Fixed Strap Tangs

Fixed Strap Tangs Fixed Strap Tangs mount with multiple fasteners and are especially suitable for use in Upper Shroud applications as they allow no fore and aft movement. They are also suited for other applications where the tang should not be allowed to pivot. See also, Tangs Main Page.

*Fixed Shroud Tang for 3/16" Pin: K-356-83:* SS Shroud Tang was designed for use with Shrouds up to 1/8" diameter using standard Aircraft Fork. Tang is 6" long x 1" wide x .065" with (3) 3/16" and (1) 1/2" mounting holes and (1) 3/16" Pin Hole. Upper fastener hole centers are 3/4" apart, with 1/2" hole 15/16" below lowest. Pin Hole center is 2 1/2" from lower mounting hole. Assembly attaches to the mast with (3) 3/16" screws or rivets. Lower 1/2" mounting hole allows for use with old-style through-bolt Spreader Bases.
Fixed Shroud Tang for 1/4" Pin: RR 85-1206-4: SS Shroud Tang was designed for use with Shrouds up to 5/32" diameter using standard Aircraft Fork. Tang is 5 1/4" long x 1 1/4" wide x .100" with (1) 3/8" and (1) 1/4" mounting holes and (1) 1/4" Pin Hole. Bolt hole centers are 1 1/2" apart, Pin Hole center is 2 3/4" from lower bolt. Assembly attaches to the mast with (1) 3/8" and (1) 1/4" bolt.
Fixed Shroud Tang for 5/16" Pin: RR 85-1206-5: SS Shroud Tang was designed for use with Shrouds up to 7/32" diameter using standard Aircraft Fork. Tang is 6 1/2" long x 1" wide x 1/8" (.120") with (2) 3/8" mounting holes and (1) 5/16" Pin Hole. Bolt hole centers are 1 7/8" apart, Pin Hole center is 3 3/8" from lower bolt. Assembly attaches to the mast with (2) 3/8" bolts. Mounting requires (2) 3/8" holes in side of mast. Especially suitable for use in Upper Shroud applications as the 2 bolts allow no fore and aft movement, it is also suited for other applications where the tang should not be allowed to pivot. As used for Upper Shroud Tang on O’Day 27.
Heavy Fixed Shroud Tang for 5/16" Pin: RR 85-1208-5: Heavy SS Shroud Tang was designed for use with Shrouds up to 7/32" diameter using standard Aircraft Fork. Tang is 6 1/2" long x 1" wide x 3/16" (.186") with (2) 1/2" mounting holes and (1) 5/16" Pin Hole. Bolt hole centers are 2" apart, Pin Hole center is 3 3/8" from lower bolt. Assembly attaches to the mast with (2) 3/8" bolts. Mounting requires (2) 3/8" holes in side of mast. As used for Upper Shroud Tang on Sabre 28.
Fixed Shroud Tang for 3/8" Pin: SP-204: SS Shroud Tang was designed for use with Shrouds up to 7/32" diameter using standard Aircraft Fork. Tang is 6 1/4" long x 1 1/4" wide x .120" with (2) 3/8" mounting holes and (1) 3/8" Pin Hole. Bolt hole centers are 1 7/8" apart, Pin Hole center is 3 1/8" from lower bolt. Assembly attaches to the mast with (2) 3/8" bolts. Mounting requires (2) 3/8" holes in side of mast.

Your cart

Spars, Rigging, and Hardware for Sailboats