Single Clevis Tangs

Single Clevis Tangs Clevis Tangs come with a Clevis Pin and are used to attach rigging which uses Eye fittings. See also, Tangs Main Page. Pivoting Tangs - mount on a single bolt, with or without a Flange Bushing. Fixed Tangs - attach to the Mast with multiple fasteners, allowing no fore and aft movement.

Pivoting Single Clevis Tangs Pivoting Single Clevis Tangs are commonly used in Lower and Intermediate Shroud applications and are especially suitable for Running Backstays and other applications where the load angle can vary. They mount on a single Bolt of the size indicated, or with a Flange Bushing and a smaller Bolt. Larger Pivoting Tangs will, in many applications, require use of Flange Bushings and/or Tang Bearing Plates.

Clevis Tangs for 1/4" Bolt
*Short Clevis Tang w/ 3/16" Pin: K-616A:* Lightweight SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 2" long x 5/8" wide x .062" with (1) 1/4" mounting hole and includes (1) 3/16" Clevis Pin. Tang Assembly mounts on a 1/4" bolt, hole centers are 1 5/16" apart. Used in a variety of applications.
*Short Clevis Tang w/ 1/4" Pin: K-84-1104-4R:* Short Clevis Tang Assembly for use with Shrouds up to 5/32" diameter using standard Eyes. Welded Tang is 2" long x 5/8" wide x .062" with (1) 1/4" mounting hole and includes (1) 1/4" Clevis Pin. Tang Assembly mounts on a 1/4" bolt; hole centers are 1 3/8" apart.

Clevis Tangs for 3/8" Bolt
*Clevis Tang w/ 1/4" Pin: K-84-1106-4:* Clevis Tang Assembly for use with Shrouds up to 3/16" diameter using standard Eyes. Tang is 3 3/4" long x 1" wide x .086" with (1) 3/8" mounting hole and includes (1) 1/4" Clevis Pin. Tang Assembly mounts on a 3/8" bolt; hole centers are 2 3/4" apart.
*Short Tapered Clevis Tang w/ 5/16" Pin: K-84-1106-5R:* Short Tapered Clevis Tang Assembly for use with Shrouds up to 3/16" diameter using standard Eyes. Welded Tang is 2 1/2" long x (maximum) 1" wide x .062" with (1) 3/8" mounting hole and includes (1) 5/16" Clevis Pin. Tang Assembly mounts on a 3/8" bolt; hole centers are 1 1/2" apart.

Clevis Tangs for 1/2" Bolt
Short Clevis Tang w/ 7/16" Pin: RR 84-1108-7S: SS Clevis Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Short Contoured, welded Tang is 4" long x 1 1/8" wide x .120" with (1) 1/2" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 2 3/8" apart; Tang mounts on a 1/2" bolt.
Clevis Tang w/ 7/16" Pin: RR 84-1108-7C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Contoured, welded Tang is 5" long x (maximum) 1 1/2" wide x .120" with (1) 1/2" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 1/2" bolt.
Clevis Tang w/ 1/2" Pin: RR 84-1108-8C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured, welded Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 1/2" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 1/2" bolt.

Clevis Tangs for 5/8" Bolt
Clevis Tang w/ 1/2" Pin: RR 84-1110-8C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured, welded Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 5/8" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 5/8" bolt.
Clevis Tang w/ 5/8" Pin: RR 84-1110-10C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Contoured, welded Tang is 6 1/2" long x (maximum) 1 3/4" wide x .158" with (1) 5/8" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 4 1/2" apart; Tang mounts on a 5/8" bolt.

Clevis Tangs for 3/4" Bolt
Clevis Tang w/ 1/2" Pin: RR 84-1112-8C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured, welded Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 3/4" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern. DO
Clevis Tang w/ 5/8" Pin: RR 84-1112-10C: Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Contoured, welded Tang is 6 1/2" long x (maximum) 1 3/4" wide x .158" with (1) 3/4" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 4 1/2" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.
Heavy Clevis Tang w/ 5/8" Pin: K-10784A: Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Tang is 7 1/2" long x (maximum) 2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 5 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.
Clevis Tang w/ 3/4" Pin: K-11157A: Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 7 1/2" long x (maximum) 2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 3/4" Clevis Pin. Hole centers are 5 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern. These tangs should be used with SS Bearing Plates or other mast wall reinforcement in all standard applications.

Kenyon 'Dog-Bone' Pivoting Tangs
‘Dog-Bone’ Clevis Tang w/ 1/4" Pin: K-1490: Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 5/32" diameter with standard Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .062" with (1) 1/2" mounting hole and includes (1) 1/4" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushings (K-9630) and a 5/16" bolt for applications where weight is a concern.
‘Dog-Bone’ Clevis Tang w/ 5/16" Pin: K-1491: Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .062" with (1) 1/2" mounting hole and includes (1) 5/16" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushings (K-9630) and a 5/16" bolt for applications where weight is a concern.

‘Dog-Bone’ Clevis Tang w/ 3/8" Pin: K-1492: Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x .090" with (1) 11/16" mounting hole and includes (1) 3/8" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.
‘Dog-Bone’ Clevis Tang w/ 7/16" Pin: K-1493: Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds that are 7/32" diameter with standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with 11/16" Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.
‘Dog-Bone’ Clevis Tang w/ 1/2" Pin: K-1494: Lightweight SS ‘Dog-Bone’ Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.


Fixed Single Clevis Tangs Fixed Single Clevis Tangs are especially suitable for use in Upper Shroud applications as the multiple fasteners allow no fore and aft movement, they are also suited for other applications where the tang should not be allowed to pivot.
*Fixed Clevis Tang w/ 3/16" Pin: K-616AFR:* SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 3" long x 1/2" wide x .062" with (2) 3/16" mounting holes and includes (1) 3/16" Clevis Pin. Tang Assembly mounts with (2) 3/16" (10) fasteners, mounting hole centers are 1 3/8" apart. Used in a variety of applications.

Fixed Clevis Tang w/ 7/16" Pin: RR 84-1208-7A: SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Tang is 7" long x 1 5/16" wide x .105" with (2) 1/2" mounting holes and includes (1) 7/16" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2" centers; Pin center is 3 5/8" from lower bolt.

Fixed Clevis Tang w/ 1/2" Pin: RR 84-1208-8A: SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 7" long x 1 5/16" wide x .105" with (2) 1/2" mounting holes and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2" centers; Pin center is 3 5/8" from lower bolt.
Fixed Clevis Tang w/ 1/2" Pin: RR 84-1208-8LAV: SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 8" long x 1 1/2" wide x .109" with (2) 1/2" mounting holes and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2 1/4" centers; Pin center is 4 1/4" from lower bolt.
Fixed Clevis Tang w/ 1/2" Pin: SP-206: SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 6 7/8" long x 1 1/4" wide x .120" with (1) 1/2", and (1) 3/8" mounting hole and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (1) 1/2" bolt and (1) 3/8" bolt on 1 7/16" centers; Pin center is 4" from lower bolt.
Fixed Clevis Tang w/ 1/2" Pin: RR 84-1508-8M: SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Original S&S Design welded Contoured Tang is 6 3/4" long x 1 3/8" (maximum) wide x .120" with (4) 1/4" (upper) and (1) 1/2" (lower) mounting holes. Pin center is 3 3/8" from lower mounting hole. Mounts with (4) 1/4" screws and (1) 1/2" bolt, and includes (1) 1/2" Clevis Pin.

Fixed Clevis Tang w/ 5/8" Pin: RR 84-1608-10: SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Original S&S Design Tapered Tang is 9" long x 3/4" wide (at top) x 1 5/8" wide (at bottom) x .120" with (5) 1/4" (upper) and (1) 1/2" (lower) mounting holes. Pin center is 3 3/4" from lower mounting hole. Mounts with (5) 1/4" screws and (1) 1/2" bolt, and includes (1) 5/8" Clevis Pin.
Fixed Clevis Tang w/ 5/8" Pin: RR 84-1510-10M: SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Original S&S Design welded Contoured Tang is 9" long x 1 3/4" (maximum) wide x .120" with (4) 1/4" (upper) and (1) 5/8" (lower) mounting holes. Pin center is 3 3/4" from lower mounting hole. Mounts with (4) 1/4" screws and (1) 5/8" bolt, and includes (1) 5/8" Clevis Pin.

Fixed Clevis Tang w/ 3/4" Pin: K-74112: Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 13 3/4" long x 2 1/2" wide x 3/16" (.186") with (8) 5/16" (upper) and (1) 7/8" (lower) mounting holes. Pin center is 6 1/4" from lower mounting hole. Mounts with (8) 5/16" FH screws and (1) 7/8" bolt, and includes (1) 3/4" Clevis Pin.

Your cart

Spars, Rigging, and Hardware for Sailboats