 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Pivoting Strap Tangs |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Pivoting Strap Tangs |
|
|
|
|
| Pivoting Strap Tangs Used in a wide variety of applications, these Single Strap Tangs mount on a single bolt, and are especially suited for use with Intermediate and Lower Shrouds where angles might vary, or might not be precisely determined ahead of time. See also, Tangs Main Page. |
|
|
|
|
| Short Shroud Tang for 3/16" Pin, 1/4" Bolt: K-617: Lightweight SS Shroud Tang mounts on a 1/4" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Tang is 2" long x 5/8" wide x .062" thick with (1) 1/4" mounting hole and (1) 3/16" Pin Hole. Tang Assembly mounts on a 1/4" bolt, hole centers are 1 5/16" apart. Used in a variety of applications.
|
|
|
‘Dog-Bone’ Shroud Tang for 3/16" Pin, 5/16" Bolt: K-9581-53: Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 5/16" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 5/16" mounting hole and (1) 3/16" Pin Hole. Hole centers are 3" apart.
|
|
|
‘Dog-Bone’ Shroud Tang for 3/16" Pin, 3/8" Bolt: K-9581-63: Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 3/8" mounting hole and (1) 3/16" Pin Hole. Hole centers are 3" apart.
|
 |
|
|
|
|
Heavy Duty Shroud Tang for 1/4" Pin, 5/16" Bolt: K-910S: Heavy SS Shroud Tang mounts on a 5/16" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 2 3/4" long x 13/16" wide x 5/32" (.155") thick with (1) 5/16" mounting hole and (1) 1/4" Pin Hole. Hole centers are 2" apart. #dl
|
|
|
|
|
|
‘Dog-Bone’ Shroud Tang for 1/4" Pin, 3/8" Bolt: K-9581-64: Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 3" apart.
|
|
|
Shroud Tang for 1/4" Pin, 3/8" Bolt: SP-209: Lightweight SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1 1/16" wide x .070" thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 2 3/4" apart. As used on a variety of Cape Dory's. D
|
|
|
Heavy Duty Shroud Tang for 1/4" Pin, 3/8" Bolt: K-363B: Heavy SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 2 3/4" apart.
|
|
|
Long Shroud Tang for 1/4" Pin, 3/8" Bolt: K-910: Long, Heavy SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 3" apart.
|
|
|
|
|
|
Shroud Tang for 5/16" Pin, 3/8" Bolt: K-363C: SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 5/16" Pin Hole. Hole centers are 2 3/4" apart. Replaces SP-202 (.120" thick).
|
|
|
Tapered Shroud Tang for 5/16" Pin, 1/2" Bolt - Special: PP 21184TT: Tapered SS Shroud Tang mounts on a 1/2" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 4 5/16" long x 1 9/16" wide (maximum, at top) x .090" thick with (1) 1/2" mounting hole and (1) 5/16" Pin Hole. Hole centers are 3" apart. As used by Bristol and Pearson.
|
|
|
Heavy Duty Shroud Tang for 5/16" Pin, 3/8" Bolt: K-2251: SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 4" long x 1" wide x 3/16" (.188") thick with (1) 3/8" mounting hole and (1) 5/16" Pin Hole. Hole centers are 3" apart. D40368
|
|
|
|
|
| Shroud Tang for 3/8" Pin, 11/16" Hole: K-2161: SS Shroud Tang for use with a Shroud up to 1/4" dia. using standard Aircraft Fork. Designed for mounting using 11/16" OD Flange Bushing, K-9631, and a 3/8" bolt for minimum weight aloft. Tang is 5 3/8" long x 1 1/4" wide x 3/16" (.188") thick with (1) 11/16" mounting hole and (1) 3/8" Pin Hole. Hole centers are 4" apart. D40375
|
|
