Goiot Hatches & Hatch Parts

Goiot Hatch Parts Goiot Hatches and Ports, made in France, are found on a variety of Yachts built around the world.


Goiot Hatches Goiot manufactures a wide selection of Aluminum Hatches in a variety of configurations to suit any application. Current production includes Tradition, Cristal, Opal, and Integration series, as well as Escape Hatches and Flush-mount configurations. For complete replacement Hatches See Goiot Hatches.

Goiot Hatch Parts
Commonly requested replacement parts for a variety of Goiot Hatches are listed below.
The easiest way to determine which Hatches you have, is by identifying the Handles.
For parts not listed please contact us with measurements and details.

Tradition Hatch Parts
Cristal & Integration Hatch Parts
Opal Hatch Parts
Evolution Hatch Parts

Tradition Hatch Parts
Replacement parts for Goiot Original Hatches, Tradition & Tradition Escape Hatches are listed below. Acrylic Lenses for Goiot Original Hatches are listed separately.
For parts not listed please contact us with measurements and details.

Handle Ass'y, Tradition Hatch - Left Complete: Goi HT-HLA:
Left side Black plastic Handle Assembly includes Inside Handle and Top Cap with O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot cast Tradition series. 9494A

Handle, Tradition Hatch - Left: Goi HT-HL:
Left side Black plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot cast Tradition series. 9494

Handle Ass'y, Tradition Hatch - Right Complete: Goi HT-HRA:
Right side Black plastic Handle Assembly includes Inside Handle and Top Cap with O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot cast Tradition series. 9495A

Handle, Tradition - Right: Goi HT-HR:
Right side Black plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot cast Tradition series. 9495

Top Cap for Tradition Hatch Handle: Goi HT-TC:
Top Cap for Hatch Handle fits on the outside of Hatch. Black plastic Top Cap has square stud that mates with Handle socket. Unit is 35mm (1 3/8") OD x 44mm (1 3/4" long) with 19mm OD (maximum) stud and includes O-ring. Used on Goiot Tradition series. 95347 / 9492

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Evolution, Cristal, and Integration series Hatches, O-rings are sold in packs of four (4) pieces.

Outside Handle for Tradition Hatch: Goi HT-HOS:
Optional Outside Handle allows opening Hatch from the outside. Black plastic Handle replaces Top Cap and has square stud that mates with inside Handle. Unit is (maximum) 35mm (1 3/8") wide and includes O-ring. Used on Goiot cast Tradition series. 9490

Handle Ass'y, Tradition Escape Hatch - Left: Goi HT-HLA-A:
Left side Aluminum Handle Assembly for Goiot cast Tradition Escape Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Outside Handle is 110mm (4 5/16") long, Inside Handle is 122mm (4 7/8") long x 45mm (1 3/4") wide. Aluminum Handles are standard on Escape Hatches, but are also compatible with Standard Tradition Hatches.

Handle Ass'y, Tradition Escape Hatch - Right: Goi HT-HRA-A:
Right side Aluminum Handle Assembly for Goiot cast Tradition Escape Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Outside Handle is 110mm (4 5/16") long, Inside Handle is 122mm (4 7/8") long x 45mm (1 3/4") wide. Aluminum Handles are standard on Escape Hatches, but are also compatible with Standard Tradition Hatches.

Handle Ass'y Complete, Tradition 80.80 Hatch: Goi HT-HA-80:
Complete Handle Assembly for Goiot 80.80 Tradition Hatch includes Aluminum Inside and Outside Handles with SS Shaft and attachment knuckle. Assembly is 223mm (9 1/8") long. 100863

Hatch Handle Seat for Corner, Tradition Series: Goi HT-HSC:
Cast Aluminum Seat for Hatch Handle attaches to Hatch frame corner with (2) 3/16" (5mm) rivets (included). Aluminum Handle Seat is 69mm (2 3/4") long x (maximum) 18mm (3/4") wide. Two (2) each used on all Goiot Tradition series Hatches with 2 Handles. 101711-1

Hatch Handle Seat, Tradition 34.20: Goi HT-HSF-1:
Black plastic Seat for Hatch Handle attaches to Hatch frame with (2) 3/16" (5mm) rivets (included). Black plastic Handle Seat is 76mm (3") long x (maximum) 18mm (3/4") wide. Used on Goi HT34.20 Tradition Hatch with single Handle. 93476-1

Friction Ring Set for Spring, Tradition: Goi HT-FR-3S:
Heavy SS Tab Washer and Black plastic washers (Friction Rings) are used to increase Spring tension that keeps Hatch open. Rarely does a Spring need replacing, but Spring tension decreases as these Rings wear. Set includes (2) Friction Rings Goi HT-FR, and (1) Goi HT-TW SS Tapered Tab washer. 121706

Friction Ring for Spring - 4-pack: Goi HT-FR-4:
Heavy Black plastic washers (Friction Rings) are used to increase Spring tension that keeps Hatch open. Rarely does a Spring need replacing, but Spring tension decreases as these Rings wear. Used on Goiot Tradition and Cristal Hatches, Friction Rings are 27mm OD x 12mm ID and are sold in packs of four (4) pieces. 95346/105743

SS Tab Washer: Goi HT-TW:
Long Tapered SS Tapered Tab Washer is used against the Hatch Spring. Used on Goiot Tradition Hatches, SS washer is 27mm OD x 12mm ID x 41mm long (at Tab).

Dog Screw - 8mm: Goi PT-DS8:
Dog Screw has 8mm thread with an 8mm cross hole. Aluminum Dog Screw is (maximum) 44mm (1 3/4") long. Used on Goiot original Tradition Hatches. 9130

Dog Screw for 2-way Hatch - 8mm: Goi HT-DS8-2:
Dog Screw has 8mm thread with an 8mm x 26mm (1") cross-pin. Aluminum Dog Screw is (maximum) 59mm (1 3/4") long. Used only with Goiot Tradition Two-way opening Hatches. 9131E

Female Knob for 8mm Stud: Goi PT-KF8:
Black plastic Knob Nut is threaded for standard 8mm Dog stud. Used on a variety of Goiot Tradition Ports and Hatches, fluted Knob is 1 3/4" (44mm) OD x 1" high, threaded for a 8mm stud. 9224

Male Dog Screw Knob w/ 8mm Screw: Goi HT-KM8:
Black plastic Dog Screw Knob has integral 8mm threaded Aluminum screw. Used on some Goiot Tradition and Cristal Hatches, fluted Knob is 1 3/4" (44mm) OD x 1" high, 8mm screw is 13mm (1/2") long. 9225

Hinge Pin - 10mm: Goi HT-HP10:
Black plastic self-locking Hinge Pin is 10mm x 36mm long (3/8" x 1 7/16"). Used on a variety of Goiot Tradition Hatches. 9290

Stay Arm Set for 50.50.2 - 2-Way Hatch: Goi HT-SAS-50:
Complete Stay Arm Set for 50.50.2 Two-way opening Tradition Hatch includes (2 ea.) Cast Arm, Piston Rod, HT-KM8 Dog Screw and (4) special 6mm screws w/ 8mm shaft. 101694

Stay Arm Piston for 50.50.2 - 2-Way Hatch: Goi HT-SAP-50:
Stay Arm Piston w/ Flat, 50.50.2 - 2-Way Hatch: Goi HT-SAP-50F:

Aluminum Piston Rod only for 50.50.2 Two-way opening Tradition Hatch Stay Arm is 14mm OD x 345mm (13 1/2") long. F version has milled Flat (310mm Long) on 1 side. 101155/101152/P9128

Stay Arm Casting for 2-Way Hatch - Left: Goi HT-SAC-L:
Stay Arm Casting for 2-Way Hatch - Right: Goi HT-SAC-R:
Casting only for Two-way opening Tradition Hatch Stay Arm is used with Telescopic Aluminum Piston Rod, below, to allow Hatch support. Cast Arm is 210mm (8 1/4") long and is threaded for Goi HT-KM8 Dog Knob. Used with Goiot Tradition Two-way opening Hatches. 101161/101160

Stay Arm Set for 62.62.2 - 2-Way Hatch: Goi HT-SAS-62:
Complete Stay Arm Set for 62.62.2 Two-way opening Tradition Hatch includes (2 ea.) Cast Arm, Piston Rod, HT-KM8 Dog Screw and (4) special 6mm screws w/ 8mm shaft. 101696

Stay Arm Piston for 62.62.2 - 2-Way Hatch: Goi HT-SAP-62:
Stay Arm Piston w/ Flat, 62.62.2 - 2-Way Hatch: Goi HT-SAP-62F:

Aluminum Piston Rod for 62.62.2 Two-way opening Tradition Hatch Stay Arm is 14mm OD x 395mm (15 1/2") long. F version has milled Flat (370mm Long) on 1 side. Also used on 80.80 Tradition Hatch. 101154/101153

Stay Arm Piston for Old-Style Hatch: Goi HT-SAP-X:
Aluminum Piston Rod for Old-Style 45.32 and 50.37 Tradition Hatch Stay Arms is 10mm OD x 232mm (9 3/16") long. 101156X/P9129

Hinge Base for 34.20 Hatch, L=180mm: Goi HT-HB34.20:
Hinge Base for 45.32 Hatch, L=345mm: Goi HT-HB45.32:
Hinge Base for 50.37 Hatch, L=372mm: Goi HT-HB50.37:
Hinge Base for 50.50 Hatch, L=372mm: Goi HT-HB50.50:
Hinge Base for 62.62 Hatch, L=510mm: Goi HT-HB62.62:
Hatch Hinge Base bolts to Hatch Frame and connects to Hatch Lid. Extruded Aluminum Hinge Base is drilled for Hinge Axle and has milled cut-out for Hatch Spring. L = maximum length of Hinge Base.

Replacement Acrylic Lens, Fly Screen & Gasket for Tradition Hatches
* For Replacement Gasket and Lenses for Original Hatches, See Goiot Original Hatches.

Hatch # Lens Size Notes Lens (Blue) Lens (Grey) Lens (Blue)
w/ Vent Hole Fly Screen Gasket

34.20 351x207mm Goi 101200 Goi 101200G Goi HT-GS

45.32 456x326mm Goi 101174 Goi 101174G Goi 101454 Goi 93462

50.37 506x376mm Goi 101175 Goi 101175G Goi 93464

50.50 506x506mm Goi 101176 Goi 101176G Goi 101463 Goi 93468

62.62 626x626mm Goi 101177 Goi 101177G Goi 101469 Goi 93473

62.62.6 525x525mm Sliding Hatch Goi 101187 Goi 101187G

72.72.6 727x727mm Sliding Hatch Goi 101195 Goi 101195G

80.80 835x835mm Goi 101145 Goi 101145G Goi HT-GL

50.50.2 523x523mm 2-Way Hatch Goi 101143 Goi 101143G

62.62.2 645x645mm 2-Way Hatch Goi 101144 Goi 101144G

Gasket for Small Goiot Tradition Hatches, per ft.: Goi HT-GS:
Black Neoprene Gasket is used on all Goiot Tradition Cast Hatches (including Tradition Escape and Sliding Hatches), except for the Two-way opening, and the Largest (835mm (32 7/8") square glass size) Cast Hatch. Trapezoidal profile Gasket has 14mm wide Base, is 12mm wide at the top x 10mm high, and is sold by the foot. T 95661

Gasket for Large Goiot Tradition Hatches, per ft.: Goi HT-GL:
Black Neoprene Gasket is only used on the Goiot Two-way opening, and the Largest Tradition Hatch, Goi HT80.80 (835mm (32 7/8") square glass size). Round profile Gasket is 10mm (3/8") OD, and is sold by the foot. R10 95665

Gasket Glue for Goiot Hatches & Ports: Goi PT-GGlue:
Special Gasket Glue is used for Gasket attachment on all Goiot Hatches and Ports. Enough Glue is included for re-gasketing 2 mid-size Hatches or 4-5 Ports. gl 101714

Cristal & Integration Hatch Parts
Replacement parts for Goiot Cristal, Cristal Escape and Integration Hatches are listed below. Parts used only on Goiot Integration Hatches are listed separately, See: Integration Hatch Parts.

Handle Ass'y Large, Cristal & Integration Hatch - Left Complete: Goi HC-HLA:

Left side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Cristal and Integration series.

Handle Large, Cristal & Integration Hatch - Left: Goi HC-HL:

Left side Gray plastic Inside Handle is 5 1/8" (130mm) long, Used on Goiot Cristal and Integration series.

Handle Ass'y Large, Cristal & Integration Hatch - Right Complete: Goi HC-HRA:

Right side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Cristal and Integration series.

Handle Large, Cristal & Integration Hatch - Right: Goi HC-HR:

Right side Gray plastic Inside Handle is 5 1/8" (130mm) long, Used on Goiot Cristal and Integration series.

Inside Cap for Large Handle, Cristal & Integration: Goi HC-HC:

Inside Cap for Large Handles. Gray plastic Cap is 42mm (1 5/8") diameter, Used on Goiot Cristal and Integration series.

Top Cap for Hatch Handle - Cristal, Integration, Evolution: Goi HC-TC:

Top Cap for Hatch Handle fits on the outside of Hatch. Gray plastic Top Cap has square stud that mates with Handle socket. Unit is 40mm (1 5/8") OD x 44mm (1 3/4" long) and includes O-ring. Used on Goiot Cristal, Integration, and Evolution series.

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Cristal, Integration, and Evolution series Hatches, O-rings are sold in packs of four (4) pieces.

Outside Handle for Cristal, Integration, Evolution Hatch: Goi HC-HOS:

Optional Outside Handle allows opening Hatch from the outside. Gray plastic Handle replaces Top Cap and has square stud that mates with inside Handle. Unit is (maximum) 42mm (1 5/8") wide x 96mm (3 3/4") long and includes O-ring. Used on Goiot Cristal, Integration, and Evolution series.

Small Handle Ass'y for Cristal Hatch: Goi HC-HSA:
Small Gray plastic Handle Assembly is used on all Rectangular Cristal Hatches. Assembly includes Handle (Goi HC-HS), Aluminum Screw Insert and screw.

Small Handle for Cristal Hatch: Goi HC-HS:
Small Gray plastic Handle used on Rectangular Cristal Hatches. Unit is (maximum) 35mm (1 3/8") wide x 66mm (2 5/8") long with a 12mm ID. Unit is marked P1371. 95530

Small Hatch Handle - Screw Insert: Goi HC-HSI:
Aluminum Screw Insert is used with Small Cristal Hatch Handle to adapt Handle to 8mm FH screw. 99054

Aluminum Handle Ass'y, Cristal Hatch - Left: Goi HC-HA-L:
Left side Aluminum Handle Assembly for Goiot Cristal Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Outside Handle is 110mm (4 5/16") long, Inside Handle is 110mm (4 1/4") long x 65mm (2 1/2") wide. Aluminum Handles are standard on Escape Hatches, but are also compatible with Standard Cristal Hatches.

Aluminum Handle Ass'y, Cristal Hatch - Right: Goi HC-HA-R:
Right side Aluminum Handle Assembly for Goiot Cristal Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Outside Handle is 110mm (4 5/16") long, Inside Handle is 110mm (4 1/4") long x 65mm (2 1/2") wide. Aluminum Handles are standard on Escape Hatches, but are also compatible with other Cristal Hatches.

Hinge Pin Ass'y (Friction Set) - Small Pair: Goi HC-AS-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Unit is 50mm long, and includes Special Allen Head Nut, polymer spacer, and 5mm x 35mm screw. Set (2 pcs.) is used on Goiot Cristal and Evolution Ports, and Smaller Cristal and Evolution Hatches. Fits Goiot Cristal Hatches # 24.19, 24.24, 35.21, 36.14, 36.19, 36.24, 49.19, & 49.24 and Evolution Hatches # 23.23 & 32.18. 101706

Hinge Pin Ass'y (Friction Set) - Large Pair: Goi HC-AL-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Polymer spacer is 43mm long x 16mm diameter, unit includes 6mm x 50mm screw, washers and Locknut. Set (2 pcs.) is used on Larger Goiot Cristal and Evolution Hatches. Fits Cristal Hatches # 42.42, 44.31, 44.44, 44C, & 49.36, and Evolution Hatches # 23.23 & 32.18. 101708

Friction Ring Set for Spring - XLarge Hatch: Goi HC-FRSet:
Heavy SS Tab Washers and Black plastic washers (Friction Rings) are used to increase Spring tension that keeps Hatch open. Rarely does a Spring need replacing, but Spring tension decreases as these Rings wear. Friction Rings are 27mm OD x 12mm ID and are sold in packs of four (4) each of the SS and plastic washers. Used on Cristal Hatches # 49.49, & 61.61. 121707

Friction Ring Set for Spring - 4-pack: Goi HT-FR-4:
Heavy Black plastic washers (Friction Rings) are used to increase Spring tension that keeps Hatch open. Rarely does a Spring need replacing, but Spring tension decreases as these Rings wear. Used on Goiot Tradition and Cristal Hatches, Friction Rings are 27mm OD x 12mm ID and are sold in packs of four (4) pieces. 95346/105743

SS Tab Washer: Goi HC-TW:
SS Tab Washer is used against the Hatch Spring. Used on Goiot Cristal Hatches, SS washer is 27mm OD x 12mm ID x 35mm long (at Tab). 95053

Stay Arm Piston w/ Flat for Cristal 79.79 Hatch: Goi HC-SAP:
Aluminum Piston Rod only for 79.79 Cristal Hatch Stay Arm is 14mm OD x 145mm (5 3/4") long. 100972?/P1528

Replacement Acrylic Lens, Fly Screen & Gasket for Cristal Hatches

Hatch # Lens Size Lens (Blue) Lens (Grey) Lens (Blue)
w/ Vent Hole Fly Screen Gasket

24.19 - T01 233x183mm Goi 100927 Goi 101508X Goi HC-GS

24.24 - T10 233x233mm Goi 100924 Goi 101261 Goi 101514

35.21 - T20 319x174mm Goi 101127 Goi 101127G Goi 101558

36.14 357x133mm Goi 100928

36.19 357x183mm Goi 100926

36.24 - T24 357x233mm Goi 100923 Goi 101575X

49.19 487x183mm Goi 100925 Goi 101638

42.42 - T40 390x390mm Goi 101082 Goi HC-GL

44.31 - T30 428x298mm Goi 100921 Goi 101252

T44 Goi 106328

44.44 - T46 428x428mm Goi 100981 Goi 101606

49.24 487x233mm Goi 100922

49.36 - T50 478x348mm Goi 100920 Goi 101651X

49.49 - T60 470x470mm Goi 100919 Goi 101240 Goi 101659

61.49 603x472mm Goi 100955

61.61 - T70 590x590mm Goi 100918 Goi 101237 Goi 101235 Goi 101674

75.61 718x593mm Goi 100954

79.79 762x762mm Goi 100969

44C - T19 440mm Goi 100982 Goi 105943 Goi 101615

49C 482mm Goi 104924

44CE 440mm Goi 104629

49.42E 480x390mm Goi 101426

Gasket for Small Goiot Cristal Hatches, per ft.: Goi HC-GS:
Black Neoprene Gasket is used on smaller Goiot Cristal Hatches (up to 357mm x 233mm (14" x 9 1/8") glass size). Round-top Gasket with flat bottom is 10mm wide x 10mm high, and is sold by the foot. RT10 95658

Gasket for Large Goiot Cristal Hatches, per ft.: Goi HC-GL:
Black Neoprene Gasket is only used on larger Goiot Cristal Hatches (390mm (15 3/8") square glass size, and larger) including Cristal Escape Hatches. Round-top Gasket with flat bottom is 12mm wide (with Base Lip) x 13mm high, and is sold by the foot. RT12 95659

Integration Hatch Parts
Parts used only on Goiot Integration Hatches are listed below. Other Integration Hatch parts are listed with Cristal & Integration Hatch Parts, above.

Small Handle Ass'y, Integration Hatch, Left: Goi HI-HLA:
Small Handle Ass'y, Integration Hatch, Right: Goi HI-HRA:
Small Gray plastic Handle Assembly used on Integration Hatches. Assembly includes Top Cap (20mm OD) w/ O-Ring and screw. Handles are (maximum) 31mm (1 1/4") wide x 53mm (2 1/8") long, and are marked P3103 (L) or P3102 (R). 101713

Stay Arm for Integration 46.33 Hatch: Goi HI-SA:
Stay Arm Assembly with Telescopic Aluminum Rod allows Hatch support for ventilation. Used only with Integration 46.33 Hatch, 1-piece Assembly includes plastic backing plate w/ (2) screws. 101692//94354

Replacement Acrylic Lens, Fly Screen & Gasket for Integration Hatches

Hatch #	Lens Size (max.)	Lens (Blue)	Lens (Blue) Frosted	Lens (Grey)	Fly Screen	Gasket
20.10	190x105mm	Goi 101083		Goi 120437	Goi 101496	Goi HI-GS
26.13	250x135mm	Goi 101086			Goi 101525	Goi HI-GS

25.25	268x248mm	Goi 101060				Goi PT-G8
33.14	335x164mm	Goi 101061			Goi 101544
33.19X	335x210mm	Goi 101065
41.17	409x185mm	Goi 101062			Goi 101588
46.33	445x335mm	Goi 101063
27C	280x265mm 226	Goi 101064	Goi 101348	Goi 101349	Goi 101535
33E	335x177mm	Goi 101059

Gasket for Small Goiot Integration Hatches, per ft.: Goi HI-GS:
Black Neoprene Gasket is used on smaller Goiot Integration Hatches (up to 250mm x 135mm (9 7/8" x 5 5/16") glass size). Round profile Gasket is 6mm (1/4") OD, and is sold by the foot. R6 95666

Gasket for Large Goiot Integration Hatches, per ft.: Goi PT-G8:
Black Neoprene Gasket is used on larger Goiot Integration Hatches (268mm x 248mm (10 1/2" x 9 3/4") glass size, and larger). Round profile Gasket is 8mm (5/16") OD, and is sold by the foot. HI-GL R8 95667

Opal Hatch Parts
Replacement parts for Goiot Opal & Opal Flush Hatches are listed below.
For parts not listed please contact us with measurements and details.

Small Handle for Opal Hatch - T20: Goi HO-HS:
Small Gray plastic Handle for Opal T00, T10, & T20 Hatches. Small Inside Handle is 115mm long x (maximum) 55mm wide. 115553

Inside Handle, Opal Hatch - Left: Goi HO-HL:
Left side Inside Handle is used on Goiot Opal T30 and larger Hatches. Gray plastic Inside Handle is 5 3/8" (135mm) long and includes Locking Button Assembly. 106889

Inside Handle, Opal Hatch - Right: Goi HO-HR:
Right side Inside Handle is used on Goiot Opal T30 and larger Hatches. Gray plastic Inside Handle is 5 3/8" (135mm) long and includes Locking Button Assembly. 106888

Handle Base for Opal Hatch: Goi HO-HB:
Handle Base is used with All Opal Hatch Inside Handles that do Not require an attachment for a Stay Arm. Gray plastic unit is 54mm OD x (maximum) 35mm high.

Handle Base w/ Stay Arm Bracket, Opal Hatch: Goi HO-HBSA:
Handle Base is used with All Opal Hatch Inside Handles that require an attachment for a Stay Arm. Gray plastic unit is 54mm OD x 75mm long x (maximum) 35mm high and includes 4mm x 22 Stay Arm attachment screw.

Opal Hatch Handle Latch: Goi HO-Latch:
Gray plastic Handle Latch is 50mm (2") long and attaches to Opal Hatch Frame with (2) 4mmm rivets on 26mm centers. 115905

Outside Handle, Opal Hatch - Left: Goi HO-HOSL:
Left Outside Handle is used on Opal Hatches T30 and larger. Gray plastic Left Outside Handle mates with Left Inside Handle, and is (maximum) 3 7/8" (98mm) long. 11527_

Outside Handle, Opal Hatch - Right: Goi HO-HOSR:
Right Outside Handle is used on Opal Hatches T30 and larger. Gray plastic Right Outside Handle mates with Right Inside Handle, and is (maximum) 3 7/8" (98mm) long. 11527_

Outside Cap for Opal Hatch: Goi HO-OC:
Outside Cap for Opal Hatch connects to All Inside Handles, and can be used to replace Outside Handles. Gray plastic Outside Cap is 60mm (2 3/8") OD and includes rubber O-Ring. 106894

Outside Cap w/ Winch Handle Hole Opal Hatch: Goi HO-OCW:
Outside Cap for Opal Hatch has Winch Handle Hole to allow opening from outside. Cap connects to All Inside Handles, and can be used to replace Outside Handles. Gray plastic Outside Cap is 60mm (2 3/8") OD and includes rubber O-Ring. 106895

Stay Arm - T00 Opal Hatch a=155mm: Goi HO-SA-T02:
Stay Arm - T03 Opal Hatch a=122mm: Goi HO-SA-T03:
Stay Arm - T10 Opal Hatch a=199mm: Goi HO-SA-T10:
Stay Arm - T20 Opal Hatch a=145mm: Goi HO-SA-T20:
Stay Arm - T30 Opal Hatch a=193mm: Goi HO-SA-T30:
Stay Arm - T40 Opal Hatch a=239mm: Goi HO-SA-T40:
Stay Arm - T44 Opal Hatch a=288mm: Goi HO-SA-T44:
Stay Arm - T50 Opal Hatch a=250mm: Goi HO-SA-T50:
Stay Arm - T54 Opal Hatch a=260mm: Goi HO-SA-T54:
Stay Arm - T60 Opal Hatch a=357mm: Goi HO-SA-T60:
Stay Arm - T65 Opal Hatch a=288mm: Goi HO-SA-T65:
Stay Arm - T70 Opal Hatch a=486mm: Goi HO-SA-T70:
Gray plastic Stay Assembly with Telescopic Aluminum Rod allows manually-adjustable Hatch support for ventilation. Lower end is attached to Hatch with quick-release Fastpin (order separately), allowing Hatch to be opened to 180�. T40 & larger Opal series Hatches use 2 Stay arms. The "a" dimension is the Length of the Aluminum Rod.

Fastpin for Opal Manual Stay Arm: Goi HO-SAF:
Fastpin for manually-adjustable Opal Hatch Stay Arm allows for easy detachment of Stay Arm from Hatch frame. Push-button Fastpin is 8mm dia. x 3/4" grip length and is 2" (50mm) long. Features Gray plastic knob. Used on Goiot Opal series Hatches.

Corner Base for Fastpin, Opal Stay Arm: Goi HO-SAB-C:
Gray plastic Fastpin Base for Opal T00 - T20 Hatches attaches directly to Frame corner and has 8mm hole to accept Fastpin for manually-adjustable Opal Hatch Stay Arm. Unit is (maximum) 67mm long and attaches to Hatch Frame with (2) 4mm rivets. 116642

Side Base for Fastpin, Opal Stay Arm: Goi HO-SAB-S:
Gray plastic Fastpin Base for Opal T30 and larger Hatches attaches directly to Frame side and has 8mm hole to accept Fastpin for manually-adjustable Opal Hatch Stay Arm. Unit is 48mm long and attaches to Hatch Frame with (2) 4mm rivets. 115904

SS Gas Piston Stay Arm for Opal Hatch: Goi HO-SAG-T__:
Pneumatic Gas Piston Stay Arm is available for all for Opal Hatches. Stainless Steel Automatic unit requires no manual adjustment. Please specify Hatch size or maximum uncompressed length.

Corner Base for Gas Piston Stay Arm: Goi HO-SAB-CT:
Gray plastic Base for Opal T00 - T20 Hatches with Gas Piston Stay Arm attaches directly to Frame corner and has 6mm threaded insert for Gas Piston Stay Arm screw. Unit is (maximum) 67mm long and attaches to Hatch Frame with (2) 4mm rivets.

Side Base for Gas Piston Stay Arm: Goi HO-SAB-ST:
Gray plastic Fastpin Base for Opal T30 and larger Hatches with Gas Piston Stay Arm attaches directly to Frame side and has 6mm threaded insert for Gas Piston Stay Arm screw. Unit is 48mm long and attaches to Hatch Frame with (2) 4mm rivets.

Stay Arm Hinge Ass'y for Opal Hatch - T20: Goi HO-SAHA:
Stay Arm Hinge Assembly for Opal T00, T03, T10, & T20 Hatches connects Stay Arm to the Lens. Gray plastic Hinge Assembly includes Hinge Base, screw, O-ring and Stay Arm Cap Goi HO-SAC. 115868

Stay Arm Cap for Opal Hatch - T20: Goi HO-SAC:
Stay Arm Hinge Cap for Opal T00, T03, T10, & T20 Hatches connects to Stay Arm hinge. Gray plastic Stay Arm Cap is 28mm OD and has imbedded brass insert threaded for a 5mm screw. 115919

Opal Hatch Hinge Ass'y: Goi HO-Hinge:
Aluminum Hinge Assembly for Goiot Opal Hatches. Assembly includes Hinge, and (2 ea.) bushings and spring clips. 117995

Replacement Acrylic Lens, Fly Screen & Gasket for standard Opal Hatches

Hatch # Cutout Size Lens Size Lens (Blue) Lens (Grey) Shade /
Fly Screen Gasket

T00 211x211mm 193x193mm Goi 106897 Goi HO-G

T03 231x176mm 213x158mm

T10 260x260mm 242x242mm Goi 106898 Goi 115175

T20 347x202mm Goi 106899 Goi 122260 Goi 115176

T30 457x327mm 440x310mm Goi 106900 Goi 115177

T40 421x421mm 403x403mm Goi 106901 Goi 115178

T44 442x442mm 425x425mm Goi 106902 Goi 115179

T50 507x377mm Goi 115180

T51 - D 518x378mm Goi 115450

T54 507x392mm 489x373mm Goi 106903 Goi 115181

T60 507x507mm 491x491mm Goi 106904 Goi 115182

T64 - D 530x430mm Goi 115451

T65 - Trap. 603x485mm 587x470mm Goi 106905 Goi 115183

T70 627x627mm 609x609mm Goi 106906 Goi 121957 Goi 115183

T12C 276mm

T18C 420mm

T19C 474mm

T22C 518mm 503mm Goi 115449

Gasket for Goiot Opal Hatches, per ft.: Goi HO-G:
Black Neoprene Gasket is used on all Goiot Opal Hatches. Rounded triangular Gasket is (maximum) 13.6mm wide x 12mm high, and is sold by the foot. RT13 ,106896

Replacement Acrylic Lens for Opal Flush Hatches

Hatch # Cutout Size Lens Size Lens (Grey) Lens (Grey)
Premium*

T10F / P 260x260mm 330x330mm Goi 116447

T20F / P 347x202mm 417x272mm Goi 117521

T30F 457x327mm 527x397mm ------------

T44F / P 442x442mm 512x512mm Goi 116448 Goi 116623

T54F / P 507x392mm 577x462mm

T60F / P 507x507mm 577x577mm Goi 116449 Goi 116624

T70F / P 627x627mm 697x697mm Goi 116625

T18CF 420mm 490mm Goi 116673 ------------

*Premium Flush (/P) Hatches are completely flush. *Premium Flush Lenses have recessed cut-outs for special Flush SS Hinges and (SS) Winch Handle Caps. Stay Arms and other components are as standard Opal Hatches.

Evolution Hatch Parts
Replacement parts for Goiot Evolution Hatches (produced from 1993 to 2001) are listed below.
For parts not listed please contact us with measurements and details.

Handle Ass'y, Evolution Hatch - Left Complete: Goi HE-HLA:
Left side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Evolution series. 9494A

Handle, Evolution Hatch - Left: Goi HE-HL:
Left side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Evolution series. 9494

Handle Ass'y, Evolution Hatch - Right Complete: Goi HE-HRA:
Right side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Evolution series. 9495A

Handle, Evolution - Right: Goi HE-HR:
Right side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Evolution series. 9495

Top Cap for Hatch Handle - Evolution, Cristal, Integration: Goi HC-TC:

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Cristal, Integration and Evolution series Hatches, O-rings are sold in packs of four (4) pieces.

Outside Handle for Hatch - Evolution, Cristal, Integration: Goi HC-HOS:

Stay Ass'y, Evolution Hatch: Goi HE-SA:
Gray plastic Stay Assembly allows Hatch support for ventilation. Includes 100mm (4") Stay Arm, Bracket and screw. Used on Goiot Evolution series. This item is no longer available and is shown here for identification only.

Hinge Pin Ass'y (Friction Set) - Small Pair: Goi HC-AS-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Unit is 50mm long, and includes Special Allen Head Nut, polymer spacer, and 5mm x 35mm screw. Set (2 pcs.) is used on Smaller Goiot Cristal and Evolution Hatches, as well as Cristal Ports. Fits Evolution Hatches # 23.23 & 32.18. 101706

Replacement Acrylic Lens & Gasket for Evolution Hatches

Hatch # Cutout Size Lens Size Lens (Blue) Gasket

23.23 260x260mm 254x254mm Goi 116528 Goi PC-G

32.18 347x202mm 341x197mm Goi 101003

43.30 457x327mm 442x312mm Goi 101004 Goi HC-GL

40.40 421x421mm 406x406mm Goi 101005

48.35 508x371mm 493x363mm Goi 101006

48.48 508x508mm 493x493mm Goi 101007

Gasket for Small Goiot Evolution Hatches, per ft.: Goi PC-G:
Black Neoprene Gasket is used on smaller Goiot Evolution Hatches (up to 341mm x 197mm (13 7/16" x 7 3/4") glass size). Round-top Gasket with flat bottom is 8mm wide x 7mm high, and is sold by the foot. HE-GS RT8 95663

Gasket for Large Goiot Evolution Hatches, per ft.: Goi HC-GL:
Black Neoprene Gasket is used on larger Goiot Evolution Hatches (406mm (16") square glass size, and larger). Round-top Gasket with flat bottom is 12mm wide (with Base Lip) x 13mm high, and is sold by the foot. HE-GL RT12 95659

~ Back to Goiot Hatches & Ports ~

~ Back to Hatches & Ports Main Page ~

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~

Your cart

Spars, Rigging, and Hardware for Sailboats