|
|
| Common Replacement Parts are listed below. Additional specifications and photographs of all components listed below, as well as details of the Spar Sections and additional parts, are available on the Spar Section, or Parts pages. Harpoon 6.2 Masts now use the Kenyon 2740 Mast Section
w/ Internal Halyards, |
| Harpoon 6.2 Mast and Components - Kenyon 2740 Mast Section |
| Description | Part # | Price |
| Harpoon 6.2 Mast Assembly - 2740 Section w/ SP-2.2 Spreaders | K-FM612A | $ Call |
| - Clear Anodized | ||
| Harpoon 6.2 Mast Kit - 2740 Section x 26' 3" w/ Gate milled, all | K-FMK612A | $ Call |
| Hardware and SP-2.2 Spreaders - Clear Anodized | ||
| Harpoon 6.2 Mast Tube - 2740 Section x 26' 3" w/ gate milled - | K-FMT612A | $ 749.00 |
| - Clear Anodized - (4" Gate @ 2'2") | ||
|
|
||
| Masthead Assembly - Inset Channel | K-10584 | $ 119.00 |
| Masthead Cap - for Inset Channel Masthead | K-10569 | $ 22.00 |
| Main Halyard Sheave - Aluminum w/ BZ Bush. 1 3/4" OD 1/4" ID | K-198-7AB4 | $ 37.00 |
| Main halyard sheave Axle - Clevis Pin 1/4" | K-CP4-26 | $ 7.00 |
| Shroud Tang (4 required) | K-363B | $ 8.00 |
| Jib/Spinnaker Halyard Block w/ Forestay Attachment | K-84030 | $ 189.00 |
| Pole Lift Exit Block - Aluminum Sheave | K-11110A-1 | $ 79.00 |
|
|
||
| Spinnaker Pole Mast Eye | K-10562 | $ 89.00 |
| Mainsail Gate & Thumb Screw | K-1807K | $ 20.00 |
| Gooseneck Bracket SS – for 1" Toggle | K-10567 | $ 89.00 |
| Gooseneck Toggle SS | K-1993 | $ 19.00 |
| Eyestrap for Cunningham - Starboard (1 required) | K-226 | $ 3.00 |
| 4" Cleat - for Cunningham - Port (1 required) | D-10324 | $ 19.00 |
| Vang Bail Padeye (SS) for Mast | K-2114 | $ Call |
| Four-sheave Exit Block Assembly for Mast Step | K-10940-4A | $ 249.00 |
| Mast Step Casting only (fully machined) | K-10941 | $ 139.00 |
| Mast Step Hinge Plate Assembly | K-1374 | $ 99.00 |
| Mast Step Halyard Organizer Plate - fits under K-1374 | K-1374HP | $ 119.00 |
| Pin only for Mast Step Hinge Plate Assembly - 3/8" | K-9518 | $ 12.00 |
| Harpoon 6.2 Spreaders and Components - Kenyon SP-2.2 Spreader |
| Description | Part # | Price |
| SP-2.2 Port Spreader Assembly - Clear Anodized 27"@20� | K-FS612AP (Port) | $ 119.00 |
| SP-2.2 Starboard Spreader Assembly - Clear Anodized | K-FS612AS (Star.) | $ 119.00 |
| SP-2.2 Port Spreader Assembly - Painted White w/ Cast Tip | K-FS612APW (Port) | $169.00 |
| SP-2.2 Starboard Spreader Ass'y - Painted White w/ Cast Tip | K-FS612ASW (Star) | $ 169.00 |
| SP-2.2 Port Spreader Tube only - Clear Anodized | K-FST612AP (Port) | $ 99.00 |
| SP-2.2 Starboard Spreader Tube only - Clear Anodized | K-FST612AS (Star.) | $ 99.00 |
| SP-2.2 Spreader Tip - Original Cast Aluminum | K-10262 | $ 59.00 |
| SP-2.2 Spreader Tip - New Style (Hard Plastic) | K-10777P | $ 22.00 |
| SP-2.2 Wrap-around Spreader Bracket (for 2740 Mast, 20� aft) | K-10561 | $ 229.00 |
| Harpoon 6.2 Boom and Components - Kenyon 2331 Boom |
| Description | Part # | Price |
| Harpoon 6.2 Boom Assembly - Clear Anodized | K-FB612A | $ Call |
| Harpoon 6.2 Boom Kit - 2331 Section x 8' 9" w/ all Hardware - | K-FBK612A | $ Call |
| - Clear Anodized | ||
| Harpoon 6.2 - 2331 Boom Tube only x 8' 9" - Clear Anodized | K-FBT612A | $ 239.00 |
|
|
||
| Gooseneck Assembly w/ Tack Pin & SS Yoke | K-43106 | $ 119.00 |
| Gooseneck Replacement Casting only w/ Tack Pin | K-10448-1A | $ 99.00 |
| Gooseneck Toggle | K-1993 | $ 19.00 |
| Mainsheet/Vang Bail (SS) for Boom (2 required) | K-10456 | $ 32.00 |
| Boom Bail Bolt Assembly | K-10456BA | $ 9.00 |
| Clam Cleat - CL203 (2 required) | K-9115X | $ 5.00 |
| SS Eyestrap/Fairlead (5 required) | K-226 | $ 3.00 |
| Cheek Block - Original - (2 required) | K-140X | $ 24.00 |
| Outhaul Casting | K-10448 | $ 59.00 |
