 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon K-1264 Hinged Mastplate Assembly |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon K-1264 Hinged Mastplate Assembly |
|
|
|
|
|
Hinged Mast Plate Assembly: K-1264: SS double channel hinge assembly is used on Kenyon D-Section (3 3/4" x 2 1/4") and smaller Mast Sections. Lower channel bolts to deck w/ (4) 1/4" bolts on 4" x 1 11/16" hole centers. Top plate hinges forward or aft on (2) 1/4" pins, and is attached to mast step with (2) 1/4" bolts and special compression spacer nuts (included), to handle greater rigging loads. Hole pattern is compatible with most Kenyon Mast Steps, other Steps will have to be drilled. Base is 5 1/4" x 2 3/4", unit is 3/4" high.
|
|
|
|
|
| Kenyon Spars K-1264 - Components | |
| Pin for K-1264 Hinged Mast Plate Assembly: K-9262: SS Pin is 1/4" diameter with a 2 3/4" grip length, and is pointed on one end for easy insertion. Includes (2) cotter rings.
|
|
| Top Plate only for K-1264 Hinge Assembly: K-9263: Formed SS Top Plate is 5 1/4" long x 2 3/4" wide x .076" thick, with (2) 1/4" holes (on 1 7/16" centers) for attachment to Mast Step.
|
|
| Bottom Plate only for K-1264 Hinge Assembly: K-9264: Formed SS Bottom Plate is 5 1/4" long x .076" thick, with (4) 1/4" holes for attachment to Deck.
|
|
| Compression Spacer for K-1264 Hinge Assembly: K-9265A: Anodized Aluminum Spacer is 1" Round Nut x 1/2" thick with a 1/4"-20 interior thread. Includes standard SS bolt 1/4"-20 x 3/4" long. |
 |
