Goiot Ports & Port Parts

Goiot Port Parts
Common replacement parts for Goiot Ports are listed below.
For parts not listed please contact us with measurements and details.

Tradition Port Parts
Cristal Port Parts
Opal Port Parts
Evolution Port Parts

Tradition Port Parts
Replacement parts for Goiot Tradition Cast Aluminum Ports are listed below. Note that some of these items have been used on Goiot Original Hatches.
For parts not listed please contact us with measurements and details.

Female Knob for 8mm Stud: Goi PT-KF8:
Black plastic Knob is threaded for standard 8mm Dog stud. Used on a variety of Goiot Tradition Ports and Hatches, fluted Knob is 1 3/4" (44mm) OD x 1" high, threaded for a 8mm stud. 9224/95344-1

Dog Screw - 8mm: Goi PT-DS8:
Dog Screw has 8mm thread with an 8mm Pin hole. Aluminum Dog Screw is (maximum) 44mm (1 3/4") long. Used on Goiot Tradition Ports. 9130/99468-1

Dog Screw Pin / Hinge Pin - 8mm: Goi PT-HP8:
Used as Dog Screw Pin and Port Hinge Axle, Black plastic self-locking Hinge Pin is 8mm x 38mm long (5/16" x 1 1/2"). Used on Goiot Tradition Ports. 8304/95343-1

New-style Hinge Pin Ass'y - 10mm SS: Goi PT-HPA-10:
New-style 10mm self-locking Hinge Pin Assembly is designed for permanence and allows hinge friction to be increased by tightening the nut. Includes (2) SS Flange Bushings, spacer, locknut and 5mm x 40mm screw. Used on newer Goiot Tradition Ports up to 34.18, and the 34.15O Oval Port. 105715/99713-1

Rubber Hold-open Knob w/ washer: Goi PT-KR:
Rubber Hold-open Knob is mounted on Cabin wall or ceiling and used to hold Ports open. Unit is 38mm OD x 20mm high and is mounted with (1) 5mm screw. Rubber base washer (34mm OD) is included. Used with Round and Larger Goiot Tradition Ports.

Replacement Acrylic Lens, Fly Screen & Gasket for Tradition Ports

Port # Lens Size Notes Lens (Blue) Lens (Grey) Fly Screen Gasket

24.11 240x110mm Goi 99379 Goi 93992 Goi PT-G8

34.14 339x135mm Dead light Option Goi 99454 Goi 99454G Goi 105721

34.18 340x180mm .6 DL Option Goi 99457 Goi 99705

44.22 434x216mm

54.32 512x291mm Goi 99372 Goi HT-GL

34.15O 335x135mm Oval, .6 DL Opt Goi 99240 Goi 99240G Goi PT-G8

13.13C 120mm Round

18.18C 165mm Round, .6 DL Opt

21.21C 200mm 185 Round, .6 DL Opt Goi 99375G

Gasket for Goiot Tradition series Ports, per ft.: Goi PT-G8:
Black Neoprene Gasket is used on all but the largest Goiot Tradition series Ports. Round profile Gasket is 8mm (5/16") OD, and is sold by the foot. R8 95667

Gasket for Large Goiot Tradition Port, per ft.: Goi HT-GL:
Black Neoprene Gasket is only used on the Goiot 54.32 Port, and the Larger Tradition Hatches. Round profile Gasket is 10mm (3/8") OD, and is sold by the foot. R10 95665

Gasket Glue for Goiot Hatches & Ports: Goi PT-GGlue:
Special Gasket Glue is used for Gasket attachment on all Goiot Hatches and Ports. Enough Glue is included for re-gasketing 2 mid-size Hatches or 4-5 Ports. gl 101714

Cristal Port Parts
Replacement parts for Goiot Cristal Cast Aluminum Ports are listed below.
For parts not listed please contact us with measurements and details.

Cristal Port Handle Ass'y: Goi PC-HA:
Gray plastic Handle Assembly is used on all Goiot Cristal Ports. Assembly includes Handle (Goi PC-H), Aluminum Screw Insert and screw.

Cristal Port Handle: Goi PC-H:
Gray plastic Handle is used on all Goiot Cristal Ports. Handle is 68mm (1 11/16") long x (maximum) 21mm (13/16") wide. Unit is marked P1400. 95332-1

Cristal Port Handle - Screw Insert: Goi PC-HSI:
Aluminum Screw Insert is used on all Goiot Cristal Port Handles to adapt Handle to 6mm FH screw. 99254

Cristal Port Handle Seat Latch: Goi PC-L:
Gray plastic Handle Seat Ramp (Latch) is used on all Goiot Cristal Ports. Ribbed Handle Seat is 40mm (1 9/16") wide x 31mm (1 1/4") deep and attaches to Port frame with (2) 6mm FH screws. Unit is marked P1401. 95331-1

Cristal Port Hinge - Left: Goi PC-Hinge-L:
Cristal Port Hinge - Right: Goi PC-Hinge-R:
Anodized Aluminum Hinges (L&R) are used on all Goiot Cristal Ports. Hinge bracket is 48mm long x 15mm high and attaches to Port frame with (2) 5mm FH screws. Specify Left or Right as viewed from inside. 99247/99246

Hinge Pin Ass'y (Friction Set) - Pair: Goi HC-AS-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Unit is 50mm long, and includes Special Allen Head Nut, polymer spacer, and 5mm x 35mm screw. Set (2 pcs.) is used on Goiot Cristal Ports. 101706

Replacement Acrylic Lens, Fly Screen & Gasket for Cristal Ports

Port # Lens Size Notes Lens (Blue) Lens (Grey) Fly Screen Gasket

23.10R 240x110mm Goi 99489 Goi PC-G

33.13R 320x120mm Goi 99264 Goi 99264G

43.18R 420x170mm Goi 99548

40.20R Nautor Special Goi 99533

40.24R Nautor Special Goi 99535

33.13O 320x120mm Oval Goi 99250 Goi 99509

39.05O 405x65mm Oval

43.18O 420x170mm Oval Goi 99546

Gasket for Goiot Cristal series Ports, per ft.: Goi PC-G:
Black Neoprene Gasket is used on all Goiot Cristal series Ports. Round-top Gasket with flat bottom is 8mm wide x 7mm high, and is sold by the foot. RT8 95663

Opal Port Parts
Replacement parts for Goiot Opal Extruded Aluminum Ports are listed below.
For parts not listed please contact us with measurements and details.

Opal Port Handle Assembly: Goi PO-HA:
Gray plastic Lever-action Handle Assembly is used on all Goiot Opal Ports, T04 Ports use 2 Handles and Hinges. Unit is 180mm long and screws directly to Lens, screws are included. 115517

Opal Port Handle: Goi PO-H:
Gray plastic Lever-action Handle (movable portion only) is used on all Goiot Opal Ports, T04 Ports use 2 Handles and Hinges. Unit is 120mm long and attaches to Handle Base with 5mm SS Pin. 115

Opal Port Hinge: Goi PO-Hinge:
Gray plastic Hinge Assembly is used on all Goiot Opal Ports, T04 Ports use 2 Handles and Hinges. Unit is 128mm long and screws directly to Lens, screws are included.

Replacement Acrylic Lens, Fly Screen & Gasket for Opal Ports

Port # Lens Size (max.) Notes Lens (Blue) Lens (Grey) Fly Screen Gasket

T00 258x125mm Goi PO-G

T01 Goi 106620

T03 Goi 115854

T04 583x141mm Goi 115334 Goi 115335 Goi 106621

T05 Goi 115848

T50 Goi 106619

T32O Oval Goi 115516 Goi 106618

Gasket for Goiot Opal series Ports, per ft.: Goi PO-G:
Black Extruded Gasket is used on all Goiot Opal series Ports. Wide Triangular Gasket with flat bottom is 24mm wide x 14mm high, and is sold by the foot. WT 115508

Evolution Port Parts
Replacement parts for Goiot Evolution Extruded Aluminum Ports are listed below.
For parts not listed please contact us with measurements and details.

Evolution Port Handle Ass'y: Goi PE-HA:
Gray plastic Handle Assembly is used on all Goiot Evolution Ports. Assembly includes Ribbed Handle (Goi PE-H), Outside Cap, O-ring and screw. 95336

Evolution Port Handle: Goi PE-H:
Gray plastic Handle is used on all Goiot Evolution Ports. Ribbed Handle has internal key, and is 62mm (1 7/16") long x (maximum) 20mm (3/4") wide and attaches to Port with (1) 6mm FH screw. Unit is marked P1595. 95336-1

Evolution Port Handle Seat Latch: Goi PE-L:
Gray plastic Handle Seat Ramp (Latch) is used on all Goiot Evolution Ports. Handle Seat is 40mm (1 9/16") wide x (maximum) 25mm (1") deep and attaches to Port frame with (2) 6mm FH screws. Unit is marked P1594. 95335-1

Evolution Port Hinge Set: Goi PE-HingeSet:
Gray plastic Hinge Set as used on all Goiot Evolution Ports. Each hinge assembly (2 included) includes all (4) plastic parts, O-ring and (5) screws. 99488

Replacement Acrylic Lens, Fly Screen & Gasket for Evolution Ports
Acrylic Lenses for true Rectangular (90 deg. corners) Goiot Evolution Ports are also available, Call with measurements.

Port # Lens Size Notes Lens (Blue) Lens (Grey) Fly Screen Gasket

26.11R 274x124mm Goi 99274 Goi 99421 Goi 99568 Goi PE-G

33.13R 344x144mm Goi 99269 Goi 99511

58.13R 595x144mm Goi 99277 Goi 99622

33.10O 344x109mm Oval Goi 99578

33.13O 344x144mm Oval Goi 99280 Goi 99509

Gasket for Goiot Evolution series Ports, per ft.: Goi PE-G:
Black Neoprene Gasket is used on all Goiot Evolution series Ports. Round-top Gasket with flat bottom is adhesive-backed, is 8mm wide x 8mm high, and is sold by the foot. No additional Glue is required. RT8A 95664

Your cart

Spars, Rigging, and Hardware for Sailboats

Goiot Port Parts Goiot Ports and Hatches, made in France, are found on a variety of Yachts built around the world. Their original Cast Aluminum, now "Tradition" series, are among the most respected anywhere. In addition to the Tradition series, Goiot manufactures a wide range of Ports including the Cristal, Opal, and Evolution series in a variety of finishes.


Goiot Ports Goiot Ports are available in the original cast Tradition series, as well as the Cristal, Opal, and Evolution series. For replacement Ports please contact us with Outside (maximum) Dimensions of the interior Finishing Ring and details.