Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as
details of the Spar Sections and additional parts, are available on the
Spar Section, or
Parts pages. J/30 Masts use the Kenyon 4060 Mast Section.
J/30 Booms use the Kenyon E-Section Boom.
J/30 Spreaders use the Kenyon SP-3
Spreader Section. |
| J/30 Mast &
Components -
Kenyon 4060 Mast Section |
| Description |
Part # |
Price |
| J/30 Mast Assembly - Clear Anodized 05 |
K-FM573A |
$ Call. |
| J/30 Mast Tube Only - Clear Anodized x 47' 3 1/2" |
K-FMT573AW |
$ Call. |
|
- Tube is Tapered with welded Masthead, and sailgate cutout, ready to
transfer hardware.
4g10-6
|
|
|
|
| Mast Head Cap |
K-10696 |
$ 35.00 |
| Main Halyard Sheaves - Aluminum - Masthead has 2 Sheaves |
|
|
| - New Style Sheave - Heavy-duty w/ integral
bushing
|
K-198-7AB4 |
$ 37.00 |
| - Old Style Sheave w/ 3/8" ID (Requires Bushing)
|
K-198-7A |
$ 24.00 |
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
K-9523 |
$ 3.00 |
| Main halyard sheave & Topping lift Clevis Pin (1/4" dia.) |
K-CP4-28 |
$ 7.00 |
| Backstay Clevis Pin (5/16" dia.) |
K-CP5-28 |
$ 9.00 |
| T-Ball Backing Plate Tangs - All Shrouds (7/32", 1/4", 9/32" wire) |
GIB 740-7 |
$ 12.00 |
| T-Ball Retaining Plug - Rubber - All Shrouds |
GIB 742-7 |
$ 12.00 |
| New Style Aluminum 4-sheave Jib Box * |
K-11597-1 |
$ 479.00 |
| Pole lift Exit Block – SS w/ 1 7/8" plastic sheave |
K-11199P-1 |
$ 89.00 |
| Pole lift Exit Block – SS w/ 2" Alum. sheave |
K-11199A-1 |
$ 129.00 |
| Spinnaker Pole Mast Eye |
K-11077 |
$ 109.00 |
| Slide Conversion Kit for 4" Gate |
K-11656K |
$ 99.00 |
| Slide Conversion Kit for 6" Gate |
K-11754K |
$ 129.00 |
| - Closes Mainsail
Gate for use w/ slugs
|
|
|
| - Measure gate cutout before
ordering
|
|
|
| SS Roller Sailfeeder |
K-11087 |
$ 129.00 |
| Gooseneck Bracket SS - for 1 1/2" Toggle |
K-10650 |
$ 189.00 |
| Vang Tab (SS) for K-10650 Bracket (optional) |
K-10963 |
$ 79.00 |
| Vang Bracket SS - w/ Fixed Tab |
K-10654 |
$ 109.00 |
| Halyard Lead Swivel Block |
K-10865 |
$ 289.00 |
| Mast Boot - White |
K-10858BLP |
$ 99.00 |
| Mast Step Casting |
K-10664 |
$ 239.00 |
| J/30
Spreaders & Components -
Kenyon SP-3 Spreader Section |
| Description |
Part # |
Price |
| Port Spreader Assembly - Clear Anodized |
K-FS573AP |
$ 289.00 |
| Starboard Spreader Assembly - Clear Anodized |
K-FS573AS |
$ 289.00 |
| Port Spreader Assembly - Painted White |
K-FS573WP |
$ 359.00 |
| Starboard Spreader Assembly - Painted White |
K-FS573WS |
$ 359.00 |
|
| Spreader Tube only - Clear Anodized (P or S) |
K-FST573A (P or S) |
$ 199.00 |
| Spreader Tube only - Painted White (P or S)
T=38"max 15d
|
K-FST573W(P or S) |
$ 269.00 |
| Spreader Tip – New Style (Cast Aluminum) |
K-10263 |
$ 89.00 |
| Spreader Tip � Old Style (Urethane) Use K-10263 |
K-10778 |
$ N/A |
| Port Spreader Bracket SS |
K-10652P |
$ 239.00 |
| Starboard Spreader Bracket SS |
K-10652S |
$ 239.00 |
| J/30 Boom & Components
-
Kenyon E-Section Boom |
| Description |
Part # |
Price |
| J/30 Boom Assemblies are complete
but do not include Gooseneck Toggle, K-10345A, or standard Vang
Bracket, K-1757-1, due to the increasing use of Solid Vangs
(which require special brackets). Standard Boom Assemblies use
the Flush-cut Outhaul Assembly, K-11471, while Racing
Boom Assemblies use the lightweight Cut-away Outhaul Assembly, K-43008,
with special tapered end cut to further reduce weight. Both styles are fully class legal.
|
|
| J/30 Standard Boom Assembly - Clear Anodized |
K-FB573SA |
$ Call. |
| J/30 Standard Boom Assembly - Painted White |
K-FB573SPW |
$ Call. |
| J/30 Racing Boom Assembly - Clear Anodized |
K-FB573RA |
$ Call. |
| J/30 Racing Boom Assembly - Painted White |
K-FB573RPW |
$ Call. |
|
| J/30 Boom Tubes - only are
available for those who wish to transfer hardware from a broken boom. Standard
Boom Tubes have a milled sail entrance and are cut to length for use with the Flush-cut
Outhaul Assembly, K-11471, while Racing
Boom Tubes have a milled sail entrance and a special tapered end cut for use with the
lightweight Cut-away Outhaul Assembly, K-43008. The Bare
Boom tube is long enough to be suitable for Standard or Racing versions, but is unmachined.
|
|
| J/30 Bare Boom Tube - Clear Anodized (12'9" - no machining) |
K-FBT573UA |
$ Call. |
| J/30 Standard Boom Tube - Clear Anodized (12'6" long)
R+2 W+3.5 |
K-FBT573SA |
$ Call. |
| J/30 Standard Boom Tube - Painted White (12'6") |
K-FBT573SPW |
$ Call. |
| J/30 Racing Boom Tube only - Clear Anodized (12'9" long) |
K-FBT573RA |
$ Call. |
| J/30 Racing Boom Tube only - Painted White (12'9") |
K-FBT573RPW |
$ Call. |
|
| Gooseneck Assembly with Cams |
K-43006 |
$ 539.00 |
| Gooseneck Replacement Casting only |
K-10364 |
$ 299.00 |
| Gooseneck Toggle Assembly w/ Reef Hooks |
K-10345A |
$ 159.00 |
| Gooseneck Vertical Clevis Pin - 3/8" x 2 3/8" Grip length |
K-CP6-76 |
$ 22.00 |
| Vang Bracket (SS) for Boom |
K-1757-1 |
$ 79.00 |
| Vang Reinforcement Sleeve - Internal Stiffener |
K-11903E |
$ 179.00 |
| Mainsheet Bail for 3/8" bolt |
K-2223 |
$ 45.00 |
| Outhaul Assembly – New Style – Flush Cut |
K-11471 |
$ 349.00 |
| Outhaul Assembly – Racing – Cut-away End |
K-43008 |
$ 449.00 |
