 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Isomat/ Sparcraft Spreaders |
|
|
|
|
| Isomat Spreader Sections feature an integral 'tail', so that the
Spreaders can be tapered at the
outboard ends without welding. Please Note that Early versions of Isomat
Spreaders had similar dimensions but had no
'tail' - all Spreaders were supplied with a cut and welded taper, and a welded tip.
Click on the appropriate Spreader size for details. |
| For replacement Spreaders and Parts,
determine which Spreader you have by measuring the Spreader Section. Click on individual Spreader Sections, below, to see hardware and Parts commonly used with those Sections. |
|
See also Isomat Masts & Components, and Sparcraft Masts & Components. And Isomat Booms & Components, and Sparcraft Booms & Components. |
Isomat Spreader Sections |
| Spreader Section |
Outside Dimensions (maximum - untapered end) Width x Height |
Internal Dimensions (maximum) |
Wall Thickness (minimum) | Weight (lbs./ft.) |
| BF-2 | 55mm x 19mm (2 3/16" x 3/4") |
40mm x 12.5mm (1 1/16" x 1/2") |
1.5mm | .469 |
| BF-3 | 74mm x 30mm (2 7/8" x 1 3/16") |
53mm x 22mm (2 1/16" x 7/8") |
2mm | .804 |
| BF-4 | 105mm x 35mm (4 1/8" x 1 3/8") |
71mm x 27mm (2 13/16" x 1 1/16") |
2mm | 1.206 |
| BF-5 | 154.5mm x 44mm (6" x 1 3/4") |
100mm x 35mm (3 15/16" x 1 3/8") |
2.5mm | 1.876 |
| BF-6 | 167mm x 53mm (6 9/16" x 2 1/16") |
113mm x 44mm (4 1/2" x 1 3/4") |
3.7mm | 2.278 |