 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
SS Rail Bases & Hardware - 1" |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
SS Rail Bases & Hardware - 1" |
|
|
|
|
| SS Rail Bases & Hardware for 1" OD Tube |
|
In addition to a wide variety of Stanchions and
Stanchion Bases, Rig-Rite stocks Rail Bases, used
on Bow and Stern Rails, and related Hardware and Stainless Steel Tube.
In addition to those Rail Fittings listed here, Rig-Rite also has the ability to manufacture
other Rail Fittings on a Custom basis. If a Rail Fitting you require is not listed here, please
contact us with a sketch and complete dimensions, including base footprint, hole spacing, and
angles.
|
|
|
| Round SS Rail Bases |
|
|
|
Round SS Rail Bases These Round Rail Bases are Cast in 316 SS for maximum corrosion resistance. |
|
|
Round Rail Base for 1" OD Tube - 90�: SB RBR1-90�: Round Rail Base for 1" OD Tube - 60�: SB RBR1-60�: Round Rail Base for 1" OD Tube - 45�: SB RBR1-45�: Round Rail Base for 1" OD Tube - 30�: SB RBR1-30�: Round Cast SS Rail Base for 1" OD Tube is available in a variety of angles. Cast 316 SS Base is 2 13/16" diameter and attaches to Deck with (3) 1/4" FH screws. Unit includes (2) 1/4"-28 set screws to clamp Rail Tube. Note: As a truly secure installation requires positive engagement of the Rail Tube, we recommend that you drill a clearance hole in the Rail, and substitute a RH screw (included) for one of the set screws. |
|
|
|
|
|
|
|
|
Rectangular SS Rail Bases These Round Rail Bases are Cast in 316 SS for maximum corrosion resistance. |
|
|
Rectangular Rail Base for 1" OD Tube - 90�: SB RBS1-90�: Rectangular Rail Base for 1" OD Tube - 60�: SB RBS1-60�: Rectangular Rail Base for 1" OD Tube - 45�: SB RBS1-45�: Rectangular Rail Base for 1" OD Tube - 30�: SB RBS1-30�: Rectangular Cast 316 SS Rail Base for 1" OD Tube is available in a variety of angles. Base is 3 1/4" long x 1 7/8" wide and attaches to Deck with (4) 1/4" FH screws on 2 5/8" x 1 1/8" centers (30� unit attaches w/ 3 screws). Unit includes (2) 1/4"-28 set screws to clamp Rail Tube. Note: As a truly secure installation requires positive engagement of the Rail Tube, we recommend that you drill a clearance hole in the Rail, and substitute a RH screw (included) for one of the set screws. |
|
|
|
|
|
|
SS Rail Connectors These SS Rail Elbows and T's are Cast in 316 SS for maximum corrosion resistance. Other configurations of Elbows and T's are available, please contact us with your requirements. |
|
|
Rail Elbow for 1" OD Tube - 90�: SB RBE1-90�: Cast 316 SS Rail Elbow for 1" OD Tube is 2" long x 2" high. Unit includes (2) 1/4"-28 set screws to secure Rails.
|
|
|
Bow Rail Elbow for 1" OD Tube - 110�: SB RBE1-110�: Bow Rail Elbow for 1" OD Tube - 125�: SB RBE1-125�: Commonly used as the center piece of an assembled Bow Rail, these cast 316 SS Rail Elbows for 1" OD Tube are 4" long. Units include (4) 1/4"-28 set screws to secure Rails and feature a 1/2" hole in top for optional flagstaff.
|
|
|
|
|
|
Rail Standard T-fitting for 1" OD Tube - 90�: SB RBT1-90�: Cast 316 SS Rail T-fitting for 1" OD Tube is 2 1/8" long x 2 1/8" high. Unit includes (3) 1/4"-28 set screws to secure Rails.
|
|
|
Rail Standard T-fitting for 1" OD Tube - 60�: SB RBT1-60�: Cast 316 SS Rail T-fitting for 1" OD Tube is 2 3/8" long x 2 3/8" high. Unit includes (4) 1/4"-28 set screws to secure Rails.
|
|
|
|
|
|
1" OD SS Polished Tube Highly polished 1" OD Standard Stanchion and Rail Tube. |
|
|
1" OD Polished SS Tube x 2' long: SST 1-065P-2': 1" OD Polished SS Tube x __ long: SST 1-065P-__: Highly polished 1" OD x .065" wall standard Stanchion and Rail Tube is available in 2 foot lengths, and any other length up to 20 feet, please specify. |
|