 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Metric Aluminum Stanchion Bases |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Metric Aluminum Stanchion Bases |
|
|
|
|
| 25mm Metric Stanchion Bases - Aluminum |
| Cast Aluminum Stanchion Bases have been produced in a variety
of configurations, by many different Boat Builders and Hardware manufacturers. If a
Stanchion Base you require is not listed here, please contact us with a sketch and
complete dimensions, including base footprint and hole spacing.
Stanchion Bases listed here are for use with 25mm Metric
Stanchions,
unless otherwise noted. Goiot Aluminum Stanchion Bases
|
|
|
| Goiot Stanchion Bases | ||
|
Goiot Toerail Mounted Stanchion Base: Goi 808-8: Toerail-mounted Stanchion Base adds additional support to Stanchion. Clear anodized, extruded aluminum Stanchion Base has lug that locks into Toerail lip and attaches to deck with (2) 6mm (1/4") FH screws. Base has 6mm Clevis Pin (included) to secure stanchion, and 25mm hole for Stanchion. For use with 25mm stanchions and Goiot 808 Toerail. As used on Gibsea 33, and others.
|
 |
|
|
Goiot Deck Mounted Stanchion Base: Goi 800-8: Triangular-shaped Stanchion Base attaches to Deck with (3) 6mm (1/4") FH screws on 65mm (2 9/16") (fore and aft) x 68mm (2 11/16") (athwartships) hole centers. Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Base has 6mm hole for attachment of furling blocks and sits 4mm off of deck, to improve drainage. ###
|
 |
|
|
Goiot Toerail Mounted Stanchion Base: Goi 810-8: Toerail-mounted Stanchion Base adds additional support to Stanchion. Triangular-shaped Stanchion Base has lug that locks into Toerail slot and attaches to deck with (2) 6mm (1/4") FH screws on 57mm (2 1/4") centers. Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Unit is (maximum) 3" (77mm) high x 3 3/16" (80mm) wide. For use with Goiot 811 Toerail. 811-27
|
 |
|
|
Goiot Toerail Mounted Stanchion Base: Goi 820-8: Toerail-mounted Stanchion Base adds additional support to Stanchion. Rectangular Stanchion Base has threaded holes for attachment to Toerail side with (2) 6mm screws on 60mm (2 5/16") centers, and through Toerail with (1) 6mm (1/4") screw (under Stanchion). Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Unit is (maximum) 2 7/8" (73mm) high x 3" (77mm) wide. For use with Goiot 822 and 823 Toerail. 822-27
|
 |
|
|
Goiot Plastic Stanchion Sleeve: Goi 810-PS27: 'Heat-Shrink' stanchion sleeve insulates Aluminum Stanchion Base from Stainless Steel Stanchion. Clear plastic sleeve is 85mm (3 3/8") long and adds 2mm to Stanchion diameter when applied. Included with all Goiot Stanchion Bases, Sleeves are also available separately.
|
||
|
|
||
| Miscellaneous Aluminum Stanchion Bases | ||
|
Toerail Mounted Stanchion Base: SB 36-GS1: Toerail-mounted Stanchion Base adds additional support to Stanchion. Rectangular Stanchion Base has lug that locks into Toerail slot and attaches to deck with (2) 6mm (1/4") FH screws on 55mm (2 3/16") centers. Clear anodized Cast aluminum Base is 3 1/4" long x 2 1/2" wide (excluding lug) x 2 1/2" high (at Toerail), and has 6mm tapped hole (on fore or aft side) for screw to secure stanchion. Note: This item was originally produced with a Black anodized finish (no longer available). As used with Sparcraft Toerail on Gibsea, Kirie Elite, Feeling, and others. GS-1TC
|
 |
|
|
|
||
|
Toerail Mounted Stanchion Base w/ Deck Lip: SB 36-AB600B: Toerail-mounted Stanchion Base attaches to deck with (2) 6mm (1/4") FH screws on 1 15/16" (50mm) centers and has 5mm threaded hole for screw which attaches it to Toerail. Base has separate 8mm threaded hole for screw to secure Stanchion. Cast aluminum Base is 2 3/4" (70mm) long (inboard) x 2" long (at Toerail) x 2 3/4" (70mm) wide with Black anodized finish. As used on Beneteau First 26, First 29, and others.
|
 |
|
|
Toerail Mounted Stanchion Base w/ Deck Lip: SB 36-AB314: Toerail-mounted Rectangular Stanchion Base attaches to deck with (2) 6mm (1/4") FH screws on 2 3/16" (55mm) centers, and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. Cast aluminum Base is 3 3/8" (85mm) long x 2 1/4" (57mm) wide with clear anodized finish. As used on Beneteau First 285, some 32s5, some 35s5, and others. 334620B?
|
 |
|
|
Toerail Mounted Stanchion Base: SB 36-AB550: Toerail-mounted Rectangular Stanchion Base bolts through Toerail and Deck with (2) 6mm (1/4") FH screws on 2 3/4" (70mm) centers, and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. Cast aluminum Base is 3 1/2" (90mm) long x 1 7/8" (47mm) wide x 2 3/4" (70mm) high with clear anodized finish. As used on Beneteau First 30E, 305, 32, 345, 35, some 375, some 405, 42, some 435E, and others: Idylle 10.50, and others.
|
||
|
Toerail Mounted Stanchion Base: SB 36-AB560: Toerail-mounted Rectangular Stanchion Base bolts through Toerail and Deck with (2) 6mm (1/4") FH screws on 2 3/4" (70mm) centers, and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. Cast aluminum Base is 3 1/2" (90mm) long x 1 7/8" (47mm) wide x 2 3/4" (70mm) high with clear anodized finish. As SB 36-AB550, above, but with a higher Toerail cutout. As used on Beneteau 435E, and others.
|
 |
|
| Toerail Mount Stanchion Base w/ Tapered Socket: SB 36-AB560-T: | ||
| Toerail-mounted Stanchion Base as SB 36-AB560,
above, but with Tapered Socket for special Stanchion with Tapered bottom.
Commonly used with Stanchion Gate Brace assemblies. As used on Beneteau 390, and others.
650
|
||
|
Mini Toerail Mount Stanchion Base: SB 36-AB877: 'Mini' Toerail-mounted Triangular Stanchion Base bolts through Toerail and Deck with (1) 8mm (5/16") screw (under Stanchion), and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. "Mini" Cast aluminum Base is (maximum) 2 1/8" (54mm) long (fore & aft) x 1 7/8" (48mm) wide x 2 3/4" high with clear anodized finish. As used on Beneteau First 235, 285, 310, some 32s5, some 35s5, some 375, 38s5, some 405, 41s5, and others.
|
 |
|
| Mini Toerail Mount Stanchion Base w/ Tapered Socket: SB 36-AB877-T: | ||
| Toerail-mounted Stanchion Base as SB 36-AB877,
above, but with Tapered Socket for special Stanchion with Tapered bottom.
Commonly used with Stanchion Gate Brace assemblies.
878
|
||
| Triangular Stanchion Base: SB 36-AB490: Triangular Stanchion Base bolts through Deck with (3) 6mm (1/4") FH screws on 1 3/4" (44mm) centers. Cast aluminum Base is (maximum) 2 3/8" (54mm) long (fore & aft) x 2" (51mm) wide x (maximum) 1 3/8" high with black anodized finish. As used on Beneteau, and others.
|
 |
|
|
|
~ Back to Stanchion Bases Main Page ~