 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
3756 Old-Style Internal Gooseneck Parts |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
3756 Old-Style Internal Gooseneck Parts |
|
|
|
|
| Note: Kenyon Internal Gooseneck Assemblies are now equipped with the new friction-lock lever-action cams for greater holding ability, and SS cover plates to keep the reef lines captive at all times. Old-Style units featured Spring Cams (with or w/o handles), and different reef sheaves than the improved version. The Old-Style units are easily identified by the absence of the SS cover plates. While upgrading to the improved style using one of the K-11443 Conversion Kits (below) is recommended, original parts for the Old-Style gooseneck are still available, below. | |
|
|
|
| Reefing Sheave for Old Style 3756 Gooseneck: K-10358: Molded Nylon sheave w/ integral Bronze bushing is 1 1/16" OD x 35/64" (<9/16") wide x 3/8" ID.
|
|
| Reefing Sheave/Cam Axle for Old Style 3756 Gooseneck: K-10381: | |
| SS axle pin is 3/8" dia. x 2.34" grip, with a turned
groove on each end to accept 3/8" SS Snap Rings, K-63015 (2 included).
|
|
| Reef Cam Assembly for Old Style Gooseneck - Port:
K-GNCA-P: Reef Cam Assembly for Old Style Gooseneck - Starboard: K-GNCA-S: |
|
| Extruded aluminum Spring-Cam assembly fits on 3/8" pin
and includes Cam, SS spring, molded nylon insert, and one SS Snap ring for standard
3/8" axle. These items are no longer available, but the
newer style that incorporate a SS handle (below) are.
|
|
| Reef Cam Assembly w/ handle for Old Style Gooseneck -
Port: K-GNCAH-P: Reef Cam Assembly w/ handle for Old Style Gooseneck - Starboard: K-GNCAH-S: |
|
| Extruded aluminum Spring-Cam assembly with handle fits on
3/8" pin and includes Cam, SS spring, molded nylon insert, and one SS Snap ring for
standard 3/8" axle. As K-GNCA-P, and S
(above), but cam incorporates a SS handle. Specify Port or Starboard.
|
|
| Outhaul Sheave for 3756 Gooseneck: K-198-7A: Anodized aluminum sheave is 1 3/4" OD x 31/64" wide x 3/8" ID.
|
|
| Outhaul Sheave Axle for 3756 Gooseneck:
K-10380: SS axle pin is 3/8" dia. x 1" grip, with a turned groove on each end to accept 3/8" SS Snap Rings, K-63015 (2 included).
|
|
| SS Snap Rings for 3/8" Axle Pin: K-63015-2P: In 2-pack. Require small snap ring pliers for attachment.
|
 |
|
|
|
|
New-Style Double Reef Cam Conversion Kit for 3756: K-11443: Cam Conversion Kit for 3756 Gooseneck converts Old-Style Spring-Cam arrangement to the New-Style friction cam assembly. Easily installed Kit includes everything necessary for 2 reef lines including Cam levers, adjustable friction washers, reef sheaves, SS spacers, Cover plates, bolts and locknuts. No machining is required. Individual components are listed separately, See Parts for 3756 Internal Gooseneck Assembly.
|
|
| New-Style Port Reef Cam Conversion Kit for
3756: K-11443P: New-Style Starboard Reef Cam Conversion Kit for 3756: K-11443S: |
|
| Single Cam Conversion Kit for 3756 Gooseneck
converts Old-Style Spring-Cam arrangement to the New-Style friction cam assembly. Easily
installed Kit includes everything necessary for single reef line including Cam lever,
adjustable friction washers, reef sheave, SS spacer, Cover plate, bolts and locknuts. No
machining is required. Specify Port or Starboard. Individual components are listed
separately, See Parts
for 3756
Internal Gooseneck Assembly.
|
|
| New-Style Sheave Conversion Kit for 3756 Gooseneck: K-11443NC: | |
| Sheave Conversion Kit for 3756 Gooseneck converts Old-Style Gooseneck to the New-Style with Cover Plates, Sheaves, and No cams. Easily installed Kit includes everything necessary for leading reef lines down and aft, including (2) reef sheaves, (4) SS spacers, Port and Starboard Cover plates, bolts and locknuts. No machining is required. Individual components are listed separately, See Parts for 3756 Internal Gooseneck Assembly. As K-11443, above, but with 2 SS Spacers to replace the reef cams. | |
