Kenyon 3756 4-sheave Internal Gooseneck Assembly

Heavy-duty cast aluminum gooseneck assembly incorporates provisions for 4 internal lines. Two horizontally mounted sheaves on each side allow internal outhaul, topping lift, and reef lines to be led aft to winches or cleats on the side of the boom. Plastic sheaves handle up to 7/16" line. Includes SS combination Toggle/Tack/Reef Hook Assembly K-10345A. Toggle attaches to any Kenyon gooseneck bracket designed for 1 1/2" toggle and 3/8" vertical pin. Vertical pin, K-CP6-76, is not included. Unit has same length and cutback dimensions as standard K-43002 3-Sheave Gooseneck Assembly.
	Gooseneck Toggle/Tack Assembly w/ Reef Hooks: K-10345A: Used with the Kenyon E-section, 3550, and 3756 internal goosenecks, this combination Toggle/Tack/Reef Hook Assembly features 3 tack positions and includes 3/8" tack fastpin, K-10557. *Takes 3/8" vertical and* horizontal pins. Two reef hooks allow for ease of reefing from either side of the boom. Toggle portion is 1 1/2" high x 7/8" wide with 1" between pin centers. Unit (excluding Reef Hooks) is 4" high x 7/8" wide x 2 1/4" long. Attaches directly to any of the Kenyon SS Gooseneck Brackets designed for a 1 1/2" Toggle with 3/8" vertical pin, K-CP6-76.**
3756 4-Sheave Internal Gooseneck Assembly: K-11284: As *K-11284A, above, but without SS combination Toggle/Tack/Reef Hook Assembly K-10345A.*
3756 4-Sheave Gooseneck Casting Half - Port: K-11233P: 3756 4-Sheave Gooseneck Casting Half - Starboard: K-11233S: Replacement castings only for 3756 4–Sheave Internal Gooseneck Assembly, *K-11284.* Specify Port or Starboard.
*Sheave for 3756 4-Sheave Gooseneck: K-8850-B7:* Molded Nylon sheave with integral Bronze bushing is 1 7/8" OD x 35/64" (.540") wide x 7/16" ID.
*Sheave Spacer for 3756 4-Sheave Gooseneck: K-9014:* SS spacer is 7/16" OD x 5/16" ID x 9/16" long.
*Sheave Axle for 3756 4-Sheave Gooseneck: K-CP5-61:* SS Clevis pin is 5/16" x 1 15/16" long.

Your cart

Spars, Rigging, and Hardware for Sailboats