Gooseneck Brackets with a 3/8" Vertical Pin, this SS toggle has large 3/4" horizontal hole for attachment of Soft (block & tackle) Vangs. Welded Tube is 1 1/2" long, Tab is 5mm (3/16") thick.
*SS Vang Toggle - 1 1/2" high for 14mm Pin: K-10963-2:* Used with Kenyon (and other) Gooseneck Brackets with a 3/8" Vertical Pin, this SS toggle has 14mm (9/16") hole for Vang attachment and 8mm (5/16") hole for Vang Tackle. Welded Tube with Bronze bushed hole is 1 1/2" long, Tab is 5mm (3/16") thick x (maximum) 2 3/8" tall. As used with Sparcraft Pneuvang and others.
*SS Vang Toggle - 1 1/2" high for 14mm Pin: K-11788:* Used with Kenyon (and other) Gooseneck Brackets with a 3/8" Vertical Pin, this SS toggle has a 14mm (9/16") hole for Vang attachment and (3) 8mm (5/16") holes for Vang Tackle. Welded Tube is 1 1/2" long, Tab is 5mm (3/16") thick x (maximum) 4 3/4" tall. As used with Sparcraft Pneuvang and others.

*Aluminum Vang Toggle - 2 3/16" high for 3/8" Pin: :* Aluminum Vang Toggle fits Brackets with a 3/8" Vertical Pin, and has a 3/8" hole for Vang attachment. Unit is 2 3/16" high x (maximum) 3" long, Tab is 3/8" wide at horizontal Pin hole. As used with Quikvang and others.	#
*Aluminum Vang Toggle - 2 1/4" high for 3/8" Pin: SPC M1009:* Aluminum Vang Toggle fits Brackets with a 3/8" Vertical Pin, and has a SS Bushed 3/8" hole for Vang attachment. Unit is 2 1/4" high x (maximum) 2 3/4" long, Tab is 3/8" wide at horizontal Pin hole. spc

Vang Toggles for 1/2" Vertical Pin Vang Toggles for a 1/2" Vertical Pin are used in a variety of production and custom applications.
*Aluminum Vang Toggle - 2 1/2" high for 1/2" Pin: SPC M1010:* Aluminum Vang Toggle fits Brackets with a 1/2" Vertical Pin, and has a 1/2" hole for Vang attachment. Unit is 2 1/2" high x (maximum) 3 1/8" long, Tab is 1/2" wide at horizontal Pin hole. spc
*SS Vang Toggle - 3 1/8" high for 1/2" Pin: :* SS Vang Toggle fits Brackets with a 1/2" Vertical Pin, and has a 1/2" hole for Vang attachment and (2) 3/8" holes for Vang Tackle. SS tube is 3 1/8" long, Tab is 3/8" thick x (maximum) 4 3/4" tall. As used with Forespar Yachtrod and others.	#

*Aluminum Vang Toggle - 3" high for 5/8" Pin: :* Aluminum Vang Toggle fits Brackets with a 1/2" Vertical Pin, and has a 5/8" hole for Vang attachment and (2) 5/16" holes for Vang Tackle. Unit is 3" high x (maximum) 5" long, Tab is 5/8" wide at horizontal Pin hole. As used with Forespar Yachtrod and others.	#
*Aluminum Vang Toggle - 3 1/4" high for 5/8" Pin: :* Aluminum Vang Toggle fits Brackets with a 1/2" Vertical Pin, and has a 5/8" hole for Vang attachment. Unit is 3 1/4" high x (maximum) 4 1/8" long, Tab is 5/8" wide at horizontal Pin hole. As used with Quikvang and others.	#

Vang Toggles for 5/8" Vertical Pin Vang Toggles for a 5/8" Vertical Pin are used in a variety of production and custom applications.
*SS Vang Toggle - 2 3/4" high for 5/8" Pin: NG3-17:* Heavy-duty SS Vang Toggle fits Brackets with a 5/8" Vertical Pin, including the NG3-11 Vang Bracket. SS tube is 2 3/4" (70mm) long, welded SS Tab is 8mm (5/16") thick with welded reinforcement bushing (5/8" wide) and projects 2 3/4" (70mm) out from 30mm diameter tube. Tab has 5/8" (16mm) hole for attachment of Vang. Also recommended for use with Soft (block and tackle) Vangs, as the large hole will accommodate any shackle.
*Aluminum Vang Toggle - 3" high for 5/8" Pin: K-11695:* Aluminum Vang Toggle fits Brackets with a 5/8" Vertical Pin, and has a 5/8" hole for Vang attachment. Unit is 3" high x (maximum) 4" long, Tab is 1/2" wide at horizontal Pin hole. As used on J/40.
*Aluminum Vang Toggle - 3 3/4" high for 5/8" Pin: :* Aluminum Vang Toggle fits Brackets with a 5/8" Vertical Pin, and has a 5/8" hole for Vang attachment. Unit is 3 3/4" high x (maximum) 4 1/2" long, Tab is 5/8" wide at horizontal Pin hole. As used with Quikvang and others.	#

Your cart

Spars, Rigging, and Hardware for Sailboats