Bronze Winch Stands for Coaming Mount

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com Ordering/Questions

Bronze Winch Stands - Coaming Mount

These Winch Stands are designed for use on boats with wood coamings. Winch Stands bolt through the coaming and through the deck to provide a strong, stable platform for mounting jib and genoa sheet winches, while also reinforcing the coaming. A second set is often used for spinnaker sheet winches.

Heavy Cast Bronze Winch Stands are drilled with coaming and deck mounting holes, winch mounting surface is undrilled for use with any winch brand. Due to the variety of deck and coaming thicknesses fasteners are not included.

Coaming Mounted Winch Stands

Bronze winch stands

Part #	Finish**	Winch mount fore & aft A	Winch mount athwartships B	Foot Length C	Height D	Angle� E	Fasteners	Fits Lewmar
SP-W798	Burnished	4 1/2"	4 1/4"	1"	4 7/8"	4 degrees	1/4"*	# 6
SP-W800	Burnished	5 1/8"	5 1/4"	3"	4 3/4"	3 degrees	5/16"	# 7
SP-W799	Burnished	6 5/8"	6 1/2"	4"	5 3/8"	1 degree	5/16"	# 10
SP-W850	Burnished	6"	5 3/4"	3 3/4"	6 1/8"	1 degree	5/16"	# 16
SP-W848	Burnished	6 1/2"	6 7/16"	4 1/8"	6 5/8"	1 degree	5/16"	# 30

* The SP-W798 fastens through the Deck with one (1) bolt, all others use two (2) bolts.
** Units are available in Polished Bronze (PB), and Chrome Plated (CP) finish on special order.

Your cart

Spars, Rigging, and Hardware for Sailboats