 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
D-Section Standard Gooseneck Assemblies |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
D-Section Standard Gooseneck Assemblies |
|
|
|
|
| D-Section Gooseneck Assembly w/ 1/2" Slide: K-10553: Cast aluminum boom end fitting includes captive SS tack pin and SS yoke, K-80, 1" SS Toggle, K-1993, and SS Gooseneck slide, K-1685A. Fits B, D, E, 3049, 3650 and all mast sections using 1/2" round slugs or boltrope.
|
|
|
|
|
D-Section Gooseneck Assembly w/ Toggle: K-2123: As K-10553, above, but without SS Gooseneck slide. Toggle attaches directly to any of the Kenyon gooseneck brackets designed for a 1" toggle (see individual mast sections), and Kenyon gooseneck slides designed for a 1" toggle.
|
|
|
|
D-Section Gooseneck Assembly w/ Yoke: K-2123NT: As K-2123, above, but without SS Gooseneck Toggle. Yoke attaches to a variety of Gooseneck Toggles up to 1" wide, but is normally used with Kenyon 1" SS Toggle, K-1993.
|
 |
|
|
D-Section Gooseneck Casting with Tack Pin: K-D333A: Black Epoxy coated Gooseneck casting with captive SS tack pin has 3/8" hole in 1 1/4" square recess for attachment of K-80A SS Yoke Assembly for 1" Toggle. Casting with tack pin only, as used in the assemblies listed above.
|
 |
| SS Gooseneck Slide - 1" for Large Boltrope: K-1685A:
SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits B, D, E, 3049, 3650 and all mast sections using 1/2" round slugs or boltrope.
|
|
|
| SS Gooseneck Slide - 1" for Small Boltrope: K-10331A: SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits A, C-1, C-6, 2331, MORC and other mast sections that can accommodate only 3/8" round slugs or boltrope.
|
|
|
| SS Gooseneck Slide - 1" for 7/8" Flat Track: K-1686A:
SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits on a SS 7/8" x 1/8" Flat External Track.
|
|
|
| Gooseneck Slide & Toggle Assembly for 3/4" Internal Flat Track: K-PP-M6ATS: | ||
| Aluminum Gooseneck Slide with 1 1/2" Toggle
to fit D-Section Gooseneck Assembly with Tack and Yoke, K-2123NT,
above, and K-2123RRNT. Slide fits integral Track in Kenyon 3550,
3756, Rig-Rite, Pearson, Metalmast and most other Mast Sections with a 3/4" Internal
Flat Track. Gooseneck Slide is 4" long and features 5/16" hole for downhaul line
or shackle. Toggle is 3/4" wide and has 1/4" horizontal Pin hole. Includes nylon
spacer washers and SS bolt w/ locknut to attach to standard 1" SS Yokes.
|
||
| SS Yoke Assembly for 1" Toggle: K-80A: SS Yoke attaches to various boom end castings with a 3/8" bolt, and to the 1" SS Toggle, K-1993, with a 1/4" SS bolt and locknut (included). Yoke is formed from 1" wide stock and is 1 3/16" wide (outside), and 1 1/32" wide (inside), 1/4" hole centers are 13/16" from bottom inside.
|
|
|
| SS Gooseneck Toggle - 1": K-1993: SS Gooseneck Toggle attaches directly to any of the Kenyon gooseneck brackets or gooseneck slides designed for a 1" Toggle, and to any boom end casting using the K-80, or K-8890 SS yoke assemblies. Toggle is 1" square x 1 1/8" long with 1/4" holes at 90 degrees to each other on 1/2" centers. |
|
|
