 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-SPAR Cleats |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-SPAR Cleats |
|
|
|
|
| Gray anodized aluminum (and Plastic!) Cleats are used on a variety of Z-Spar masts. | |
|
Spar Cleat – Aluminum - 120mm: Z-1145: Aluminum Spar Cleat is 120mm (4 5/8") long x 20mm (3/4") wide, and fastens with (2) 5mm (3/16") fasteners on 30mm (1 3/16") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws.
|
|
|
Spar Cleat – Plastic - 120mm: Z-1145P: Gray Plastic Spar Cleat is 120mm (4 5/8") long, and fastens with (2) 5mm (3/16") fasteners on 30mm (1 3/16") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws. Not recommended for any but the lightest of applications.
|
|
|
Spar Cleat – Aluminum - 170mm: Z-1081: Aluminum Spar Cleat is 170mm (6 3/4") long x 30mm (1 3/16") wide, and fastens with (2) 6mm (1/4") fasteners on 45mm (1 3/4") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws.
|
|
|
Spar Cleat – Plastic - 170mm: Z-1081P: Gray Plastic Spar Cleat is 170mm (6 3/4") long x 25mm (1") wide, and fastens with (2) 6mm (1/4") fasteners on 45mm (1 3/4") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws. Not recommended for any but the lightest of applications. |
|
|
Four Hole Spar Cleat – Aluminum - 205mm: Z-1192: Four Hole Aluminum Spar Cleat is 205mm (8 1/8") long, and fastens with (4) 6mm (1/4") fasteners on 60mm (2 3/8") x 42mm (1 5/8") hole centers. Rectangular base is 80mm x 56mm (3 1/8" x 2 1/4"). Installed in the factory with rivets, can also be installed with machine screws.
|
|
|
|
|
|
Clam Cleat w/ Fairlead, Aluminum - Small: Z-1126X: Cast Aluminum Clam Cleat with Fairlead is suitable for line from 5mm to 8mm. Unit is 55mm long x 17mm wide (2 3/16" x 5/8"), and fastens with (2) 5mm (3/16") fasteners on 27mm (1 1/16") hole centers. Installed in the factory with rivets, can also be installed with machine screws.
|
|
|
Clam Cleat, Aluminum - Medium: Z-1662X: Cast Aluminum Clam Cleat is suitable for line from 6mm to 10mm. Unit is 77mm long x 20mm wide (3" x 13/16"), and fastens with (2) 5mm (3/16") fasteners on 58mm (2 1/4") hole centers. Installed in the factory with rivets, can also be installed with machine screws. |
|