Pearson 385 - Isomat NG60 Mast

Isomat NG-60 Mast
Measurements (OD): 8.07" x 5.39" (205mm x 137mm)
Wall Thickness (minimum): .137" (3.5mm)
Weight/ft.: 4.03 lbs. Weight/M: 6.01 kg
Moments of inertia: Ixx = 26.43", Iyy = 12.73"
Moments of inertia: Ixx = 1100cm4, Iyy = 530cm4
Circumference: 22 1/8" (562mm)
Alloy: 6061-T6
Sail slides: 15/16" flat slides (A008M)
Common Mast usage: A variety of boats from 33' to 40'.

**** Pearson 385 Mast Assembly is IN Stock.

Pearson 385's were produced using the Isomat NG-60 Mast Section.
Factory original Parts used on the Isomat Mast for the Pearson 385 are listed here.
For additional data and Parts for this Mast, See Isomat NG-60 Mast Section.

Pearson 385 Mast Assembly - NG-60

Factory original Keel-stepped Pearson 385 Mast Assembly includes:

Tapered NG-60 x 51' 6" tube length with Clear Anodized finish.
Welded Masthead - NG2-1AC - NG2 Masthead Rig.
Welded Spreader Bases - BF4-35 @ 30' 6"
Exit Plate, Starboard - NG2-7S4 @ 19'
Exit Plate, Port - NG2-7S4 @ 15' 5"
Mainsail Gate - NG2-9K @ 16'
Gooseneck Bracket - NG2-11 @ 14' 1/2",
Winch Pads, side - (2) NG60-20 @ 11' 11 1/2",
Cleats - (2) NGC-8 @ 11'
Electrical Conduit - (2) - 1 piece to Spreaders, 1 piece to Masthead
For additional details on these Parts, and other Parts for this Mast, See Isomat NG-60 Mast Section.

BF4 Spreaders are Not Included. See BF-4 Spreaders.
NG-60 Mast Step is Not Included. See Isomat NG-60 Mast Section for options.
Boom is Not Included, but Gooseneck Bracket is compatible with Isomat NB-32, NB-40, NB-55 and, with minor modification, Sparcraft Booms - FB-220 and larger.

Your cart

Spars, Rigging, and Hardware for Sailboats