 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Exit Plates |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Exit Plates |
|
|
|
|
| Kenyon Exit Plates | |
| SS Exit Plates are used to exit any internal control line (halyards, pole lifts, etc.) from a spar where no directional change is required. Suitable for use with wire or rope, Exit Plates feature welded or formed bars to prevent chafe on the interior mast wall, and smooth formed outer surfaces to reduce wear on all control lines. See also, Exit Plates - Main Page. | |
|
|
|
Stainless Steel Exit Plate: K-10960: SS Exit Plate is 3 3/4" long x 1 3/8" wide and will handle line up to 1/2" diameter. Assembly fits in mast cutout 2 3/4" high x 3/4" wide and fastens with (4) #10 (3/16") fasteners on 3 1/4" (vertical) x 7/8" (horizontal) hole centers.
|
|
| Stainless Steel Exit Plate: K-10961: SS Exit Plate is 4 3/8" long x 1 3/4" wide and will handle line up to 3/4" diameter. Assembly fits in mast cutout 3 1/4" high x 1" wide and fastens with (4) #10 (3/16") fasteners on 3 3/4" (vertical) x 1 1/8" (horizontal) hole centers. This item is no longer available and is shown here for reference only.
|
|
| Stainless Steel Exit Plate: K-10974: SS Exit Plate is 3 1/4" long x 2" wide and will handle line up to 1/2" diameter. Assembly fits in mast cutout 2 1/4" high x 3/4" wide and fastens with (4) #10 (3/16") fasteners on 2 5/8" (vertical) x 1 3/8" (horizontal) hole centers. This Exit Plate was designed specifically to replace (and is far superior to) the discontinued Kenyon Roller Exit Block (D-83919) which had 2 aluminum rollers and mounted with 6 screws. In this replacement application, the K-10974 Exit Plate fits in the same slot, uses 4 of the 6 original mounting holes, and covers the other 2.
|
|
| Oval Stainless Steel Exit Plate: K-11243: Oval shaped SS Exit Plate is 5" long x 1 3/4" wide and will handle line up to 3/4" diameter. Assembly fits in tapered mast cutout 3" high x 1" wide and fastens with (1) #10 (3/16"), and (2) #8 (5/32") fasteners on 3 1/4" (vertical) x 1 1/8" (horizontal) hole centers.
|
|
