Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Kenyon Spar Cleats


Spar Cleats

Kenyon Spar Cleats are specifically designed for attachment to Spars, with a narrow base that attaches with 2 screws. All but the smallest have a hole in the base so the line can be run through it and knotted, preventing the line from getting away. Kenyon Spar Cleats have been used by many Spar builders and by many boat builders in non-Spar applications.

See also: other Spar Cleats, and Cleats Main Page.


Spar Cleat - 3 1/4" long, Black: K-1617:
Cast Aluminum Cleat is a low-profile design with a narrow base suitable for use with line up to 5/16" diameter. Black Epoxy coated Cleat is 3 1/4" long, and fastens to spar with (2) 5/32" (#8) FH screws on 7/8" centers. 

 


Spar Cleat - 4" long: Ken D-10324:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with line up to 3/8" diameter. Black Epoxy coated Cleat is 4" long, and fastens to spar with (2) 3/16" (#10) FH screws on 1 3/16" centers. 

 

Spar Cleat - 5" long: Ken D-10325:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with line up to 1/2" diameter. Black Epoxy coated Cleat is 5" long, and fastens to spar with (2) 7/32" (#12) FH screws on 1 1/2" centers. 

 

 

 

Spar Cleat - 6" long Kenyon: D-10326:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with line up to 5/8" diameter. Black Anodized Cleat is 6" long, and fastens to spar with (2) 1/4" FH screws on 1 3/4" centers. sasch7?

 

 
Spar Cleat - 7" long Kenyon: D-10327:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with line up to 5/8" diameter. Black Anodized Cleat is 7" long, and fastens to spar with (2) 5/16" FH screws on 2 1/16" centers.

 


 Downhaul Cleats
Downhaul Cleat Ass'y - 3 1/4" long: K-1108:
Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-1617-1 3 1/4" Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.

 

Downhaul Cleat Ass'y - 4" long: K-1414:
Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-10324 4" Spar Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.

 

~ Back to Cleats Main Page ~

~ Back to Spars Main Page ~

~ Back to Rig-Rite Home Page ~