Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as
details of the Spar Sections and additional parts, are available on the Spar Section,
or
Parts pages. J/29 Masts use the Kenyon 4060 Mast Section.
J/29 Booms use the Kenyon E-Section Boom.
J/29 Spreaders use the Kenyon SP-3 Spreader
Section. |
| J/29M Mast & Components -
Kenyon 4060 Mast Section |
| Description |
Part # |
Price |
| J/29M Mast Assembly - Clear Anodized |
K-FM763A |
$ Call |
| J/29M Mast Tube Only - Clear Anodized x 43' 7 1/2" |
K-FMT763AW |
$ Call |
|
- Tube is Tapered with welded Trisect Masthead, and sailgate cutout, ready to
transfer hardware.
6
g9-4.5
|
|
|
|
| Masthead Chafe Cage |
K-11320 |
$ 389.00 |
| Masthead Sheaves - Aluminum - New Style Heavy-duty w/ integral
bushing
|
| - Main Halyard Sheave (2
1/2" OD x 1/4" ID) OR |
K-198-10AB4 |
$ 59.00 |
| - Main Halyard Sheave
(2" OD x 1/4" ID)
|
K-198-8AB4 |
$ 49.00 |
| - Jib & Wing Halyard
Sheaves (2 1/2" OD x 3/8" ID) 11447
|
K-198-10AB6 |
$ 65.00 |
| Main halyard sheave & Topping lift Clevis Pin (1/4" dia.) |
K-CP4-35 |
$ 10.00 |
| Sheave Axle Pin w/ Tab (for Jib halyard) 3/8" x 2 1/2" |
K-10680-1 |
$ 69.00 |
| Sheave Axle Pin w/ Tab (for Wing halyards) 3/8" x 3" |
K-10680 |
$ 72.00 |
| Headstay & Backstay Clevis Pin (1/2" dia.) |
K-CP8-35 |
$ 12.00 |
| Headstay Toggle Assembly w/ 1/2" Pin |
K-11537 |
$ 79.00 |
|
| T-Ball Backing Plate Tangs - Upper & Lower Shrouds (-7,-8,-9 wire) |
GIB 740-7 |
$ 12.00 |
| T-Ball Backing Plate Tangs - Intermediate Shrouds & Checkstays New |
GIB 740-6 |
$ 5.00 |
| T-Ball Backing Plate Tangs - Intermediate Shrouds & Checkstays Old |
GIB 740-5 |
$ 7.00 |
| T-Ball Retaining Plug, Rubber - Upper & Lower Shrouds |
GIB 742-7 |
$ 4.00 |
| T-Ball Retaining Plug, Rubber - Intermediates & Checkstays New |
GIB 742-6 |
$ 3.00 |
| T-Ball Retaining Plug, Rubber - Intermediates & Checkstays Old |
GIB 742-5 |
$ 3.00 |
| Pole lift exit box – SS Old style w/ plastic sheave |
K-11199P-1 |
$ 89.00 |
| Pole lift exit box – SS Old style w/ 2" Alum. sheave |
K-11199A-1 |
$ 129.00 |
|
| SS Exit Plate |
K-10960 |
$ 18.00 |
| Slide Conversion Kit for 4" Gate |
K-11656K |
$ 89.00 |
| Slide Conversion Kit for 6" Gate |
K-11754K |
$ 129.00 |
| - Closes Mainsail Gate for use w/
slugs
|
|
|
| - Measure gate cutout before ordering
|
|
|
| SS Roller Sailfeeder |
K-11087 |
$ 129.00 |
| Gooseneck Bracket SS - for 1 1/2" Toggle |
K-10650 |
$ 189.00 |
| Gooseneck/ Vang Bracket SS w/ bail - for 1 1/2" Toggle |
K-11361 |
$189.00 |
| Vang Tab (SS) for K-10650 Bracket |
K-10963 |
$ 79.00 |
| Halyard Lead Swivel Block |
K-10865 |
$ 259.00 |
| Mast Step Casting |
K-10664 |
$ 239.00 |
| J/29M Spreaders & Components -
Kenyon SP-3 Spreader Section
|
| Description |
Part # |
Price |
| Upper Port Spreader Assembly, Tapered - Clear Anodized |
K-FSU763AP |
$ 389.00 |
| Upper Starboard Spreader Assembly, Tapered - Clear Anodized |
K-FSU763AS |
$ 389.00 |
| Lower Port Spreader Assembly, Tapered - Clear Anodized |
K-FSL763AP |
$ 449.00 |
| Lower Starboard Spreader Assembly, Tapered - Clear Anodized |
K-FSL763AS |
$ 449.00 |
| |
|
|
| Upper Port Spreader Assembly, Tapered - Painted White |
K-FSU763WP |
$ 459.00 |
| Upper Starboard Spreader Assembly, Tapered - Painted White |
K-FSU763WS |
$ 459.00 |
| Lower Port Spreader Assembly, Tapered - Painted White |
K-FSL763WP |
$ 529.00 |
| Lower Starboard Spreader Assembly, Tapered - Painted White |
K-FSL763WS |
$ 529.00 |
| |
|
|
| Spreader Bar SS |
K-11295 |
$ 139.00 |
| J/29M Boom & Components -
Kenyon E-Section Boom |
| Description |
Part # |
Price |
J/29M Boom Assemblies are complete
but do not include Gooseneck Toggle, K-10345A, or standard Vang
Bracket, K-1757-1, due to the increasing use of Solid Vangs
(which require special brackets). Standard Boom Assemblies use
the Flush-cut Outhaul Assembly, K-11471, while Racing
Boom Assemblies use the lightweight Cut-away Outhaul Assembly, K-43008,
with special tapered end cut to further reduce weight. Both styles are fully class legal.
|
| J/29M Standard Boom Assembly - Clear Anodized |
K-FB763SA |
$ Call |
| J/29M Standard Boom Assembly - Painted White |
K-FB763SPW |
$ Call |
| J/29M Racing Boom Assembly - Clear Anodized |
K-FB763RA |
$ Call |
| J/29M Racing Boom Assembly - Painted White |
K-FB763RPW |
$ Call |
|
| J/29M Boom Tubes - only are
available for those who wish to transfer hardware from a broken boom. Standard
Boom Tubes have a milled sail entrance and are cut to length for use with the
Flush-cut Outhaul Assembly, K-11471, while Racing
Boom Tubes have a milled sail entrance and a special tapered end cut for use with the
lightweight Cut-away Outhaul Assembly, K-43008. The Bare
Boom tube is long enough to be suitable for Standard or Racing versions, but is unmachined.
|
|
| J/29M Bare Boom Tube only - Clear Anodized (11'9" long) |
K-FBT763A |
$ Call. |
| J/29M Standard Boom Tube only - Clear Anodized (11'6" long) |
K-FBT763SA |
$ Call. |
| J/29M Standard Boom Tube only - Painted White (11'6" long) |
K-FBT763SPW |
$ Call. |
| J/29M Racing Boom Tube only - Clear Anodized (11'9" long) |
K-FBT763RA |
$ Call. |
| J/29M Racing Boom Tube only - Painted White (11'9" long) |
K-FBT763RPW |
$ Call. |
|
| Gooseneck Assembly w/ Cams |
K-43006 |
$ 539.00 |
| Gooseneck Replacement Casting only |
K-10364 |
$ 299.00 |
| Gooseneck Toggle w/ Reef Hooks |
K-10345A |
$ 159.00 |
| Gooseneck Vertical Clevis Pin - 3/8" x 2 3/8" Grip length |
K-CP6-76 |
$ 22.00 |
| Vang Bracket (SS) for Boom |
K-1757-1 |
$ 79.00 |
| Vang Reinforcement Sleeve - Internal Stiffener |
K-11903E |
$ 179.00 |
| Mainsheet Bail for 3/8" bolt |
K-2223 |
$ 45.00 |
| Mainsheet Bail - Internal |
K-11428 |
$ 79.00 |
| Outhaul Assembly – New Style – Flush Cut |
K-11471 |
$ 349.00 |
| Outhaul Assembly – Racing – Cut-away End |
K-43008 |
$ 449.00 |
