 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
1 7/8" OD Spinnaker Poles & Fittings |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
1 7/8" OD Spinnaker Poles & Fittings |
|
|
|
|
| Standard 1 7/8" OD Spinnaker Pole Tube
Measurements: 1.875" OD x 1.75" ID (47.6mm x 44.5mm) Wall Thickness: .065" Weight/ft.: .43 lbs. Moments of inertia: Circumference: 5.9" Alloy: 6063-T6 Stock Lengths: Up to 20' Common Boat usage: 15' - 20' LOA |
|
|
1 7/8" OD Standard Spinnaker Pole Tube is used in a variety of applications,
including Spinnaker Poles and Whisker Poles.
Standard Pole Fittings for this tube size are listed below.
|
|
|
|
|
|
Standard 1 7/8" OD Spinnaker Pole Tube
1 7/8" OD Spinnaker Pole Tube - Clear Anodized: RTA 1.87-065A-___: |
|
|
|
|
|
1 7/8" OD Spinnaker Pole End Fittings Standard End Fittings are suitable for use on the Outboard end of the Pole, and on the Inboard end when a Ring Car (or a fixed Mast Ring) is used on the Mast. Their use on both ends is required when using an End for End jibing procedure. See also: Spinnaker Cars. |
|
|
|
|
|
Standard Pole Ends for 1 7/8" OD Tube Listed below are Standard End Fittings - These pole ends are suitable for either (or both) ends of a spinnaker pole or whisker pole, or the inboard end of a reaching strut. Their use on both ends is required when using an End for End jibing procedure. When used on the Inboard end a Ring Car (or a fixed Mast Ring) is required on the Mast. |
|
|
|
|
|
'Ultra' Plastic EL Piston End for 1 7/8" OD Tube: EF-187-UXPL: Forespar 'Ultra' composite EL Piston End incorporates Spectra loops for attachment of pole lift and foreguy (or bridles), and includes an external Spectra Trip lanyard loop. Self-Latching EL Piston End has a stainless steel spring-loaded plunger pin that can be engaged simply by pushing onto Ring or Guy. Gray molded End Fitting projects 3" (maximum) from tube end. F3S |
 |