 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
T-Track Traveller Blocks |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
T-Track Traveller Blocks |
|
|
|
|
| Mainsheet Traveller Blocks for T-Track |
|
Before the advent of modern Traveller Systems with wheels and ball-bearings, many boats
(even the largest yachts) used T-Track (or Flat Track) as Traveller Track. These systems commonly
use
Adjustable Track Stops (listed below) to limit Slide travel, Slides are normally adjusted when the
mainsheet is slack.
T-Track Traveller Systems were still in common use on production boats through the 1980's, and are
still used on a variety of traditional designs.
T-Track Traveller Slides with integral Mainsheet Blocks are listed below. For plain T-Track Traveller Slides (without Blocks), See: Traveller Slides. See also, Track. In addition to those Slides listed here, other configurations are available on Special Order,
please forward details for a quote.
3/4" T-Track - Mainsheet Blocks
|
|
|
| Mainsheet Traveller Blocks for T-Track | ||
|
Mainsheet Traveller Blocks
for 3/4" T-Track US Standard 3/4" T-Track (and Flat Track) has a bearing surface that is 3/4" wide x 1/8" high. |
||
| Mainsheet Fiddle Block w/ Cam Cleat on 3/4" T-Track Slide: SK 2576X: | ||
|
Stainless Steel Schaefer 04 Mainsheet Fiddle Block with Cam Cleat is mounted on
a SS slide for 3/4" T-Track. Slide is 2 1/2" long, swivel block is mounted
with a spring to keep block upright in all conditions. Block is suitable
for line up to 3/8" (10mm), unit is (maximum) 5 3/4" high. As used on Cape
Dory 22, 25, and others.
|
|
|
|
Adjustable Stop w/ Screw Pin for 3/4" T-Track: Sch 74-46: Adjustable Stop for 3/4" T-Track has Screw Pin with 3/16" tip. Formed Stainless Steel slide stop is 1" long x 15/16" wide.
|
||
|
Adjustable Stop w/ Spring Pin for 3/4" T-Track: Sch 74-46SPX: Adjustable Stop for 3/4" T-Track has Spring Pin with 3/16" tip for quick and easy adjustment. Formed Stainless Steel slide stop is 1" long x 15/16" wide.
|
||
|
|
||
|
|
||
|
Mainsheet Traveller Blocks
for 1" T-Track US Standard 1" T-Track (and Flat Track) has a bearing surface that is 1" wide x 1/8" high. |
||
|
Mainsheet Single Block on 1" T-Track Slide: Sch 17-01X: Schaefer 05 Mainsheet Block is mounted on a lined SS slide for 1" T-Track. Slide is (maximum) 3 3/8" long x 1 3/8" wide and features plastic liners to reduce sliding friction. Block is mounted with a spring to keep block upright in all conditions, and is suitable for line up to 7/16" (12mm).
|
|
|
| Mainsheet Single Block w/ Becket on 1" T-Track Slide: Sch 17-02X: | ||
|
Schaefer 05 Mainsheet Block is mounted on a lined SS slide for 1"
T-Track. Slide is (maximum) 3 3/8" long x 1 3/8" wide and features plastic liners to reduce sliding
friction. Block is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 7/16" (12mm).
|
||
| Mainsheet Fiddle Block w/ Cam Cleat on 1" T-Track Slide: Sch 17-03X: | ||
|
Schaefer 05 Mainsheet Fiddle Block with Cam Cleat is mounted on a lined SS slide for 1"
T-Track. Slide is (maximum) 3 3/8" long x 1 3/8" wide and features plastic liners to reduce sliding
friction. Block features removable Cam Cleat and is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 7/16" (12mm).
|
||
| Mainsheet Fiddle Block w/ Becket & Cam Cleat on 1" T-Track Slide: Sch 17-04X: | ||
|
Schaefer 05 Mainsheet Fiddle Block with Becket and Cam Cleat is mounted on a lined SS slide for 1"
T-Track. Slide is (maximum) 3 3/8" long x 1 3/8" wide and features plastic liners to reduce sliding
friction. Block features removable Becket and is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 7/16" (12mm).
As used on Cape Dory 28, and others.
|
|
|
|
|
Replacement Liners for 1" x 3" Traveller Slide: Sch 171LP-3: | |
|
|
Replacement Liners for 3" Schaefer Traveller Slides for 1" T-Track. Black plastic liners are
(maximum)
3 1/4" long. Sold in pairs only.
|
|
|
|
Replacement Slide Ass'y for 1" x 3" Traveller Slide: Sch 17-04SAC: | |
|
|
Replacement Slide Assembly only as used in Sch 17-04X. Includes
spring and swivel assembly with welded yoke for attachment to Schaefer 05 Block with single bolt.
Slide is (maximum) 3 3/8" long x 1 3/8" wide and includes plastic liners.
|
|
|
Adjustable Stop w/ Screw Pin for 1" T-Track: Sch 74-48: Adjustable Stop for 1" T-Track has Screw Pin with 5/16" tip. Formed Stainless Steel slide stop is 1" long x 1 1/4" wide.
|
||
|
|
Replacement Screw Pin for Sch 1" Cars: Sch 171SP: Replacement Thumb Screw Pin for Sch 74-48 and other Schaefer Cars and Slides for 1" T-Track. SS Screw Pin has 7/8" knurled head with a 7/16-20 thread and a 1/4" tip. Screw is 1/2" long beneath the Head.
|
|
|
Adjustable Stop w/ Spring Pin for 1" T-Track: Sch 74-48SP: Adjustable Stop for 1" T-Track has Spring Pin with 3/16" tip for quick and easy adjustment. Formed Stainless Steel slide stop is 1" long x 1 1/4" wide.
|
||
|
|
||
|
Mainsheet Traveller Blocks
for 1 1/4" T-Track US Standard 1 1/4" T-Track (and Flat Track) has a bearing surface that is 1 1/4" wide x 3/16" high. |
||
| Mainsheet Single Block on 1 1/4" T-Track Slide: Sch 17-21X: | ||
|
Schaefer 07 Mainsheet Single Block is mounted on a lined SS slide for 1 1/4"
T-Track. Slide is (maximum) 4 3/8" long x 1 5/8" wide and features plastic liners to reduce sliding
friction. Block is mounted with a spring to keep block
upright in all conditions, and is suitable for line up to 1/2" (12mm).
New '81
|
||
| Mainsheet Single Block w/ Becket on 1 1/4" T-Track Slide: Sch 17-22X: | ||
|
Schaefer 07 Mainsheet Single Block with Becket is mounted on a lined SS slide for 1 1/4"
T-Track. Slide is (maximum) 4 3/8" long x 1 5/8" wide and features plastic liners to reduce sliding
friction. Block features removable Becket and is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 1/2" (12mm).
|
||
| Mainsheet Fiddle Block w/ Cam Cleat on 1 1/4" T-Track Slide: Sch 17-23X: | ||
|
Schaefer 07 Mainsheet Fiddle Block with Cam Cleat is mounted on a lined SS slide for 1 1/4"
T-Track. Slide is (maximum) 4 3/8" long x 1 5/8" wide and features plastic liners to reduce sliding
friction. Block features removable Cam Cleat and is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 1/2" (12mm).
As used on a variety of Pearsons', and others.
|
||
| Mainsheet Fiddle Block w/ Becket & Cam Cleat on 1 1/4" T-Track Slide: Sch 17-24X: | ||
|
Schaefer 07 Mainsheet Fiddle Block with Becket and Cam Cleat is mounted on a lined SS slide for 1
1/4"
T-Track. Slide is (maximum) 4 3/8" long x 1 5/8" wide and features plastic liners to reduce sliding
friction. Block features removable Becket and is mounted with a spring to keep block
upright in all conditions. Block is suitable for line up to 1/2" (12mm).
As used on a variety of Pearsons', and others.
SK 4456X PY12-1306
|
|
|
|
|
Replacement Liners for 1 1/4" x 4" Traveller Slide: Sch 172LP-4: | |
|
|
Replacement Liners for 4" Schaefer Traveller Slides for 1 1/4" T-Track. Black plastic liners are
(maximum) 4 1/4" long. Sold in pairs only.
|
|
|
|
Replacement Slide Ass'y for 1 1/4" x 4" Traveller Slide: Sch 17-24SAC: | |
|
|
Replacement Slide Assembly only as used in Sch 17-24X. Includes
spring and swivel assembly with welded yoke for attachment to Schaefer 07 Block with single bolt.
Slide is (maximum) 4 3/8" long x 1 5/8" wide and includes plastic liners.
|
|
|
Adjustable Stop w/ Screw Pin for 1 1/4" T-Track: Sch 74-51: Adjustable Stop for 1 1/4" T-Track has 3/8" Screw Pin. Formed Stainless Steel slide stop is 1 1/4" long x 1 9/16" wide.
|
||
|
|
Replacement Screw Pin for Sch 1 1/4" Cars: Sch 172SP: Replacement Thumb Screw Pin for Sch 74-51 and other Schaefer Cars and Slides for 1 1/4" T-Track. SS Screw Pin has 7/8" knurled head with a 7/16-20 thread and a 3/8" tip. Screw is 9/16" long beneath the Head.
|
|
|
Adjustable Stop w/ Spring Pin for 1 1/4" T-Track: Sch 74-50X: Adjustable Stop for 1 1/4" T-Track has 3/8" Spring Pin for quick and easy adjustment. Formed Stainless Steel slide stop is 1 1/4" long x 1 9/16" wide. |
||