 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Specialty Cleats |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Specialty Cleats |
|
|
|
|
| Specialty Cleats | |
| A variety of Cleats for Special Applications are available.
If you require Cleats not listed, please forward a sketch or photo of your Cleat with measurements, hole spacing (to centers), full details of the part, boat model and year. See also: Cleats Main Page. |
|
|
|
|
| Downhaul Cleats Shroud Cleats Cleats on Slides |
|
|
|
|
| Downhaul Cleats | |
|
Downhaul Cleat Ass'y - 3 1/4" long, Black: K-1108: Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-1617-1 3 1/4" Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.
|
|
|
Downhaul Cleat Ass'y - 4" long, Black: K-1414: Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-10324 4" Spar Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.
|
|
|
|
|
| Shroud Cleats | |
|
Aladdin Shroud-Mount Cleat Ass'y: Mom 70-ACP: Named for its' resemblance to the famous lamp, this Shroud Cleat attaches to Wire or Rod rigging from 1/8" to 5/16" diameter with SS clamp. Molded plastic Cleat is 3 7/8" long x (maximum) 7/8" wide with a hole on one end for attachment of shackles or line. Ideal for flag halyards, radar reflectors, etc..
|
|
|
SS Shroud-Mount Cleat Ass'y - 4 1/2" long: Jon 40-518: Unique SS Shroud Cleat attaches to Wire or Rod rigging from 5/32" to 3/8" diameter with SS U-bolt. Stamped SS Cleat is 4 1/2" long x (maximum) 1" wide with a 5/8" hole on one end for attachment of shackles or line. Ideal for flag halyards, radar reflectors, etc..
|
|
|
|
|
| Cleats on Slides | |
|
SS Cleat on Slide for 1" T-Track: Sch 70-74: Cast Stainless Steel Cleat and Slide Assembly for 1" T-Track. Cleat is 6 1/2" long, unit features recessed Spring Pin to lock it in place anywhere along Track, Cleat is suitable for line up to 1/2". Ideal for mooring and spring lines, fenders, etc..
|
|
|
SS Cleat on Slide for 1 1/4" T-Track: Sch 70-75: Cast Stainless Steel Cleat and Slide Assembly for 1 1/4" T-Track. Cleat is 7 1/2" long, unit features recessed Spring Pin to lock it in place anywhere along Track, Cleat is suitable for line up to 5/8". Ideal for mooring and spring lines, fenders, etc..
|
|
|
Cleat on Slide for 1 1/4" T-Track: Sch 72-99X: Cast 8" Aluminum Cleat on Stainless Steel Slide for 1 1/4" T-Track. SS Slide is 6" long and features central thumb screw to lock it in place anywhere along Track, 8" Cleat is suitable for line up to 5/8". Ideal for mooring and spring lines, fenders, etc.. |
|