Double Shroud Clevis Tangs

Double Shroud Clevis Tangs Used on rigs with Double Lower Shrouds, these Tangs are suitable in a variety of other applications and come with Clevis Pins. Pivoting Tangs mount on a single bolt, while Fixed Tangs attach to the Mast with multiple fasteners. Units that mount with a single bolt will, in many applications, require use of Flange Bushings and/or Tang Bearing Plates. See also, Tangs Main Page.

Pivoting Double Clevis Tangs
*Tapered Double Clevis Tang w/ 1/4" Pins - 5/16" mount: RR 84-2105-4D:* Tapered SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 5/32" diameter using standard Eyes. Triangular Double Tang is 2 3/4" long x 1 9/16" wide (at bottom) x .60" with (1) 5/16" mounting hole, and includes (2) 1/4" Clevis Pins. Pin centers are 2" from mounting hole and are 1 3/8" (horizontal) apart. Mounts with (1) 5/16" bolt. SC

*Tapered Double Clevis Tang w/ 5/16" Pins - 3/8" mount: RR 84-2106-5D:* Tapered SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 3/16" diameter using standard Eyes. Triangular Double Tang is 4 1/4" long x 1" wide (at top) x 1 3/4" wide (at bottom) x .120" with (1) 3/8" mounting hole, and includes (2) 5/16" Clevis Pins. Pin centers are 3" from mounting hole and are 1 1/16" (horizontal) apart. Mounts with (1) 3/8" bolt. SP

*Tapered Double Clevis Tang w/ 7/16" Pins - 1/2" mount: K-84-2108-7D:* Tapered SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 7/32" diameter using standard Marine Eyes. Triangular Double Tang is 3 7/8" long x 1" wide (at top) x 2 1/2" wide (at bottom) x .120" with (1) 1/2" mounting hole, and includes (2) 7/16" Clevis Pins. Pin centers are 2 3/4" from mounting hole and are 1 3/8" (horizontal) apart. Mounts with (1) 1/2" bolt.
Double Clevis Tang w/ 7/16" Pins - 1/2" mount: RR 84-2108-7A: Tapered SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 1/2" diameter using standard Marine Eyes. Triangular Double Tang is 4 3/4" long x 1 1/2" wide (at top) x 2 7/8" wide (at bottom) x .120" with (1) 1/2" mounting hole, and includes (2) 7/16" Clevis Pins. Pin centers are 3 1/4" from mounting hole and are 1 1/4" (horizontal) apart. Mounts with (1) 1/2" bolt.
Double Lower Shroud Clevis Tang Set w/ 7/16" Pins - 5/8" mount: RC 84-2110-7S: ♥
SS Double Clevis Tang Set was designed for use with (4) Lower Shrouds up to 7/32" diameter using standard Marine Eyes. Set includes (2) Double Tangs and (4) 7/16" Clevis Pins. Double Tang is 9" long x 2 1/8" wide x .120" with (1) 5/8" mounting hole. Pin centers are 5" (upper) and 6 3/4" (lower) from mounting hole and are 2" (diagonally) apart. Mounts with (1) 5/8" bolt. RC as used by Columbia.

Double Clevis Tang w/ 1/2" Pins - 1/2" mount: RR 84-2108-8A: Tapered SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Welded Triangular Double Tang is 4 3/4" long x 1 1/2" wide (at top) x 2 7/8" wide (at bottom) x .120" with (1) 1/2" mounting hole, and includes (2) 1/2" Clevis Pins. Pin centers are 3 1/4" from mounting hole and are 1 1/4" (horizontal) apart. Mounts with (1) 1/2" bolt.
Double Lower Shroud Clevis Tang Set w/ 1/2" Pins - 5/8" mount: RC 84-2110-8S: ♥
SS Double Clevis Tang Set was designed for use with (4) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Set includes (2) Double Tangs and (4) 1/2" Clevis Pins. Double Tang is 9" long x 2 1/8" wide x .120" with (1) 5/8" mounting hole. Pin centers are 5" (upper) and 6 3/4" (lower) from mounting hole and are 2" (diagonally) apart. Mounts with (1) 5/8" bolt. RC as used by Columbia.
Double Clevis Tang w/ 1/2" Pins - 3/4" mount: K-10498A: SS Double Clevis Tang was designed for use with (2) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Double Tang is 6" long x 3" wide x .120" with (1) 3/4" mounting hole, and includes (2) 1/2" Clevis Pins. Pin centers are 3 3/4" from mounting hole and are 1 5/16" (horizontal) apart. Mounts with (1) 3/4" bolt, or with Flange Bushing (K-10455) and a 1/2" bolt for applications where weight is a concern. was D/K-40544A
Double Lower Shroud Clevis Tang Set w/ 1/2" Pins - 3/4" mount: SP-753K: SS Double Lower Shroud Tang Set was designed for use with (4) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Set includes (2) Double Tangs and (4) 1/2" Clevis Pins. Double Tang is 6" long x 2 1/4" wide x .120" with (1) 3/4" mounting hole. Pin centers are 3 1/8" (upper) and 4 1/4" (lower) from mounting hole and are 1 1/2" (diagonally) apart. Mounts with (1) 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern. Used on a variety of Cape Dory Yachts, and others. Commonly used with Tapered Bearing Plates and Flange Bushings, allowing for attachment to the mast with (2) 1/2" bolts. See *SP-753BPA,* below.
	Backing Plate Ass'y w/ Flange Bushings: SP-753BPA: Recommended for standard applications, this Assembly allows for attachment of SP-753K Tang Set with (2) 1/2" bolts. Includes (2) Tapered Bearing Plates (K-11216-S1), and (2) 3/4" OD Flange Bushings (*K-10455S). Mounting requires (1) 1/2" and (1) 3/4" hole in each side of mast. Used with SP-765* and SP-766 Spreader Bases, and SP-753K, Lower Shroud Tangs, and in a variety of other applications.
	Tapered SS Bearing Plate w/ 3/4" hole: K-11216-S1: Tapered SS Bearing Plate has (1) 1/2" hole and (1) 3/4" hole for use with bolts of those sizes, or with SS Flange Bushings and smaller bolts. Tapered Plate is 3 1/2" long x 1" wide (at top) x 2" wide (at bottom) x 3/32" (.098") thick, with (2) holes on 1 3/4" centers, and is contoured for use with most Mast Sections. Used with *SP-765* and *SP-766* Spreader Bases and SP-753K Lower Shroud Tangs.
	Flange Bushing – 3/4" OD x 1/2" ID: K-10455S: SS Flange Bushing is 3/4" OD x 1/2" ID. Used with a 1/2" bolt it replaces a 3/4" bolt in Shroud Tang applications to achieve significant weight reduction without any attendant reduction in bearing surface. 3/4" OD Flange Bushing is 3/4" long, Flange Head is 7/8" diameter x 1/8" thick. XXP
Double Lower Shroud Clevis Tang Set w/ 1/2" Pins: Sch 84-27K: SS Double Lower Shroud Tang Set was designed for use with (4) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Set includes (2) Tangs, (2) Tapered Bearing Plates, (2) 3/4" OD Flange Bushings, and (4) 1/2" Clevis Pins. Tapered Bearing Plates are 3 1/2" long x 2" wide, with (3) 1/4" (upper) and (1) 3/4" (lower) holes. Double Tang is 7 1/8" long x 2" wide x .120" with (1) 3/4" mounting hole. Pin centers are 4 3/8" (upper) and 5 1/2" (lower) from mounting hole and are 1 3/8" (diagonally) apart. Flange Bushings and Tapered Bearing Plates allow for attachment to the mast with (1) 1/2" bolt and (3) 1/4" screws. Mounting requires (3) 1/4" and (1) 3/4" hole in each side of mast.

Double Clevis Tang w/ 5/8" Pins: K-10779A: Tapered SS Double Clevis Tang Assembly was designed for use with (2) Lower Shrouds up to 3/8" diameter using standard Marine Eyes. Tapered Double Tang is 7 1/2" long x 2" wide (at top) x 4" wide (at bottom) x 3/16" (.186") with (1) 3/4" mounting hole, and includes (2) 5/8" Clevis Pins. Pin centers are 5 3/8" from mounting hole and are 2" (horizontal) apart. Mounts with (1) 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.

Double Clevis Tang w/ 3/4" Pins: K-11158A: Tapered SS Double Clevis Tang Assembly was designed for use with (2) Lower Shrouds up to 7/16" diameter using standard Marine Eyes. Tapered Double Tang is 7 1/2" long x 2" wide (at top) x 4" wide (at bottom) x 3/16" (.186") with (1) 3/4" mounting hole, and includes (2) 3/4" Clevis Pins. Pin centers are 5 3/8" from mounting hole and are 2" (horizontal) apart. Mounts with (1) 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.

Fixed Double Clevis Tangs
Fixed Double Clevis Tang Set w/ 1/2" Pins: RR 84-2712-8AS: SS Double Lower Shroud Tang Assembly Set was designed for use with (4) Lower Shrouds up to 9/32" diameter using standard Marine Eyes. Set includes (2) Tangs, and (4) 1/2" Clevis Pins. Original S&S Design Double Tapered Tangs are 8" long x 1 3/4" wide (at top) x 2 1/2" wide (at bottom) x .120" with (6) 5/16" (upper) and (1) 3/4" (lower) mounting holes. Pin centers are 3 1/4" (upper) and 4" (lower) from lower mounting hole and are 1 3/8" (diagonally) apart. Mounts with (6) 5/16" screws and (1) 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.
Fixed Double Clevis Tang Set w/ 5/8" Pins: RR 84-2712-10AS: SS Double Lower Shroud Tang Assembly Set was designed for use with (4) Lower Shrouds up to 3/8" diameter using standard Marine Eyes. Set includes (2) Tangs, and (4) 5/8" Clevis Pins. Original S&S Design Double Tapered Tangs are 11" long x 2 1/4" wide (at top) x 2 3/4" wide (at bottom) x .120" with (6) 5/16" (upper) and (1) 3/4" (lower) mounting holes. Pin centers are 4 3/4" (upper) and 5 3/4" (lower) from lower mounting hole and are 1 11/16" (diagonally) apart. Mounts with (6) 5/16" screws and (1) 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.
Fixed Double Clevis Tang w/ 3/4" Pins: K-74212A: Heavy SS Double Clevis Tang Assembly was designed for use with (2) Shrouds up to 7/16" diameter using standard Marine Eyes. Double Tang is 14 3/4" long x 4" wide x .120" with (9) 5/16" (upper), (1) 7/8" (center) and (1) 1 1/4" (lower) mounting holes. Pin Hole centers are 5 3/4" (vertical) from lower mounting hole and are 2" (horizontal) apart. Mounts with (9) 5/16" FH screws, (1) 7/8", and (1) 1 1/4" bolt.

Your cart

Spars, Rigging, and Hardware for Sailboats