Stanchion Bases - 25mm Metric

*Triangular 25mm Stanchion Base - 0�: SB 36-M25T-0�:* *Triangular 25mm Stanchion Base - 5�: SB 36-M25T-5�:* Triangular Stanchion Base for 25mm Metric Stanchions. Formed and welded SS Base is 2 7/8" (73mm) long (fore and aft) x 3 1/2" (88mm) wide. Base attaches to Deck with (2) 8mm screws on 48mm (2 7/8") (fore and aft) hole centers, with a third 8mm screw 2 9/16" (65mm) inboard of the others. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side. Goi 97442/97440
*Rectangular 25mm Stanchion Base - 0�: SB 36-M25R-0�:* *Rectangular 25mm Stanchion Base - 5�: SB 36-M25R-5�:* Rectangular Stanchion Base for 25mm Metric Stanchions. Formed and welded SS Base is 3 9/16" (90mm) long x (maximum) 2 9/16" (65mm) wide. Base attaches to Deck with (4) 6mm screws on 60mm (2 3/8") (fore and aft) x 35mm (1 3/8") (athwartships) hole centers. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side. Goi 97439/97441
*Rectangular 25mm Stanchion Base w/ Double Bail - 0�: SB 36-M25DB-0�:* *Rectangular 25mm Stanchion Base w/ Double Bail - 5�: SB 36-M25DB-5�:*
Rectangular Stanchion Base for 25mm Metric Stanchions has Double Bails. Welded SS Base is 3 3/4" (95mm) long x (maximum) 2 7/8" (73mm) wide. Base attaches to Deck with (4) 6mm screws on 65mm (2 9/16") (fore and aft) x 41mm (1 5/8") (athwartships) hole centers. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side.


*Conical SS Stanchion Base: SB 36-M25CB:* Conical SS Stanchion Base for 25mm Metric Stanchions. Base has 10mm threaded hole for attachment to Deck with a single bolt and (2) 5mm set screws to secure Stanchion. Cast SS Stanchion Base has 45mm (1 3/4") round base and is 70mm (2 3/4") high.

*Internal Base, 22mm OD, 16mm Threaded Post: SB 36-M25IS-16:*
SS Stanchion Base has 21.9mm Stud to fit inside Special 25mm Metric SS Stanchions. Cast SS Base is 2 3/8" (60mm) long x (maximum) 1 3/4" (45mm) wide. Base attaches to Deck with integral 16mm x 50mm (2") threaded Post, Stanchion Stud is 22mm OD, and has milled flats (fore & aft) to allow for attachment of Stanchion threaded for screws. Recess at 45mm from bottom allows for semi-permanent attachment of Stanchion with rivet. Goi 115633
*Internal Base, 19.5mm OD, 16mm Threaded Post: SB 36-M25IS-16A:*
SS Stanchion Base has 19.5mm Stud to fit inside Special 25mm OD Aluminum Metric Stanchions. Cast SS Base is 2 3/8" (60mm) long x (maximum) 1 3/4" (45mm) wide. Base attaches to Deck with integral 16mm x 50mm (2") threaded Post, Stanchion Stud is 19.5mm OD, and has milled flats (fore & aft) to allow for attachment of Stanchion threaded for screws. Recess at 45mm from bottom allows for semi-permanent attachment of Stanchion with rivet. As SB 36-M25IS-16, above, but with 19.5mm Stud. Goi 106654X
*Internal Base w/ Toerail Lip, 22mm OD, 14mm Threaded Post: SB 36-M25IS-14L:*
SS Stanchion Base has 21.9mm Stud to fit inside Special 25mm Metric SS Stanchions. Cast SS Base has Lip to touch Deck beyond Toerail, Base is 2 7/8" (75mm) long x (maximum) 2 1/4" (56mm) wide and attaches to Deck with integral 14mm x 50mm (2") threaded Post, Stanchion Stud is 22mm OD, and has 6mm threaded hole (fore & aft) at 15mm from bottom for Stanchion attachment.

Your cart

Spars, Rigging, and Hardware for Sailboats