Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com        Ordering/Questions

Deck Organizer Blocks


Deck / Halyard Organizer Blocks
Deck Organizer or Halyard Organizer or Turning Blocks are primarily used lead Halyards and other lines back from the Mast to the Cockpit. Usually mounted on the cabin top, they are available in versions with anywhere from one to six Sheaves. Single-sheave Cheek Blocks are also commonly used in this application. See also: Foot Blocks, Cheek Blocks, Halyard Lead Blocks and other Blocks.

Rig-Rite stocks a large selection of Deck / Halyard Organizer Blocks from a variety of manufacturers, some are listed on this page. Some are listed separately by manufacturer:

FranceSpar / Sparcraft Deck Turning Blocks
Schaefer Deck Organizer Blocks

For Deck Organizer Blocks not listed, please contact us with complete information, including Manufacturer's part number or a sketch or photo of the item(s) with dimensions.
 


Deck Organizer Block w/ 1 5/8" Sheaves - Triple: Mer 2575-02D:

Merriman Deck / Halyard Organizer Block with 1 5/8" Delrin Sheaves for use with up to 7/16" line. Unit is 6 7/16" long x 1 3/4" wide x 7/8" high, and attaches to deck with (3) 1/4" (6mm) RH screws on 2" centers. Replacement Delrin Sheave, Mer S6.2D10-8, is 1 5/8" diameter x >5/8" (.650") wide x 1/2" ID. As used on a variety of boats in the 22-30' range.

 

 
Deck Organizer Block w/ 1 5/8" Alu. Sheaves - Triple: Mer 2575-02A:

Merriman Deck / Halyard Organizer Block with 1 5/8" Aluminum Sheaves for use with up to 7/16" line. Unit is 6 7/16" long x 1 3/4" wide x 7/8" high, and attaches to deck with (3) 1/4" (6mm) RH screws on 2" centers. Replacement Aluminum Sheave, Mer S6.2AV10-8, is 1 5/8" diameter x >5/8" (.668") wide x 1/2" ID. As used on a variety of boats in the 22-30' range.

 

 

Deck Organizer Block w/ 1 7/8" Alu. Sheaves - Double: NF 1233A:

Nicro-Fico Deck / Halyard Organizer Block with 1 7/8" Aluminum Sheaves. Unit is 5 1/2" long x 2" wide x 1 1/8" high, and attaches to deck with (2) 1/4" (6mm) RH screws on 2 1/4" centers. Aluminum Sheaves are 1 7/8" diameter x 13/16" wide, and are suitable for use with up to 5/8" line. As used on a variety of boats in the 25-35' range. Unit is marked FG 1233W.

 

 

Backing Plate for NF 1233A Deck Organizer: NF 14731:

 

 

SS Backing Plate for NF 1233 Double Deck / Halyard Organizer Blocks. SS Plate is 4 3/4" long x 2" wide w/ (2) 1/4" (6mm) holes on 2 1/4" centers.

 

 


Deck Organizer / Cheek Block w/ 1 1/2" Sheave - Single: RF 41811:

Deck Organizer Block w/ 1 1/2" Sheaves - Double: RF 41821:
Deck Organizer Block w/ 1 1/2" Sheaves - Triple: RF 41831:
Deck Organizer Block w/ 1 1/2" Sheaves - Quad: RF 41841:
Ronstan AP Deck / Halyard Organizer Block with 1 1/2" (40mm) Delrin Sheaves for use with up to 7/16" line. Unit is 1 9/16" wide x 13/16" high, and attaches to deck with (3-6) 1/4" (6mm) RH screws. Single is 2 5/8" long, Double is " long, Triple is ", and Quad is " long. Replacement Sheave, NF 1167SW, is 1 1/2" OD x 19/32" (.595") wide x 1/2" ID.

 


Deck Organizer Block w/ 2 5/16" Sheaves - Double: RF 61821:
Deck Organizer Block w/ 2 5/16" Sheaves - Triple: RF 61831:
Deck Organizer Block w/ 2 5/16" Sheaves - Quad: RF 61841:

Ronstan AP Deck / Halyard Organizer Block with 2 5/16" (60mm) Delrin Sheaves for use with up to 9/16" line. Unit is 2 3/8" wide x 1" high, and attaches to deck with (4-6) 5/16" (8mm) RH screws (purchase seperately) on 2 3/4" centers. Double is 6 1/2" long, Triple is 9 1/4", and Quad is 12" long. Replacement Sheave, RF 61000, is 2 3/8" x 3/4" wide x 9/16" (.565") ID.


~ Back to Blocks ~

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~